Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AMINES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Data‐Driven Analysis of Amine‐Based Sorbents for CO 2 Removal from the Atmosphere

Available data on amine-based sorbents used for the direct air capture (DAC) process were gathered and analyzed to identify the correlations between various aspects of these sorbents and the operating conditions they are used in. It is demonstrated that a moderately high temperature (∼ 50 °C) can help with higher CO 2 capture capacity. Furthermore, the effect of sorbent preparation method on its activity and stability was studied. Also, the influence of amine groups and support choice on amine efficiency and CO 2 capture capacity was discussed. The DAC process conditions proved to play a major role in determining the optimal sorbent. An outlook for characteristics to be sought for in future DAC sorbents for CO 2 removal is proposed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

The Role of Hydroxyl Group Acidity on the Activity of Silica-Supported Secondary Amines for the Self-Condensation of n -Butanal

The catalytic activity of secondary amines supported on meso-porous silica for the self-condensation of n -butanal to 2-ethylhexenal can be altered significantly by controlling the Brønsted acidity of M - OH species present on the surface of the support. In this study, M - OH (M = Sn, Zr, Ti, and Al) groups were doped onto the surface of SBA-15, a mesoporous silica, prior to grafting secondary propyl amine groups on to the support surface. The catalytic activity was found to depend critically on the synthesis procedure, the nature and amount of metal species in-troduced and the spatial separation between the acidic sites and amine groups. DFT analysis of the reaction pathway indicates that, for weak Brønsted acid groups, such as Si - OH, the rate-limiting step is C - C bond formation, whereas for stronger Brønsted acid groups, such as Ti and Al, hydrolysis of iminium species produced upon C - C bond formation is the rate-limiting step. Finally, theoretical analysis shows further that the apparent activation energy decreases with increasing Brønsted acidity of the M - OH groups, consistent with experimental observation.

aldol reaction↗
DOE OSTI2019

Aerobic oxidative coupling of amines to imines by mesoporous copper aluminum mixed metal oxides via generation of Reactive Oxygen Species (ROS)

We report a mesoporous, monomodal copper aluminum mixed metal oxide (MMO) (average pore size 9.63 nm, surface area 140 m 2 /g) synthesized via a modified inverse micelle method, efficiently catalyzes aerobic oxidative coupling of amines to imines. This material exhibits excellent conversion (> 99%) and selectivity (> 99%) towards imine synthesis under mild, solvent free, green conditions utilizing atmospheric air as the sole oxidant. Catalytic activity is observed for a diverse range of amine substrates. The aerobic oxidation of amines to imines follows a unique mechanistic pathway which involves Reactive Oxygen Species (ROS).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effect of amine type on acidic toxic gas adsorption at ambient conditions on modified CuBTC

We report two amine-modified copper-based Metal Organic Frameworks (MOF (CuBTC)) of different surface chemical and textural features were synthesized and used as adsorbents of acidic toxic gases (NO 2 and H 2 S) in both moist (71% relative humidity (R.H.)) and dry conditions. The initial and exhausted samples were characterized by nitrogen adsorption, powder X-ray diffraction, scanning electron microscopy, thermal gravimetric analysis and Fourier transform infrared spectroscopy. The addition of melamine prevented full growth of CuBTC crystals and resulted in amorphous-like particles with sizes less than 200 nm. The material was non-porous with a small surface area. When urea was used as an amine source, the resulting particles maintained the overall octahedral shape of the parent CuBTC MOF and the material was more porous than the parent MOF. While the urea-modified CuBTC sample performed well as an NO 2 adsorbent in the presence of moisture, the reactivity of the melamine-modified sample and its physical properties provided a favorable environment for the removal of H 2 S. The incorporation of amines into the MOF structure also resulted in surface defects /open copper sites that favored the removal of toxic gases in dry conditions. The reactivity of the adsorbents with toxic gases was demonstrated by the changes in the adsorbent colors, in texture, and in surface chemistry (organic salts, complexes, sulfides and nitrates were formed).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Synthesis, characterization, and properties of the first indium borogermanate incorporating an organic amine ligand: InBGe{sub 2}O{sub 6}(OH){sub 2}(CH{sub 3}CH(NH{sub 2})CH{sub 2}NH{sub 2})·2H{sub 2}O

A new indium borogermanate incorporating an organic amine ligand, InBGe{sub 2}O{sub 6}(OH){sub 2}(CH{sub 3}CH(NH{sub 2})CH{sub 2}NH{sub 2})·2H{sub 2}O, was synthesized under solvothermal conditions and characterized by infrared spectroscopy, thermogravimetric analysis, and emission spectroscopy. This compound is a new example of the combination of metal, boron, and germanium atoms into one structure in the presence of organic amine molecules. Its 2D sheets with one 3-, one 4-, and two types of 6-membered rings consist of In{sub 2}O{sub 6}N{sub 4} octahedral dimers, Ge{sub 2}O{sub 6}(OH) double tetrahedra, and BO{sub 3}(OH) groups that are interconnected by water molecules to form a 3D supramolecular framework. Interestingly, the emission spectrum for this compound displays a strong broad band centered at 455 nm. - Graphical abstract: The first example of indium borogermanate incorporating an organic amine ligand was synthesized under solvothermal conditions. Infrared spectroscopy, thermogravimetric analysis, and emission spectroscopy have also been studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Preparation of amine-impregnated silica foams using agar as the gelling agent

In this work we successfully prepared amine-impregnated gel-cast silica foams using agar and atmospheric air as the gelling agent and heat treatment atmosphere, respectively. The concentration of 3,6-anhydrogalactose in agar was evaluated by ultraviolet–visible spectroscopy (UV–Vis). The obtained foams were examined by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG) coupled to mass spectrometry (TG-MS), scanning electron microscopy (SEM), X-ray microtomography (micro-CT), and Archimedes method. The cold crushing strength of the materials prepared in this work was assessed using a mechanical testing stage available in the micro-CT system. The obtained foams exhibited a highly interconnected pore network, with an expressive presence of open pores. Samples heat-treated at 1300 °C for 2 h showed both an expressive porosity (≈ 77%) and a significant cold crushing strength (≈ 1.4 MPa). It was observed that the calcination of the prepared materials at 1200 °C for times as long as 16 h may lead to the rupture of pore walls. FTIR and TG-MS revealed that amine groups were properly incorporated into the foams structure. - Highlights: •Successful preparation of amine-impregnated gel-cast silica foams •Agar used as the gelling agent •Samples with expressive porosity and cold crushing strength •Sintering times as long as 16 h led to the rupture of the pore network.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A new measurement of amine steric hindrance – N exposure

Here, a new measurement of steric hindrance effect of amines, N exposure, is proposed. N exposure outperforms traditional parameters as it is independent of group-specific parame-ters and accounts for the spatial arrangements of pendant groups. Such a measurement can facilitate the screening of sterically hindered amines for carbon capture with improved CO 2 loading capacities. Along with this study, a script is provided to quantify the N exposure for other amine molecules of interest.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Isomer-sensitive deboronation in reductive aminations of aryl boronic acids

Deboronation is observed during the reductive amination of formylphenylboronic acid (FPBA) to the amine termini and side chains of peptides. This deboronation is sensitive to the isomerism of the boronic acid (BA), with ortho -FPBA yielding complete deboronation in the preparation of an N-terminally-modified dipeptide. The observed behavior is also clearly mediated by the chemical identity of the amine substrate. These results reveal a previously undocumented subtlety of BA functionalization and highlight the importance of thorough spectroscopic characterization in the preparation of peptide and small molecule BAs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

A Six-Membered Concerted Mechanism for CO 2 Capture by Amines Studied under Charged Microdroplet Reaction Conditions

Carbon dioxide (CO 2 ) capture and storage represents an important technological challenge. A mechanistic understanding of interactions involved in the capture process is necessary not only for technological development but also for efficient conversion of captured CO 2 into value-added materials. Herein, we present a novel contained secondary electrospray ionization platform for studying the interactions of gaseous amines and CO 2 gas under microdroplet reaction conditions, which enables mass spectrometry (MS) characterization of CO 2 capture products and intermediates in real time. We detected [2 M + CO 2 + H] + species, which corresponds to a six-membered intermediate. DFT calculations confirmed the high stability of the protonated six-membered ring intermediate. This finding provides a plausible concerted mechanism in the microdroplet environment that excludes the involvement of thermodynamically disfavored ionic species. The carbamic acid counterpart of the final product/salt was readily characterized by tandem MS. The carbamic acid/amine salt was also isolated and characterized by Fourier transform infrared spectroscopy. By virtue of the fact that headspace vapors of amines are sampled, we were able to establish a high-throughput platform that enabled the CO 2 capture capacity of five different amines to be studied in under 2 min. The same device also enabled the absolute quantification of capture capacity.

Amines↗
DOE OSTI2026

Influence of Transition Metal Ion Contaminants on the Performance of Amine-Based Solid Sorbents in Direct Air Capture

Amine-functionalized solid sorbents are a class of sorbent materials proposed for direct air capture (DAC) of CO 2 , yet their long-term performance is susceptible to degradation under realistic operating conditions. Many amines are not thermodynamically stable in air, and amine sorbents oxidize while in use during DAC temperature swing adsorption processes. In this study, we investigate the role of transition metal ion contaminants, specifically Cu 2+ , Fe 2+ , and Ni 2+ , on the oxidative degradation of poly(ethylenimine) (PEI)-impregnated SBA-15 sorbents. By introducing metal ions via different modes mimicking both synthesis-related impurities and impurities derived from environmental exposure, we systematically evaluate sorbent stability after exposure to dry air at an elevated temperature. Thermogravimetric CO 2 uptake measurements reveal that even trace levels of Cu and Fe (as low as ∼4 ppm) can lead to measurable sorbent deactivation after oxidative aging, despite negligible loss in the performance of the control samples. In situ infrared, UV–vis, and X-ray photoelectron spectroscopies indicate that these metals catalyze radical-driven oxidation pathways, altering the chemical structure of the sorbent and accelerating degradation. Our findings underscore the need to account for trace metal contamination during DAC sorbent synthesis and deployment and highlight the importance of environmental contamination pathways.

CO2 capture↗
DOE OSTI2020

CO 2 Capture Using Electrochemically Mediated Amine Regeneration

We describe the current status of our research on, and the development of, the Electrochemically Mediated Amine Regeneration (EMAR) process for the capture of CO2 from flue gases. The absorption step in the EMAR process is the same as in the widely used amine process, but the desorption step is accomplished electrochemically as opposed to by a thermal swing used in the amine process. Our laboratory unit has operated continuously for over 200 h, spanning 130 absorption/desorption cycles. We have established an understanding of the thermodynamics of the EMAR process and provided engineering estimates of key features (energetics and sizing) of this technology. The EMAR system does not rely on steam integration, making it a truly plug-and-play unit that can be easily deployed for a range of applications. The EMAR system can also be scaled-down for distributed, modular, and small-scale operations (e.g., stainless steel mini-mills, etc.). Here, results to date indicate that the EMAR process has the potential to be a viable option for post-combustion CO2 capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Inducing Ferrimagnetic Exchange in 1D-FeSe 2 Chains Using Heteroleptic Amine Complexes: [Fe(en)(tren)][FeSe 2 ] 2

[Fe(en)(tren)][FeSe 2 ] 2 (en = ethylenediamine, C 2 H 8 N 2 , tren = tris(2-aminoethyl)amine, C 6 H 18 N 4 ) has been synthesized by a mixed-ligand solvothermal method. Its crystal structure contains heteroleptic [Fe(en)(tren)] 2+ complexes with distorted octahedral coordination, incorporated between 1D-FeSe 2 chains composed of edge–sharing FeSe 4 tetrahedra. The twisted octahedral coordination environment of the Fe–amine complex leads to partial dimerization of Fe–Fe distances in the FeSe 2 chains so that the FeSe 4 polyhedra deviate strongly from the regular tetrahedral geometry. 57 Fe Mössbauer spectroscopy reveals oxidation states of +3 for the Fe chain atoms and +2 for the Fe complex atoms. The close proximity of Fe atoms in the chains promotes ferromagnetic nearest neighbor interactions, as indicated by a positive Weiss constant, θ = +53.8(6) K, derived from the Curie–Weiss fitting. Magnetometry and heat capacity reveal two consecutive magnetic transitions below 10 K. DFT calculations suggest that the ordering observed at 4 K is due to antiferromagnetic intrachain interactions in the 1D-FeSe 2 chains. The combination of two different ligands creates an asymmetric coordination environment that induces changes in the structure of the Fe–Se fragments. Finally, this synthetic strategy opens new ways to explore the effects of ligand field strength on the structure of both Fe-amine complexes and surrounding Fe–Se chains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Role of High-Spin Species and Pendant Amines in Electrocatalytic Alcohol Oxidation by a Nickel Phosphine Complex

We report the development of active and efficient electrocatalysts for oxidation of alcohols using earth-abundant metals will aid the progress towards a renewable energy economy. Here we present a detailed mechanistic study of electrocatalytic benzyl alcohol oxidation by a molecular nickel complex containing pendant amines using a combination of kinetic studies, NMR spectroscopy, and density functional theory. The catalyst preferentially binds alcohol in high-spin octahedral geometry, but this complex is not readily deprotonated by exogeneous base and inhibits catalysis. Dissociation of one or more solvent ligands returns the complex to a low-spin state that can be deprotonated. Kinetic modeling indicates the off-cycle high-spin intermediate lowers the catalytic turnover frequency by a factor of eight, suggesting that substantial gains in activity can be attained by improvements to the catalyst coordination geometry. In a second finding, we demonstrate the pendant amine of the catalyst only functions as a proton relay for the potential-determining step, oxidation of a nickel hydride intermediate, but does not have a substantial impact on the overall rate for oxidation of benzyl alcohol to benzaldehyde. This result contradicts the common expectation for pendant amines to participate in rate-limiting proton transfer reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Mechanistic Insights toward Accelerated Selenium-Catalyzed Allylic and Propargylic C–H Amination

Catalytic allylic and propargylic C–H aminations present valuable opportunities for the late-stage modification of pharmacophores in drug discovery. However, modern methodology is limited by reliance on expensive transition metal catalysts or slow reactivity. While selenium-catalyzed methods avoid some of these issues, in their current state, they require high catalyst loadings (15 mol %), superstoichiometric quantities of the amine and oxidant source, and long reaction times. Furthermore, our understanding of the mechanism remains incomplete: e.g., what is the catalytically active species, how is the precatalyst converted to it, and what is the role of the ligand? Here, in this paper, we report an N-heterocyclic carbene selenide (NHC-Se) that allows for substantially reduced loadings of selenium without sacrificing reaction time, improves conversions and yields for challenging substrates, and even exhibits the capacity to catalyze 1,4-allylic diamination of alkenes. To understand the origin of the enhanced activity compared to the state-of-the-art NHC-Se precatalyst, we conducted a mechanistic study that supports ligand-free selenium diimide as the active enophile in these systems, while the NHC-derived byproducts, like the corresponding urea, facilitate turnover. We also isolate and structurally characterize NHC-Se mono- and diimido species and explore their mechanistic role. Thus, this work advances C–H amination methodology, our understanding of its mechanistic underpinnings, and selenium chemistry at large.

allylic amination↗
DOE OSTI2021

Organoammonium-Ion-based Perovskites Can Degrade to Pb 0 via Amine–Pb(II) Coordination

The degradation of alkylammonium Pb II halide perovskites, in the dark and upon irradiation near room temperature, involves coordinated amine as the dominant reducing agent to yield Pb o near room temperature, as determined by X-ray photoelectron spectroscopy (XPS). The reduction of Pb II first involves amine coordination, supported by 207 Pb nuclear magnetic resonance (NMR) analysis. It is shown that a Pb II –amide complex is the immediate precursor of Pb II reduction. Its oxidized counterpart, the imine, is formed and is characterized by NMR and gas chromatography–mass spectrometry. Here, the “redox” process requires a β-C–H bond of the alkylamine. Amine species devoid of this moiety do not similarly reduce Pb II to Pb o . The conversion of an alkylammonium moiety to the Pb II –amide is proposed to occur through a sequence of photoassisted proton-transfer reactions to a lead-coordinated ligand, which is substantiated through XPS-observed Pb II reduction in a family of lead bromide/iodide 2D perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Photoenzymatic Asymmetric Hydroamination for Chiral Alkyl Amine Synthesis

Chiral alkyl amines are common structural motifs in pharmaceuticals, natural products, synthetic intermediates, and bioactive molecules. An attractive method to prepare these molecules is the asymmetric radical hydroamination; however, this approach has not been explored with dialkyl amine-derive nitrogen-centered radicals since designing a catalytic system to generate the aminium radical cation, to suppress deleterious side reactions such as α-deprotonation and H atom abstraction, and to facilitate enantioselective hydrogen atom transfer is a formidable task. Herein, we describe the application of photoenzymatic catalysis to generate and harness the aminium radical cation for asymmetric intermolecular hydroamination. In this reaction, the flavin-dependent ene-reductase photocatalytically generates the aminium radical cation from the corresponding hydroxylamine and catalyzes the asymmetric intermolecular hydroamination to furnish the enantioenriched tertiary amine, whereby enantioinduction occurs through enzyme-mediated hydrogen atom transfer. Furthermore, this work highlights the use of photoenzymatic catalysis to generate and control highly reactive radical intermediates for asymmetric synthesis, addressing a long-standing challenge in chemical synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Mechanistic Studies of Activated Hydrogen Release from Amine-Boranes (Final Report)

Effective storage of hydrogen presents one of the most significant technical gaps to successful implementation of the hydrogen economy, particularly for transportation applications. Amine boranes, such as ammonia borane H 3 NBH 3 and ammonia triborane H 3 NB 3 H 7 , have been identified as promising, high-capacity chemical hydrogen storage media containing potentially readily released protic (N-H) and hydridic (B-H) hydrogens. At the outset of our studies, dehydrogenation of ammonia borane had been studied primarily in the solid state, but our DOE sponsored work clearly demonstrated that ionic liquids, base-initiators and/or metal-catalysts can each significantly increase both the rate and extent of hydrogen release from amine boranes under moderate conditions. Our studies also showed that depending upon the activation method, hydrogen release from amine boranes can occur by very different mechanistic steps and yield different types of spent-fuel materials. The fundamental understanding that was developed during this grant of the pathways and controlling factors for each of these hydrogen-release mechanisms is now enabling continuing discovery and optimization of new chemical-hydride based hydrogen storage systems.

08 HYDROGEN↗
DOE OSTI2016

Pelletization of Immobilized Amine Carbon Dioxide Sorbents with Fly Ash and Poly(vinyl chloride)

Abstract A combination of coal fly ash (FA) and a polymer binder, namely, poly(vinyl chloride) (PVC), was used to pelletize immobilized amine CO 2 sorbents. The pelletization of mixtures of FA and 50 wt % tetraethylenepentamine (TEPA) or ethylenimine oligomer mixture ( M w =423)/silica (EI 423 ‐S) with PVC created a rigid PVC/FA/sorbent network. The strength of the network was attributed, in part, to the hydrogen bonding of PVC with the hydroxy and amine groups of the FA and sorbent (infrared spectroscopy). Increasing the PVC molecular weight or FA content enhanced the pellet strength and reduced CO 2 capture. The optimum pellet, FA/EI 423 ‐S (20/80)_PVC 62 [10 wt % PVC 62 ( M w =62 000), 17 wt % FA], captured 1.33 mmol g −1 and exhibited a crush strength of 1.42 MPa. The reaction between PVC and amines produced ammonium ions (−NH 3 + /−NH 2 + ), which reduced the CO 2 captured by the pellet during stability testing. This issue was partially resolved by replacing PVC 62 with p ‐phenylenediamine‐modified PVC 62 , which also enhanced the pellet CO 2 capture to 1.5 mmol g −1 .

Wilfong, Walter Christopher↗