Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Au”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Interplanetary particles and fields, November 22 - December 6, 1977: Helios, Voyager, and IMP observations between 0.6 AU and 1.6 AU

The principal interplanetary events observed are described and analyzed. Three flow systems were observed: (1) a corotating stream and a stream interface associated with a coronal hole; (2) a shock wave and an energetic particle event associated with a 2-B flare; and (3) an isolated shock wave of uncertain origin. Data from 28 experiments and 6 spacecraft provide measurements of solar wind plasma, magnetic fields, plasma waves, radio waves, energetic electrons, and low energy protons.

Burlaga, L. F.↗
NASA NTRS1984

Large-scale interplanetary magnetic fields: Voyager 1 and 2 observations between 1 AU and 9.5 AU

The large-scale radial and temporal variations of the interplanetary magnetic field strength B observed by Voyagers 1 and 2 are discussed. Two components of the magnetic field strength were considered: (1) an average component, B sub zero, based on solar rotation averages, and (2) a fluctuation component, delta B, expressed by 10- or 24-hour averages of B normalized by the best-fit average field for the corresponding time and distance. Observations of the sector structure, interfaces, and shocks are presented to further describe magnetic field strength.

Burlaga, L. F.↗
NASA NTRS1984

Large-scale interplanetary magnetic fields - Voyager 1 and 2 observations between 1 AU and 9.5 AU

The large-scale radial and temporal variations of the interplanetary magnetic field strength B observed by Voyagers 1 and 2 are discussed. Two components of the magnetic field strength were considered: (1) an average component, B sub zero, based on solar rotation averages, and (2) a fluctuation component, delta B, expressed by 10- or 24-hour averages of B normalized by the best-fit average field for the corresponding time and distance. Observations of the sector structure, interfaces, and shocks are presented to further describe magnetic field strength.

Burlaga, L. F.↗
NASA NTRS1992

Propagation of a large Forbush decrease in cosmic-ray intensity past the earth, Pioneer 11 at 34 AU and Pioneer 10 at 53 AU

Observations of a large Forbush decrease in cosmic-ray intensity at the earth, Pioneer II and Pioneer 10 are reported. The Pioneer 10 data show a large impulsive decrease in cosmic-ray intensity at the greatest distance from the sun observed to date. The apparent radial speed of propagation of the Forbush decrease was about 820 km/s, independent of the radial distance. The observations reported here and similar previous observations provide the basis for a new quantitative model of the propagation of Forbush decreases in the outer heliosphere.

Van Allen, James A.↗
DOE OSTI2021

CO and H 2 adsorption on Au-Ni bimetallic surfaces: a combined experimental and DFT theoretical study

Au-Ni bimetallic thin films were grown on refractory metal substrates. CO and H 2 adsorption on Au-Ni bimetallic surfaces have been studied by a combination of in situ polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS), temperature-programmed desorption (TPD), and density functional theory (DFT) calculations. It is found CO desorption peak shifts from 413 K on pure Ni surfaces to 293 K on the isolated Ni atoms formed by alloying with Au atoms. The sharp decrease of CO desorption temperature on Au-Ni surfaces with increasing Au coverage is caused by the change of the favored CO adsorption sites from bridge/hollow sites on pure Ni surfaces to Ni top sites on Au-Ni bimetallic surfaces. In situ PM-IRRAS shows two CO adsorption bands on Au sites at 2119 cm −1 and 2103 cm −1 on Au-Ni surfaces at 80 K, which are due to CO bound on under-coordinated Au atoms and electron negatively charged Au sites modified with nearby Ni atoms, respectively. Even with the Au-Ni surface temperature at as low as 100 K, CO adsorption induced Ni surface segregation has been observed by in situ PM-IRRAS. Furthermore, DFT calculation results discover the adsorption energy of CO on Ni top sites continues to decrease with increasing Au coverage due to the geometric ensemble effect and the lowered d-band center after Ni alloying with Au. H 2 desorption temperature decreases from 363 K on pure Ni thin films to 302 K with increasing Au coverage to 0.6 ML. A new H 2 peak appears at around 170 K on the Au-Ni surfaces with Au coverages between 0.6 ML and 0.9 ML. This new H 2 TPD peak is assigned to H 2 desorption from the totally isolated Ni sites. With Au coverage above 1.5 ML, there is no any H 2 desorption detected. Finally, the combined surface science studies and DFT calculations provide new insights into the surface structure-activity correlation of Ni-base bimetallic surface alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Photonuclear cross sections for 197 Au: An update on the gold standard

Cross sections for the 197 Au(γ, n) reaction are broadly used in nuclear physics as a standard for normalizing photonuclear reaction cross-section data at photon beam energies above approximately 8 MeV. In this paper, we report cross-section measurements for the 197 Au(γ, n) 196 Au g+m1 reaction at beam energies from 13 to 31 MeV. Our measurements provide the first cross-section data for this reaction at beam energies above 20 MeV, enabling the use of this reaction as a cross-section standard up to 30 MeV. Also, this work provides first cross-section measurements for the 197 Au(γ, n) 196 Au m2 reaction. In addition, we measured cross-section data for the 197 Au(γ, 3n) 194 Au reaction, which can be used as a cross-section standard above about 25 MeV. These measurements were performed using a new target activation method that is based on the angle-energy correlation of the laser Compton- scattered photon beams at the High Intensity Gamma-ray Source (HIγS). The technique enables measuring photonuclear reaction cross-sections at several discrete beam energies concurrently via a single irradiation on a stack of different targets. Measurements were carried out by irradiating a stack of concentric-ring targets consisting of Au, TiO 2 , Zn, Os, and Au (in order of the γ-ray beam direction). Our data for the 197 Au(γ,n) 196 Au g+m1 reaction in the energy range of 13 to 20 MeV are in good agreement with existing ones measured using monoenergetic γ-ray beams, but differ from data acquired using a bremsstrahlung γ-ray beam. Also, above 18 MeV, our data for the 197 Au(γ,n) 196 Au g+m1 and 197 Au(γ,n) 196 Au m2 reactions differ significantly from the most recent TENDL and JENDL evaluations, suggesting a need to update these data libraries. Furthermore, the TENDL evaluation and existing data are consistent with our data for the 197 Au(γ,3n) reaction, but differ significantly from the JENDL evaluation above 26 MeV.

190 ≤ A ≤ 219↗
NASA NTRS2009

Long Term Measurement of the Vapor Pressure of Gold in the Au-C System

Incorporating the {Au(s,l) + graphite} reference in component activity measurements made with the multiple effusion-cell vapor source mass spectrometry (multicell KEMS) technique provides a fixed temperature defining ITS-90 (T(sub mp)(Au) = 1337.33K) and a systematic method to check accuracy. Over a 2 year period delta H sub(298)Au was determined by the 2nd and 3rd law methods in 25 separate experiments and were in the ranges 362.2 plus or minus 3.3 kJmol(sup -1) and 367.8 plus or minus 1.1 kJmol(sup -1), respectively. This 5 kJmol-1 discrepancy is transferred directly to the measured activities. This is unacceptable and the source of this discrepancy needs to be understood and corrected. Accepting the 2nd law value increases p(Au) by about 50 percent, brings the 2nd and 3rd law values into agreement and removes the T dependence in the 3rd law values. While compelling, there is no way to independently determine instrument sensitivities, S(sub Au), with T in a single experiment with KEMS. This lack of capability is stopping a deeper understanding of this problem. In addition, the Au-C phase diagram suggests a eutectic invariant reaction: L-Au(4.7at%C) = FCC-Au(0.08at%C) + C(graphite) at T(sub e) approximately 1323K. This high C concentration in Au(l) must reduce p(Au) in equilibrium with {Au(s,l) + graphite} and raises some critical questions about the Gibbs free energy functions of Au(s,l) and the Au fixed point (T(sub mp)(Au) = 1337.33K) which is always measured in graphite.

Copland, Evan H.↗
DOE OSTI2020

Ligand accommodation causes the anti-centrosymmetric structure of Au 13 Cu 4 clusters with near-infrared emission

Here, we synthesized an [Au 13 Cu 4 (PPh 3 ) 4 (SPy) 8 ] + nanocluster co-capped by phosphine and thiolate ligands. Interestingly, this Au 13 Cu 4 cluster corresponds to an anti-centrosymmetric structure with the four copper atoms coordinated to the mixed ligands on the same side of the Au 13 icosahedron, which is in sharp contrast to the [Au 13 Cu 4 (PPh 2 Py) 4 (SPhtBu) 8 ] + and [Au 13 Cu 2 (PPh 3 ) 6 (SPy) 6 ] + clusters which possess highly symmetric structures with well-separated Cu adatoms. Both [Au 13 Cu 4 (PPh 3 ) 4 (SPy) 8 ] + and [Au 13 Cu 2 (PPh 3 ) 6 (SPy) 6 ] + clusters correspond to 8 valence electron superatoms with large HOMO–LUMO gaps, respectively. The difference in structure is rooted in the nature of the mixed ligands, with the bidentate SPy binding strongly to Cu on both binding sites (–N–Cu and Au-SR-Cu) leading to the co-linking of adjacent Cu atoms, while the bidentate PPh 2 Py binds Cu on one site and Au on the other giving rise to a separation of the Cu atoms even in the presence of relatively higher monomer concentration. Both [Au 13 Cu 4 (PPh 3 ) 4 (SPy) 8 ] + and [Au 13 Cu 2 (PPh 3 ) 6 (SPy) 6 ] + display emissions in the near-IR regions. TD-DFT calculations reproduce the spectroscopic results with specified excited states, shedding light on the geometric and electronic behaviors of the ligand-protected Au 13 M x clusters.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Magnetic anisotropy in single-crystalline antiferromagnetic Mn 2 Au

Multiple recent studies have identified the metallic antiferromagnet Mn 2 ⁢Au to be a candidate for spintronic applications due to apparent in-plane anisotropy, preserved magnetic properties above room temperature, and current-induced Néel vector switching. Crystal growth is complicated by the fact that Mn 2 ⁢Au melts incongruently. We present a bismuth flux method to grow millimeter-scale bulk single crystals of Mn 2 ⁢Au in order to examine the intrinsic anisotropic electrical and magnetic properties. Flux quenching experiments reveal that the Mn 2 ⁢Au crystals precipitate below 550°⁢C, about 100⁢°⁢C below the decomposition temperature of Mn 2 ⁢Au. Bulk Mn 2 ⁢Au crystals have a room-temperature resistivity of 16–19 µ⁢Ωcm and a residual resistivity ratio of 41. Mn 2 ⁢Au crystals have a dimensionless susceptibility on the order of 10 –4 (SI units), comparable to calculated and experimental reports on powder samples. Single-crystal neutron diffraction confirms the in-plane magnetic structure. The tetragonal symmetry of Mn 2 ⁢Au constrains the ab-plane magnetic susceptibility to be constant, meaning that χ 100 =χ 110 in the low-field limit, below any spin-flop transition. We find that three measured magnetic susceptibilities χ 100 , χ 110 , and χ 001 are the same order of magnitude and agree with the calculated prediction, meaning the low-field susceptibility of Mn 2 ⁢Au is quite isotropic, despite clear differences in ab-plane and ac-plane magnetocrystalline anisotropy. Mn 2 ⁢Au is calculated to have an extremely high in-plane spin-flop field above 30 T, which is much larger than that of another in-plane antiferromagnet, Fe 2 ⁢As (less than 1 T). Finally, the subtle anisotropy of intrinsic susceptibilities may lead to dominating effects from shape, crystalline texture, strain, and defects in devices that attempt spin readout in Mn 2⁢ Au.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Measurement of cold nuclear matter effects for inclusive J / ψ in p +Au collisions at s NN = 200 GeV

Measurement by the STAR experiment at RHIC of the cold nuclear matter (CNM) effects experienced by inclusive J / ψ at mid-rapidity in 0-100% p +Au collisions at s NN = 200 GeV is presented. Such effects are quantified utilizing the nuclear modification factor, R p Au , obtained by taking a ratio of J / ψ yield in p +Au collisions to that in p + p collisions scaled by the number of binary nucleon-nucleon collisions. The differential J / ψ yield in both p + p and p +Au collisions is measured through the dimuon decay channel, taking advantage of the trigger capability provided by the Muon Telescope Detector in the RHIC 2015 run. Consequently, the J / ψ R p Au is derived within the transverse momentum ( p T ) range of 0 to 10 GeV/ c . A suppression of approximately 30% is observed for p T < 2 GeV/ c , while J / ψ R p Au becomes compatible with unity for p T greater than 3 GeV/ c , indicating the J / ψ yield is minimally affected by the CNM effects at high p T . Comparison to a similar measurement from 0-20% central Au+Au collisions reveals that the observed strong J / ψ suppression above 3 GeV/ c is mostly due to the hot medium effects, providing strong evidence for the formation of the quark-gluon plasma in these collisions. Several model calculations show qualitative agreement with the measured J / ψ R p Au , while their agreement with the J / ψ yields in p + p and p +Au collisions is worse.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Electronic Structure of the Au Nanoparticle-TiO 2 Heterojunction: Influence of Nanoparticle Size, Shape, Oxygen Vacancies, and Temperature

The electronic structure of the gold nanoparticle-titanium dioxide (AuNP-TiO 2 ) heterojunction plays a critical role for charge transfer and recombination dynamics that underpin its photocatalytic function. However, building a representative model to capture the key physics remains a significant challenge. Here, we investigate the influence of the AuNP size and shape, as well as oxygen vacancy (V O ) defects at the anatase-phase TiO 2 (101) surface and the temperature of the heterojunction, on its interfacial electronic properties. Using density functional theory (DFT), we compare the closed-shell Au 20 and open-shell Au 19 clusters interfaced with pristine and V O defect TiO 2 surfaces. We find that the presence of a V O defect transforms pure TiO 2 from a p-type to an n-type semiconductor, reversing the interfacial band bending from downward to upward. For the heterosystem, density of states (DOS) analysis shows that V O minimally affects the open-shell Au 19 -TiO 2 system, but it significantly alters the closed-shell Au 20 -TiO 2 system, converting it from p-type to n-type at the Γ-point at 0 K. Furthermore, ab initio molecular dynamics (AIMD) simulations at 300 K reveal significant thermal fluctuations in AuNP positions relative to the TiO 2 surface. These fluctuations result in dynamic variations in the gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) in all systems studied: Au 19 NP-Pristine TiO 2 , Au 20 NP-Pristine TiO 2 , Au 19 NP-V O defect TiO 2 , and Au 20 NP-V O defect TiO 2 . Complementary Bader charge analysis performed at both 0 K and finite-temperature AIMD snapshots supports the emergence of an upward band bending and the formation of a Schottky barrier at the V O containing heterojunctions. Notably, we find that at finite temperature, an Au atom can dynamically passivate the V O , leading to a pronounced widening of the HOMO-LUMO gap in the AuNP-V O defect TiO 2 heterojunctions. Our computational findings underscore the pivotal role of the V O defect and thermal effects in modulating interfacial band alignment, electronic states, and HOMO-LUMO gaps, providing insights for designing Au-TiO 2 heterojunctions with tailored electronic properties.

Mora Perez, Carlos [Lawrence Berkeley National Lab↗
DOE OSTI2025

Au 76 (SC 6 H 4 - p -CH 3 ) 42 Square Quantum Platelet: One-Dimensional Growth of Quantum Rods Turns 90 Degrees

The growth pattern of atomically precise nanoclusters (NCs) is of fundamental interest, and the structural effect on their photoluminescence (PL) is important owing to their PL in the second near-infrared (NIR-II) range (900–1700 nm optoelectronically or 1000–1700 nm biologically) that holds great promise for optoelectronic and biomedical applications. Because of the small energy gaps required for NIR-II emission, the PL performance of NIR-II luminophores is largely limited by nonradiative processes. In this work, we discovered a Au 76 (p-MBT) 42 (Au 76 ) (p-MBTH = p-methylbenzenethiol) nanocluster featuring a face-centered cubic (fcc) core in a square shape (edge length: 1 nm). This square quantum platelet can be viewed as a side-facet (010) growth of the Au 52 (p-MBT) 32 (Au 52 ) rod, as opposed to the (001) facet growth. We found that Au 76 exhibits bright emission centered at 970 nm with a PL quantum yield (PLQY) of 30% in solution under ambient conditions, which can be further enhanced to 40% when the solution is deaerated. X-ray crystallography analysis coupled with time-resolved spectroscopy revealed that the nearly doubled PLQY compared to Au 52 (18.3%) was resulted from shorter Au–Au bond lengths in Au 76 (average 2.835 Å) than that in Au 52 (3.04 Å). This work provides important insights into the design of highly luminescent NCs, which are promising for photovoltaics, photocatalysis, and optoelectronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Oxygen isotope evidence for input of magmatic fluids and precipitation of Au-Ag-tellurides in an otherwise ordinary adularia-sericite epithermal system in NE China

Abstract Tellurium-rich (Te) adularia-sericite epithermal Au-Ag deposits are an important current and future source of precious and critical metals. However, the source and evolution of ore-forming fluids in these deposits are masked by traditional bulk analysis of quartz oxygen isotope ratios that homogenize fine-scale textures and growth zones. To advance understanding of the source of Te and precious metals, herein, we use petrographic and cathodoluminescence (CL) images of such textures and growth zones to guide high spatial resolution secondary ion mass spectroscopy (SIMS) oxygen isotope analyses (10 µm spot) and spatially correlated fluid inclusion microthermometric measurements on successive quartz bands in contemporary Te-rich and Te-poor adularia-sericite (-quartz) epithermal Au-Ag vein deposits in northeastern China. The results show that large positive oxygen isotope shifts from –7.1 to +7.7‰ in quartz rims are followed by precipitation of Au-Ag telluride minerals in the Te-rich deposit, whereas small oxygen isotope shifts of only 4‰ (–2.2 to +1.6‰) were detected in quartz associated with Au-Ag minerals in the Te-poor deposits. Moreover, fluid-inclusion homogenization temperatures are higher in comb quartz rims (avg. 266.4 to 277.5 °C) followed by Au-Ag telluride minerals than in previous stages (~250 °C) in the Te-rich deposit. The Te-poor deposit has a consistent temperature (~245 °C) in quartz that pre- and postdates Au-Ag minerals. Together, the coupled increase in oxygen isotope ratios and homogenization temperatures followed by precipitation of Au-Ag tellurides strongly supports that inputs of magmatic fluid containing Au, Ag, and Te into barren meteoric water-dominated flow systems are critical to the formation of Te-rich adularia-sericite epithermal Au-Ag deposits. In contrast, Te-poor adularia-sericite epithermal Au-Ag deposits show little or no oxygen isotope or fluid-inclusion evidence for inputs of magmatic fluid.

Geochemistry & Geophysics↗