Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Activity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Eliminating Imaginary Vibrational Frequencies in Quantum-Chemical Cluster Models of Enzymatic Active Sites

In constructing finite models of enzyme active sites for quantum-chemical calculations, atoms at the periphery of the model must be constrained to stop unphysical rearrangements during geometry relaxation. A simple fixed-atom or “coordinate-lock” approach is commonly employed but leads to undesirable artifacts in the form of small imaginary frequencies. These preclude evaluation of finite-temperature free-energy corrections, limiting thermochemical calculations to enthalpies only. Full-dimensional vibrational frequency calculations are possible by replacing the fixed-atom constraints with harmonic confining potentials. Here, we compare that approach to an alternative strategy in which fixed-atom contributions to the Hessian are simply omitted. While the latter strategy does eliminate imaginary frequencies, it tends to underestimate both the zero-point energy and the vibrational entropy while introducing artificial rigidity. Harmonic confining potentials eliminate imaginary frequencies and provide a flexible means to construct active-site models that can be used in unconstrained geometry relaxations, affording better convergence of reaction energies and barrier heights with respect to the model size, as compared to models with fixed-atom constraints.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing Active-Site Relocation in Cu/SSZ-13 SCR Catalysts during Hydrothermal Aging by in situ EPR Spectroscopy, Kinetic Studies, and DFT Calculations

Cu/SSZ-13 selective catalytic reduction catalysts display activity loss after mild hydrothermal aging without support degradation or loss of isolated Cu ion content. By applying electron paramagnetic resonance spectroscopy to compare hydrated, dehydrated and NH3-saturated catalysts before and after hydrothermal aging, as well as density functional theory calculations, it is found that hydrothermal aging induces Cu relocation, leading to stronger Cu-support interactions. This is particularly evidenced by ZCuOH conversion to Z2Cu, which leads to the generation of a unique structure with two Cu(II) ions positioned in a double 6-membered ring prism. The Cu(II) ions that do not undergo such dramatic changes also appear to stay closer to framework windows as evidenced by the overall increased anisotropy during EPR measurements. In situ EPR measurements under SCR conditions demonstrate that, in comparison to the fresh catalyst, higher percentages of Cu species stay as Cu(II) in the aged catalyst. This suggests that the reduction half-cycle of the SCR redox, i.e., Cu(II) ? Cu(I), becomes slower for the hydrothermally aged catalyst.

42 ENGINEERING↗

Ce x Zr 1– x O 2 -Supported CrO x Catalysts for CO 2 -Assisted Oxidative Dehydrogenation of Propane–Probing the Active Sites and Strategies for Enhanced Stability

CO 2 -assisted oxidative dehydrogenation of propane (CO 2 -ODH) represents an attractive approach for propylene production and CO 2 utilization. As a soft oxidant, CO 2 can minimize overoxidation of the hydrocarbons to enhance the propylene selectivity while increasing the equilibrium yield. However, a major challenge of CO 2 -ODH is the rapid deactivation of the catalysts. The current study focuses on designing Ce x Zr 1–x O 2 -mixed oxide-supported CrO x catalysts for CO 2 -ODH with enhanced product selectivity and catalyst stability. By doping 0–30% Ce in the Ce x Zr 1–x O 2 mixed oxide support, propane conversion of 53–79% was achieved at 600 °C, with propylene selectivity up to 82%. Compared to the pure ZrO 2 -supported catalyst (i.e., 5 wt %Cr/ZrO 2 ), 20–30 %Ce doped catalysts (i.e., 5 wt %Cr/Ce 0.2 Zr 0.8 O 2 and 5 wt %Cr/Ce 0.3 Zr 0.7 O 2 ) inhibited the formation of CH 4 and ethylene and improved propylene selectivity from 57 to 77–82%. Detailed characterizations of the 5%Cr/Ce 0.2 Zr 0.8 O 2 catalyst and density functional theory (DFT) calculations indicated that Cr 3+ is the active species during the CO 2 -ODH reaction, and the reaction follows a non-redox dehydrogenation pathway. Coke formation was determined to be the primary reason for catalyst deactivation, and the addition of Ce to the ZrO 2 support greatly enhanced the coke resistance, leading to superior stability. Furthermore, coke removal by oxidizing the catalyst in air is effective in restoring its activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface-Activated Corrosion in Tin–Lead Halide Perovskite Solar Cells

Mixed tin–lead halide perovskite solar cells have promising power conversion efficiencies, but long-term stability is still a challenge. Here, we examine the stability of a 60:40 tin–lead perovskite to better understand diminished device performance upon thermal treatment, both in ambient and inert atmosphere. Operando X-ray diffraction shows a stable bulk structure of the perovskite absorber, leading to the hypothesis that surface chemistry dominates the degradation mechanism. X-ray photoelectron spectroscopy reveals two new observations post-thermal annealing that accompany previously reported Sn 4+ evolution: (i) the formation of I 3 – intermediates preceding I 2 loss at the surface and (ii) evidence of under-coordinated tin and lead surface sites (Sn δ<2+ and Pb δ<2+ , respectively) in inert and ambient conditions. These two species indicate an activated corrosion (i.e., both oxidation and reduction) process at the surface as a possible chemical pathway for degradation, which is expected to be accelerated under operando voltage and light biases.

14 SOLAR ENERGY↗

Synthesis and Structure–Activity Characterization of a Single-Site MoO 2 Catalytic Center Anchored on Reduced Graphene Oxide

Molecularly derived single-site heterogeneous catalysts can bridge the understanding and performance gaps between conventional homogeneous and heterogeneous catalysis, guiding the rational design of next-generation catalysts. While impressive advances have been made with well-defined oxide supports, the structural complexity of other supports and the nature of the grafted surface species present an intriguing challenge. In this study, single-site Mo(=O) 2 species grafted onto reduced graphene oxide (rGO/MoO 2 ) are characterized by XPS, DRIFTS, powder XRD, N 2 physisorption, NH 3 -TPD, aqueous contact angle, active site poisoning assay, Mo EXAFS, model compound single-crystal XRD, DFT, and catalytic performance. NH 3 -TPD reveals that the anchored MoO 2 moiety is not strongly acidic, while Mo 3d 5/2 XPS assigns the oxidation state as Mo(VI), and XRD shows little rGO periodicity change on MoO 2 grafting. Contact angle analysis shows that MoO 2 grafting consumes rGO surface polar groups, yielding a more hydrophobic surface. The rGO/MoO 2 DRIFTS assigns features at 959 and 927 cm –1 to the symmetric and antisymmetric Mo=O stretching modes, respectively, of an isolated cis-(O=Mo=O) moiety, in agreement with DFT computation. Moreover, the Mo EXAFS rGO/MoO 2 structural data are consistent with isolated (C–O) 2– Mo(=O) 2 species having two Mo=O bonds and two Mo–O bonds at distances of 1.69(3) and 1.90(3) Å, respectively. rGO/MoO 2 is also more active than the previously reported AC/MoO 2 catalyst, with reductive carbonyl coupling TOFs approaching 1.81 × 10 3 h –1 . rGO/MoO 2 is environmentally robust and multiply recyclable with 69 ± 2% of the Mo sites catalytically significant. Altogether, rGO/MoO 2 is a structurally well-defined and versatile single-site Mo(VI) dioxo heterogeneous catalytic system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bayesian force fields from active learning for simulation of inter-dimensional transformation of stanene

Abstract We present a way to dramatically accelerate Gaussian process models for interatomic force fields based on many-body kernels by mapping both forces and uncertainties onto functions of low-dimensional features. This allows for automated active learning of models combining near-quantum accuracy, built-in uncertainty, and constant cost of evaluation that is comparable to classical analytical models, capable of simulating millions of atoms. Using this approach, we perform large-scale molecular dynamics simulations of the stability of the stanene monolayer. We discover an unusual phase transformation mechanism of 2D stanene, where ripples lead to nucleation of bilayer defects, densification into a disordered multilayer structure, followed by formation of bulk liquid at high temperature or nucleation and growth of the 3D bcc crystal at low temperature. The presented method opens possibilities for rapid development of fast accurate uncertainty-aware models for simulating long-time large-scale dynamics of complex materials.

Chemistry↗

Viscous flow properties and hydrodynamic diameter of phenothiazine-based redox-active molecules in different supporting salt environments

We report viscous flow properties of a redox-active organic molecule, N-(2-(2-methoxyethoxy)ethyl)phenothiazine (MEEPT), a candidate for non-aqueous redox flow batteries, and two of its radical cation salts. A microfluidic viscometer enabled the use of small sample volumes in determining viscosity as a function of shear rate and concentration in the non-aqueous solvent, acetonitrile, both with and without supporting salts. All solutions tested show Newtonian behavior over shear rates of up to 30 000 s−1, which was rationalized by scaling arguments for the diffusion-based relaxation time of a single MEEPT molecule without aggregation. Neat MEEPT is flowable but with a large viscosity (412 mPa⋅s at room temperature), which is ∼1000 times larger than that of acetonitrile. MEEPT solutions in acetonitrile have low viscosities; at concentrations up to 0.5 M, the viscosity increases by less than a factor of two. From concentration-dependent viscosity measurements, molecular information was inferred from intrinsic viscosity (hydrodynamic diameter) and the Huggins coefficient (interactions). Model fit credibility was assessed using the Bayesian Information Criterion. It is found that the MEEPT and its charged cations are “flowable” and do not flocculate at concentrations up to 0.5 M. MEEPT has a hydrodynamic diameter of around 8.5 Å, which is almost insensitive to supporting salt and state of charge. This size is comparable to molecular dimensions of single molecules obtained from optimized structures using density functional theory calculations. The results suggest that MEEPT is a promising candidate for redox flow batteries in terms of its viscous flow properties.

Wang, Yilin (ORCID:0000000316102995)↗

Cosmogenic activation of silicon

In the production of 3 H, 7 Be, and 22 Na by interactions of cosmic-ray particles with silicon can produce radioactive backgrounds in detectors used to search for rare events. Through controlled irradiation of silicon CCDs and wafers with a neutron beam that mimics the cosmic-ray neutron spectrum, followed by direct counting, we determined that the production rate from cosmic-ray neutrons at sea level is (112 ± 24) atoms/( kg day ) for 3 H, (8.1 ± 1.9) atoms/( kg day ) for 7 Be, and (43.0 ± 7.2) atoms/( kg day ) for 22 Na . Complementing these results with the current best estimates of activation cross sections for cosmic-ray particles other than neutrons, we obtain a total sea-level cosmic-ray production rate of (124 ± 25) atoms/(kg day) for 3 H, (9.4 ± 2.0) atoms/( kg day ) for 7 Be, and (49.6 ± 7.4) atoms/( kg day ) for 22 Na. These measurements will help constrain background estimates and determine the maximum time that silicon-based detectors can remain unshielded during detector fabrication before cosmogenic backgrounds impact the sensitivity of next-generation rare-event searches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Internal Model-Based Active Damping Strategy for a Back-to-Back Modular Multilevel Converter System for Advanced Grid Support: Preprint

The proposed work focuses on the possibility of achieving the reduction in the size of the interfacing filter for the grid connection for a back-to-back modular multilevel converter system with the use of third order LCL filters. To achieve the same attenuation, it is possible to reduce the size of the interfacing filters by the usage of third order filters. However, this kind of filtering comes with the limitation of having sustained oscillations due to lack of damping especially during transient changes. Therefore, in this work, a methodology has been proposed based on the principle of internal model to cater for this unwanted oscillations. The third order system is modeled inside the microcontroller with the damping enabled. The error between the output from the model and the actual are compared and the error is utilized to accomplish the active damping strategy. The proposed architecture is verified via computer simulations based on MATLAB/Simulink domain and various case study results along with their discussion is presented in this paper.

dq control↗

Role of the ionic environment in enhancing the activity of reacting molecules in zeolite pores

Tailoring the molecular environment around catalytically active site allows the enhancement of catalytic reactivity via a hitherto unexplored pathway. In zeolites, the presence of water creates an ionic environment via the formation of hydrated hydronium ions and the negatively charged framework Al tetrahedra. The high density of cation-anion pairs determined by the aluminum concentration of a zeolite induces a high local ionic strength that increases the excess chemical potential of sorbed and uncharged organic reactants. Charged transition states (as for example, the carbenium ions in the discussed alcohol dehydration) are stabilized, reducing the energy barrier and leading to a higher reaction rate. Using the intramolecular dehydration of cyclohexanol on H-MFI in water, we show quantitatively the enhancement of the reaction rate by the presence of high ionic strength as well as potential limitations of this strategy. The approach opens a new pathway to systematically enhance catalytic reactivity rates and has wide-ranging implications for understanding catalysis in condensed phase.

Pfriem, Niklas↗

Nanopore Activity Assays for Detection of Biomarker Protease Activity: Design and Testing of Substrates for Both Nanopore Sequencing and PCR-Based Detection Methods

The work performed in this project has demonstrated the ability to construct proteolytic enzyme substrates that are PCR and sequencing-readable reporter molecules. Specifically, the goal was to detect those reporter molecules via PCR and Oxford Nanopore Technologies MinION sequencing methods following exposure to the biomarker protease thrombin. The assay development focused on binding the constructed peptide-oligonucleotide chimera to immobilized streptavidin. The action of thrombin on the peptide portion of the molecule released the oligonucleotide for detection. Detection of protease activity was demonstrated in a concentration-dependent manner using MALDI-MS, RT-PCR and DNA sequencing. Additional steps to remove background release of reporter molecules during the assay was used to improve the difference in detected oligonucleotide reporter following protease activity. Additional steps in assay development will be to (1) test the assay in an appropriate matrix, (2) investigate detection using additional DNA sequencing platforms and (3) demonstrate multiplexed detection of multiple protease markers in a single reaction.

59 BASIC BIOLOGICAL SCIENCES↗

Health-care district management information system plan: Review of operations analysis activities during calendar year 1975 and plan for continued research and analysis activities

Operations research activities developed to identify the information required to manage both the efficiency and effectiveness of the Veterans Administration (VA) health services as these services relate to individual patient care are reported. The clinical concerns and management functions that determine this information requirement are discussed conceptually. Investigations of existing VA data for useful management information are recorded, and a diagnostic index is provided. The age-specific characteristics of diseases and lengths of stay are explored, and recommendations for future analysis activities are articulated. The effect of the introduction of new technology to health care is also discussed.

Nielson, G. J.↗

Dynamics of erythrocyte count, hemoglobin, and catalase activity in rat blood in hypokinesia, muscular activity and restoration

Tests were conducted to prove that muscular exertion (in this instance swimming) of different duration and intensity, as well as hypodynamia, result in an increase of hemoglobin and number of red blood cells in peripheral blood rats. Catalase activity increased with an increase in the duration of swimming, but only up to 6 hr; with 7-9 hr of swimming as well as in hypodynamia, catalase activity decreased. It was also observed that under hypodynamia as well as in 3, 5 and 6 hr exertion (swimming) the color index of blood decreased. Pressure chamber treatment (for 8 min each day for one week), alternating a 2 min negative pressure up to 35 mm Hg with 1 min positive pressure, increased the erythrocyte count and hemoglobin content.

Taneyeva, G. V.↗