Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Al2O3”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Influence of Joule Heating on the Stability of High Temperature Irradiation Resistant Thermocouples

Development of in-core instrumentation is driven by the pursuit of safer and more economic energy production from both existing nuclear reactors and Generation IV reactor designs. Idaho National Laboratory (INL) has developed high temperature irradiation resistant thermocouples (HTIR-TCs) for temperature sensing inside Generation IV nuclear reactors. These thermocouples are composed of phosphorus-doped niobium (Nb-P) and lanthana-doped molybdenum (Mo-LaO) thermoelements, an alumina (Al2O3) insulation, and a niobium sheath. HTIR-TCs require an initial heat treatment exceeding the maximum service temperature to stabilize the generated electromotive force (EMF) signal; however, the mechanism behind this stabilization is not well understood. This work evaluates the impact of Joule heating on the thermoelements' microstructures, chemical stability, and mechanical properties to determine the mechanisms by which the EMF signal stabilization occurs. Accordingly, during the Joule heat treatment, a secondary Nb3P phase coarsened along the length of the Nb-P thermoelement, along with the formation of an interaction region at the Al2O3/niobium interface. The interaction between the alumina insulation and the Nb-P thermoelement was also observed within the Mo-LaO thermoelement. Joule heating induced stability within the generated EMF signal of HTIR-TCs through the formation of secondary phases within the Nb-P and the interaction of the alumina insulation with the thermoelements.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗
DOE OSTI2024

Influence of Joule Heating on the Stability of High Temperature Irradiation-resistant Thermocouples

Development of in-core instrumentation is driven by the pursuit of safer, more economic energy production from the perspective of both existing nuclear reactors and Generation IV reactor designs. Idaho National Laboratory has developed high-temperature irradiation-resistant thermocouples (HTIR-TCs) for temperature sensing inside Generation IV nuclear reactors. These thermocouples are composed of phosphorus-doped niobium (Nb-P) and lanthana-doped molybdenum (Mo-LaO) thermoelements, an alumina (Al2O3) insulation, and a niobium sheath. HTIR-TCs require an initial heat treatment exceeding the maximum service temperature to stabilize the generated electromotive force (EMF) signal. The mechanism behind the stabilization of the HTIR-TCs through traditional heat treatment methods is understood; however, the traditional heat treatment method is expensive, time consuming, and results in a heterogeneous microstructure. Therefore, we investigated a rapid method for stabilization and microstructure homogeneity, through Joule heating. This work evaluates the impact of Joule heating on the thermoelements’ microstructures, chemical stability, and mechanical properties so as to determine the mechanisms by which stabilization of the EMF signal occurs. Accordingly, during the Joule heat treatment, a secondary Nb3P phase coarsened along the length of the Nb-P thermoelement, along with the formation of an interaction region at the Al2O3/niobium interface. The interaction between the alumina insulation and the Nb-P thermoelement was also observed within the Mo-LaO thermoelement. Joule heating induced stability within the generated HTIR-TC EMF signal via the formation of secondary phases within the Nb-P and the interaction between the alumina insulation and the thermoelements.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗
DOE OSTI2025

Boosting Hydrogenation of CO 2 Using Cationic Cu Atomically Dispersed on 2D γ‐Al 2 O 3 Nanosheets

The continuous development of novel catalytic approaches is crucial for advancing efficient CO 2 hydrogenation processes. Drawing inspiration from single-atom catalysis and 2D materials, we designed a new 2D single-atom catalyst with excellent thermal stability by thermally treating Cu-adsorbed γ-AlOOH nanosheets, which yielded a Cu/γ-Al 2 O 3 catalyst with high activity in the hydrogenation of CO 2 -yielding methanol (CH 3 OH), dimethyl ether (DME), and CO as products. The active Cu sites are monodispersed and highly stable due to their cationic oxidation state and their substitution for pentacoordinated aluminum (Al P ) sites on particle surfaces. This study demonstrates an efficient approach for achieving a high CO 2 hydrogenation rate (30.45 mol mol −1 h −1 ) using a catalyst system that lacks metallic Cu centers, traditionally considered essential for H₂ dissociation, and employs what was previously thought to be an inert metal oxide (γ-Al 2 O 3 ) for CO and CH 3 OH production. Ongoing mechanistic studies aim to elucidate the synergy between cationic Cu single atoms and γ-Al 2 O 3 , a Lewis acid support, in facilitating hydrogen (H 2 ) activation and methanol formation.

2D catalyst↗
DOE OSTI2025

Support of Adhesion Mechanisms in Al 2 O 3 Aerosol Deposition Through Laser-Induced Particle Impact Testing

Aerosol deposition (AD) is a kinetic spray process capable of depositing ceramic coatings at room temperature, but AD process development is generally a laborious exploration of a large process parameter space. Here, this paper presents a case study investigating whether laser-induced particle impact testing (LIPIT) could be applied to expedite development of an alumina (Al 2 O 3 ) coating on nickel (Ni): Specifically, whether LIPIT measurements could predict critical velocities of adhesion on Ni and Al 2 O 3 , and the effect of ball milling the Al 2 O 3 powder. Because LIPIT has a diffraction-limited lower bound on imageable particle size, the usefulness of Al 2 O 3 powder agglomerates as a proxy for single particles was additionally studied. Overall, LIPIT measurements and AD sprays agreed that ball milling dramatically improves adhesion. Additionally, LIPIT measurements of critical velocity of adhesion of Al 2 O 3 powder agglomerates on Ni and Al 2 O 3 substrates (150 meters per second [m/s] and 250 m/s, respectively) quantitatively agreed with predictions from a previously published model based on picoindentation and molecular dynamics simulations. Together, these findings support the established hypothesis that Al 2 O 3 adheres via a dislocation-mediated mechanism in AD, that Al 2 O 3 powder agglomerates adhere as individual constituent particles rather than collectively, and that, for this case study, LIPIT measurements were predictive of AD process parameters.

Al2O3↗
DOE OSTI2024

Atomistic simulations to reveal HIP-bonding mechanisms of Al6061/Al6061

Molecular dynamics simulations were employed to understand the diffusion bonding process during hot isostatic pressing (HIP) of Al6061/Al6061 alloy. Simulations of the HIP process reveal atomistic phenomena that are difficult or unlikely to be observed experimentally and provide useful insights into the mechanism of diffusion and bonding. Here, the results reveal that at the start of the HIP process, a massive incursion of oxygen atoms occurs from the pre-existing γ-Al 2 O 3 to the 6061 region across the interphase interface. These oxygen atoms interact with the enriched Mg atom layer present at the existing γ-Al 2 O 3 and 6061 matrix to form a secondary complex Mg 2 Al 2 O 5 phase. Diffusion calculations also show that transport of atoms due to the applied pressure is 4–5 orders of magnitude higher than would occur in the absence of HIP conditions. The Mg 2 Al 2 O 5 phase also provides efficient pathways for the rapid transport of Mg atoms. Because of the higher diffusion coefficients observed for Mg within the phase, Mg atoms can move more swiftly compared to their diffusion within other phases such as γ-Al 2 O 3 . This accelerated mobility facilitates the rapid movement of Mg atoms across the interface, leading to changes in the local composition and the potential growth of the Mg 2 Al 2 O 5 phase.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Improving stability of ALD ZrN thin film coatings over U-Mo dispersion fuel

Atomic layer deposition (ALD) of ZrN is a candidate technology for coating U-Mo dispersion fuel as a diffusion barrier coating. During the early development stages of the coating the ZrN deposition showed to be mechanically unstable and ultimately resulted in spalling. Based on experimental outcomes it was found that instabillity can be eliminated through the introduction of a thin amorphous (a) Al 2 O 3 interlayer coating deposited in between the ~1-μm thick ZrN and the U-Mo. substrate. To elucidate these findings simulations were performed with density functional theory (DFT) to measure work of adhesions at different interfaces while finite element modeling (FEM) was performed to measure the residual stress distribution. DFT indicated that the ZrN coating deposited over (a)-Al 2 O 3 is ~2.5 times stronger when compared to direct deposition over U or UO 2 substrate. While calculations from FEM recognized; (1) large stress concentrations can originate from the irregularly distributed native surface oxides (UO 2 ) over U-Mo and (2) stress concentrations can be reduced if those surface UO 2 can be modified to a uniform layer (achieved after application of a 8 nm (a)-Al 2 O 3 interlayer). These results provided explanations and confirmed the role played by interlayer in eliminating the original mechanical instability of the ZrN.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Optimization and understanding of ZnO nanoarray supported Cu-ZnO-Al 2 O 3 catalyst for enhanced CO 2 -methanol conversion at low temperature and pressure

Cu-ZnO-Al 2 O 3 is the most widely applied catalyst for CO 2 hydrogenation to methanol. However, it is still a challenge to produce methanol using this catalyst under low-temperature (<250 °C) and low-pressure (<10 bar) conditions with desirable yield and selectivity. In this work, by tuning the experimental processing parameters such as solvent, loading amount, and annealing temperature, highly improved ZnO nanoarray supported Cu-ZnO-Al 2 O 3 catalysts have been successfully demonstrated. Here, by using organic solvent (N,N-dimethylformamide (DMF), acetone, or isopropanol) for dip-coating loading process instead of deionized (DI) water, Cu-ZnO-Al 2 O 3 nanocatalysts was comparatively better dispersed on the nanorod array support with populated and abundant active sites, thus enhancing the methanol yield. With the control of the loading amount and annealing temperature, finely distributed Cu nanoparticles were obtained on the ZnO nanorod surfaces to enhance the interactions between Cu and ZnO nanorod surfaces. Further improvement of the catalyst performance is demonstrated by tuning the reaction space velocity. At 200 °C and 10 bar conditions, the optimized catalyst achieved a methanol yield of 6.46 mol h –1 kg –1 with 100 % selectivity. The good stability after prolonged testing of the catalysts demonstrates the potential practical implementation. The in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) measurements under the 1 bar reveal that the CO 2 hydrogenation to methanol on the ZnO nanoarray supported Cu-ZnO-Al 2 O 3 catalyst follows the CO reaction pathway, due to the surface oxygen vacancies on ZnO nanorods which facilitate CO 2 dissociation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Revealing the corrosion mechanism of an Al 0.1 CoCrFeNi high entropy alloy in high temperature carbon dioxide environment

The corrosion behavior of an Al 0.1 CoCrFeNi HEA in high temperature CO 2 at 850 °C for different exposure periods was investigated using different characterization methods. Further, weight gain increased with extended exposure periods, yet it remained lower than most conventional alloys. A double-layer oxide film consisting of Cr 2 O 3 and Al 2 O 3 formed after 100 and 500 h of exposure, while a single layer of Cr 2 O 3 developed after 1000 h of exposure. CoCrFeNi particles with an FCC structure were embedded in the oxide films irrespective of the exposure periods. Moreover, a transition zone containing numerous striped-like Al 2 O 3 oxides along the grain boundaries was developed underneath the oxide films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Structure and dynamics of ILs-based gel polymer electrolytes and its enhanced conductive properties with the incorporation of Al 2 O 3 nanofibers

Here, this work reports the enhanced mobility of ions in ionic liquid (IL)-based gel polymer electrolytes (GPEs) with the incorporation of Al 2 O 3 nanofibers. A combination of PVDF-HFP, EMIMTFSI and LiTFSI with 3 wt% Al 2 O 3 nanofibers has been prepared through solution casting technique. The room temperature ionic conductivity of PVDF-HFP: ILs electrolyte (45:55, weight ratio of 0.82) (GPE) is found to be 2.7 × 10 –5 S cm –1 , which increases up to 7.8 × 10 –5 S cm –1 in Al 2 O 3 containing GPE (Al-GPE). Pulsed field gradient (PFG) NMR results validate the increased ionic conductivity observed in Al-GPE. We found that the diffusivity of Li + , TFSI – and EMIM + increases when Al 2 O 3 nanofibers are well-distributed in the GPE matrix. The surface morphology and the amorphicity of GPEs are examined through SEM and XRD analyses. Lastly, the local structure of Al 2 O 3 fibers and the molecular-level interactions of ions with polymer, and their effect on the diffusivity of ions are established through solid-state NMR detecting 27 Al, 1 H, 13 C, 19 F nuclei including 2D 13 C{ 1 H} HETCOR NMR experiments. The 13 C DPMAS and CPMAS experiments highlight the dynamic heterogeneity associated with the ions that are embedded in the rigid and the mobile phase of GPEs. While some of the ionic species strongly interact with polymer chains in the rigid environment, the majority of them reside in the mobile phase and contribute to the overall increased conductivity. Most importantly, Al 2 O 3 nanofibers significantly affect the dynamics of ionic species that are present in the mobile phase between the polymer chains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Carboxyl-functionalized perovskite enables ALD growth of a compact and uniform ion migration barrier

Mixed-halide wide-band-gap perovskites are critical components of highly efficient tandem cells, but their operating stability is limited by halide migration. Metal oxides deposited via atomic layer deposition (ALD) have been shown to block halide migration; however, previously pursued methods result in inhomogeneous nucleation and growth. We hypothesized that functionalizing the perovskite surface with ALD-active carboxyl groups could promote nucleation and enable higher-temperature metal oxide growth. We find that 5-ammonium valeric acid iodide (5-AVAI) facilitates the formation of a compact and uniform aluminum oxide (Al 2 O 3 ) layer and allows growth at 100°C compared with the previous limit of 75°C. We demonstrate that halide migration into the C 60 electron transport layer is reduced by a factor of 10 compared with the reference case. Finally, Al 2 O 3 -capped perovskite solar cells with a band gap of 1.78 eV retain 90% of their initial power conversion efficiency after 1,000 h of continuous operation under 1-sun illumination at 55°C.

Al2O3↗
DOE OSTI2020

Comparison of passivation properties of plasma-assisted ALD and APCVD deposited Al 2 O 3 with SiN x capping

In this paper, we report on the direct comparison of Al 2 O 3 films deposited by plasma-assisted atomic layer deposition (ALD) and atmospheric pressure chemical vapor deposition (APCVD) techniques on the passivation properties of both bare and boron diffused Si surfaces. It is found that ALD and APCVD deposited Al 2 O 3 layers with SiN x capping have very similar chemical composition, hydrogen concentration at the Al 2 O 3 /Si interface, and interface defect density (D it ), but the ALD film has slightly higher negative fixed charge (Q f ) after a high temperature (~750 °C) contact firing cycle typically used for solar cell fabrication. Both films showed excellent surface recombination velocities of <5 cm/s on planar and textured un-diffused Si wafers, but the ALD films gave 1 to 8 fA/cm 2 lower emitter saturation current densities (J 0e ) on implanted boron emitters with sheet resistance in the range of 90–180 Ω/. This is attributed to the observed slightly higher negative charge-induced field-effect passivation in the ALD films. However, SiN x /Al 2 O 3 /p + /n/n + passivated emitter rear totally diffused (PERT) cell structures fabricated with 110 and 150 Ω/ emitter in this study showed no appreciable difference in cell efficiency. Device analysis and simulations showed that even for >23% high-performance solar cells design, with very low bulk and rear contact recombination, the observed small difference in J 0e has negligible effect on cell efficiency. Furthermore, APCVD Al 2 O 3 passivation of B emitter can produce comparable efficiencies to their counterpart ALD Al 2 O 3 passivated n-type Si solar cells.

14 SOLAR ENERGY↗
DOE OSTI2025

Impacts of Focused Ion Beam Processing on the Fabrication of Nanoscale Functionalized Probes

Herein, we examine the impact of Ga + ion kinetic energy and the target material type on the extent of ion implantation and structural damage in atomic force microscopy probes made of Al 2 O 3 and ZnO manufactured by focused ion beam (FIB) using scanning transmission electron microscopy and energy-dispersive X-ray mapping. Penetration of Ga into the Al 2 O 3 lattice induced structural distortions and amorphization. For ZnO probes, Ga is uniformly dispersed across the surface, resulting in the formation of distinct clusters. Atom probe tomography further validates the Ga distributions in Al 2 O 3 and ZnO nanoprobes. Complementary Monte Carlo simulations with the transport of ions in the matter program indicated that the introduction of Ga + prompts the generation of cation and anion vacancies, an occurrence more pronounced in Al 2 O 3 compared to ZnO. In conclusion, this study not only enriches the knowledge of ion-matter interactions, but also serves as a practical guide for the fabrication of nanoscale functionalized AFM probes.

Al2O3↗
DOE OSTI2023

Ab Initio Molecular Dynamics Study of Pd Nucleation on a γ-Al 2 O 3 Surface

We perform ab initio molecular dynamics (AIMD) free energy simulations to investigate the stability and dynamics of dispersed Pd atoms and subnanometer clusters on γ-Al 2 O 3 . We consider nucleation for varying Pd loadings on dry γ-Al 2 O 3 (100), dry γ-Al 2 O 3 (110) and wet γ-Al 2 O 3 (110) and examine temperature, entropy and water coverage effects on the stability and dynamics of Pd clusters. At low Pd loading (1.07 Pd atoms/nm 2 on the (100) and 0.75 Pd/nm 2 on the (110)), association of the Pd atoms is thermodynamically unfavorable on the dry surfaces and almost thermoneutral on the wet (110) owing to water blocking of the AlIII defect sites. In agreement with past studies, the Pd atoms are quite mobile but the diffusion free energy barriers do not increase with the water coverage, as previously suggested, but rather remain similar in magnitude owing to translational entropy at finite temperatures. At these Pd loadings, oxidized Pd(II) atoms on the wet (110) surface are dispersed and immobile. At higher Pd loading (1.12 and 1.5 Pd atoms/nm 2 ) on the (110) surface, Pd 3 and Pd 4 clusters are thermodynamically very stable and form fast. At the 1.12 Pd atoms/nm 2 loading, the formation of the Pd 3 cluster is two orders of magnitude slower when the surface is hydroxylated as the system becomes somewhat trapped before the dinuclear cluster Pd 2 collides with a Pd atom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Unveiling the Role of In Situ Al 2 O 3 Passivation in Molecular-Ink-Processed CuIn(S,Se) 2 Photovoltaics

Here, we report on the optimization of in situ passivation of ink-based CuIn(S,Se) 2 thin-film solar cells via controlled incorporation of Al 2 O 3 in CuIn(S,Se) 2 films by the addition of Al(NO 3 ) 3 to the molecular ink precursor. For this purpose, the Al/(Al + In) (AAI) metal ratio was varied from 0.05 to 0.30. We observe that the efficiency of the cells made of Al 2 O 3 -incorporated CuIn(S,Se) 2 is consistently higher than those without Al 2 O 3 , especially due to an improvement in open-circuit voltage (V OC ) and fill factor (FF), for all tested AAI ratios. With an AAI of 0.05, a maximum efficiency of 11.2% and an average efficiency of 8.5% (measured across 18 cells) was achieved, compared to 8.5% maximum efficiency and 6.5% average efficiency for Al-free CuIn(S,Se) 2 . Furthermore, we find that cells made of Al 2 O 3 -incorporated CuIn(S,Se) 2 with an AAI of 0.2 show a narrow distribution in the photovoltaic performance, indicating higher reproducibility and higher FF. Energy-dispersive X-ray spectroscopy shows that, at AAI = 0.2, Al 2 O 3 is distributed more homogeneously at the surface of the Al 2 O 3 -incorporated CISSe. Capacitance-voltage measurements reveal a reduced defect density by incorporation of Al 2 O 3 , which could be partly responsible for the higher V OC . Furthermore, using detailed surface analysis with various X-ray and electron spectroscopy methods, we derive chemical and electronic structure information from the surface. With ultraviolet photoelectron (UPS) and inverse photoemission spectroscopies (IPES), the electronic band gap of the CuIn(S,Se) 2 thin-film surface is found to increase from 1.22 to 1.88 eV (+-0.12 eV) with Al 2 O 3 incorporation. This is accompanied by a clear reduction of the conduction band spike at the CdS/CISSe interface due to Al 2 O 3 addition, as derived by both UPS and IPES as well as temperature-dependent V OC measurements.

14 SOLAR ENERGY↗
DOE OSTI2020

Probing the Atomic-Scale Structure of Amorphous Aluminum Oxide Grown by Atomic Layer Deposition

Atomic layer deposition (ALD) is a well-established technique for depositing nanoscale coatings with pristine control of film thickness and composition. The trimethylaluminum (TMA) and water (H 2 O) ALD chemistry is inarguably the most widely used and yet to date, we have little information about the atomic-scale structure of the amorphous aluminum oxide (AlO x ) formed by this chemistry. This lack of understanding hinders our ability to establish process-structure-property relationships and ultimately limits technological advancements employing AlOx made via ALD. In this work, we employ synchrotron high-energy X-ray diffraction (HE-XRD) coupled with pair distribution function (PDF) analysis to characterize the atomic structure of amorphous AlO x ALD coatings. We combine ex situ and in operando HE-XRD measurements on ALD AlO x and fit these experimental data using stochastic structural modeling to reveal variations in the Al-O bond length, Al and O coordination environment, and extent of Al vacancies as a function of growth conditions. In particular, the local atomic structure of ALD AlO x is found to change with the substrate and number of ALD cycles. The observed trends are consistent with the formation of bulk Al 2 O 3 surrounded by an O-rich surface layer. We deconvolute these data to reveal atomic-scale structural information for both the bulk and surface phases. Overall, this work demonstrates the usefulness of HE-XRD and PDF analysis in improving our understanding of the structure of amorphous ALD thin films and provides a pathway to evaluate how process changes impact the structure and properties of ALD films.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Crystalline Si Surface Passivation with Nafion for Bulk Defects Detection with Electron Paramagnetic Resonance

Here, in monocrystalline Si (c-Si) solar cells, identification and mitigation of bulk defects are crucial to achieving a high photoconversion efficiency. To spectroscopically detect defects in the c-Si bulk, it is desirable to passivate the surface defects. Passivation of the c-Si surface with dielectrics such as Al 2 O 3 and SiNx requires deposition at elevated temperatures, which can influence defects in the bulk. Herein, we report on the passivation of different Czochralski (Cz) Si wafer surfaces by an organic copolymer, Nafion. We test the efficacy of the surface passivation at temperatures ranging from 6 to 473 K to detect bulk defects using electron paramagnetic resonance (EPR) spectroscopy. By comparing with state-of-the-art passivation layers, including Al 2 O 3 and liquid HF/HCl, we found that at room temperature, Nafion can provide comparable passivation of n-type Cz Si with an implied open-circuit voltage (iV oc ) of 713 mV and a recombination current prefactor J o of 5 fA/cm 2 . For p-type Cz Si, we obtained an iV oc of 682 mV with a J o of 22.4 fA/cm 2 . Scanning electron microscopy and photoluminescence reveal that Nafion can also be used to passivate the surface of c-Si solar cell fragments scribed from a solar cell module by using a laser. Consistent with previous studies, analysis of the EPR spectroscopy data confirms that the H-terminated surface is necessary, and fixed negative charge in Nafion is responsible for the field-effect passivation. While the surface passivation quality was maintained for almost 24 h, which is sufficient for spectroscopic measurements, the passivation degraded over longer durations, which can be attributed to surface SiO x growth. These results show that Nafion is a promising room-temperature surface passivation technique to study bulk defects in c-Si.

14 SOLAR ENERGY↗
DOE OSTI2024

Irreversible Catalyst Deactivation Mechanisms of PdO/γ-Al 2 O 3 Catalysts for Lean Methane Oxidation

PdO/γ-Al 2 O 3 catalysts suffer from gradual and irreversible catalyst deactivation under lean CH 4 oxidation conditions, especially in a wet feed. Here, time-resolved CO chemisorption DRIFTS measurements are conducted systematically on a series of PdO/γ-Al 2 O 3 catalysts to probe the surface reactivity of PdO nanoparticles after various in situ pretreatments. At 80 °C, CO barely adsorbs on fully oxidized PdO surfaces but interacts with coordinatively unsaturated Pd sites, causing gradual reduction of the PdO surfaces. This results in the formation of characteristic IR bands on various metallic Pd 0 sites. By monitoring and comparing the formation kinetics of these IR bands on samples before and after CH 4 oxidation, we theorize that the irreversible catalyst deactivation during CH 4 oxidation is caused by PdO surface reconstruction, in which coordinatively unsaturated Pd sites gradually become fully coordinated by oxygen. Effectively, the surface reconstruction leads to the formation of a passivation layer on the PdO nanoparticles, which hinders their ability in activating CH 4 , and hence the subsequent oxidation reaction. Temperature-programmed reduction with CO as the reductant (CO-TPR) reveals that the passivation layer formed during CH 4 oxidation is significant enough to increase the reduction temperature of PdO nanoparticles of the 3.0% PdO/γ-Al 2 O 3 samples, although such an effect is less obvious for the 0.4% PdO/γ-Al 2 O 3 samples. On the other hand, it is also discovered that the passivation layer is not completely inert. Under certain reaction conditions, with some being relatively mild, such as low-temperature CO oxidation in a net lean atmosphere and in the presence of H 2 O, the passivation layer can undergo structure change which results in regeneration or even activation of CH 4 oxidation activity of an already deactivated catalyst. Additionally, it is discovered that the fully coordinated Pd–O surface is a metastable phase under CH 4 oxidation conditions. In the presence of H 2 O and at ambient temperatures, surfaces with coordinatively unsaturated Pd sites are thermodynamically more favorable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗