Bi-Assisted Double-Sided ZnO Nanorod Architectures for Fast and Geometry-Enhanced X-Ray Scintillation

Kurudirek, Sinem [Georgia Institute of Technology]; Erickson, Anna [Georgia Institute of Technology]; Sellin, Paul [University of Surrey]; Lawrie, Benjamin [ORNL] (ORCID:000000031431066X); Balandin, Tanya [Georgia Institute of Technology]; Stand, Luis [University of Tennessee, Knoxville (UTK)]; Melcher, Charles L [University of Tennessee, Knoxville (UTK)]; Azoulay, Jason D [Georgia Institute of Technology]; Hertel, Nolan [Georgia Institute of Technology, Atlanta]; Kurudirek, Murat [Georgia Institute of Technology]

doi:10.1021/acsaom.6c00409

DOE OSTI · 3740103

Bi-Assisted Double-Sided ZnO Nanorod Architectures for Fast and Geometry-Enhanced X-Ray Scintillation

Kurudirek, Sinem [Georgia Institute of Technology]·Erickson, Anna [Georgia Institute of Technology]·Sellin, Paul [University of Surrey]·Lawrie, Benjamin [ORNL] (ORCID:000000031431066X)·Balandin, Tanya [Georgia Institute of Technology]·Stand, Luis [University of Tennessee, Knoxville (UTK)]·Melcher, Charles L [University of Tennessee, Knoxville (UTK)]·Azoulay, Jason D [Georgia Institute of Technology]·Hertel, Nolan [Georgia Institute of Technology, Atlanta]·Kurudirek, Murat [Georgia Institute of Technology]

View original source ↗Read source document ↗Export metadata ↓

Abstract

The source did not provide an abstract. Follow the original record for more information.

Keep this discovery

BibTeX RIS

Kurudirek, Sinem [Georgia Institute of Technology], Erickson, Anna [Georgia Institute of Technology], Sellin, Paul [University of Surrey], Lawrie, Benjamin [ORNL] (ORCID:000000031431066X), Balandin, Tanya [Georgia Institute of Technology], Stand, Luis [University of Tennessee, Knoxville (UTK)], Melcher, Charles L [University of Tennessee, Knoxville (UTK)], Azoulay, Jason D [Georgia Institute of Technology], Hertel, Nolan [Georgia Institute of Technology, Atlanta], Kurudirek, Murat [Georgia Institute of Technology]. 2026-08-01. Bi-Assisted Double-Sided ZnO Nanorod Architectures for Fast and Geometry-Enhanced X-Ray Scintillation. https://doi.org/10.1021/acsaom.6c00409

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

DOE OSTI2026

In-Situ Visualization of a Growing Brittle Crack in Aluminum Oxynitride Using Synchrotron X-Rays and the Double-Cleavage Drilled Compression Geometry

Brittle fracture is difficult to study in situ due to the speed of a growing crack and the often-catastrophic nature of failure in brittle materials. As a result, the influence of microstructural considerations, such as orientation, grain boundary locations, and strain field, on the crack path remains poorly understood. Presented in this study is a method addressing this knowledge gap, which utilizes the double-cleavage drilled compression geometry to achieve quasi-stable fracture in aluminum oxynitride (AlON). Synchrotron X-ray micro-computed tomography is used to characterize the crack shape and length, while high-energy diffraction microscopy provides information on the strains, orientations, and shapes of grains in the microstructure surrounding the crack tip. During testing, the crack grew in discrete and irregular jumps while the fracture toughness falls within reported ranges. The crack in AlON is found to have no greater tendency to crack intergranularly as compared to transgranularly, and grains which are cracked transgranularly do not display a trend in orientation or stress when compared to those around which the crack followed a grain boundary. The high resolution of the crack path and microstructural data provides a path forward for modeling and understanding 3D brittle fracture.

Gorske, Sara F.↗

DOE OSTI2026

Boron-Based Neutron Scintillator Screen Characterization with X-Rays and Neutrons

Recent work on boron-based neutron scintillator screens suggests these screens can offer superior performance when compared to commonly used screens. Borated neutron scintillator screens perform well in terms of light output (5-6 times greater than a standard Gadox screen) and detection effi-ciency (larger than standard LiF+ZnS screens). However, previously manu-factured boron-based screens have exhibited non-uniform surface coating and a poor mixture between phosphor and converter particles. The objective of this work was to evaluate newly fabricated scintillator screens to deter-mine if enhanced fabrication methods produced a more homogeneous distribution between neutron converter and scintillation phosphor particles. Uniformity of scintillator material deposition was also inspected. This new iteration of screens appeared more uniform than previous generations with the new coating method improving surface chemistry and scintillator material homogeneity. Additionally, a new methodology for screen characterization, involving the correlation of a neutron image taken with a borated scintillator screen to X-ray computed tomography of that same screen, was demonstrated to elucidate a relationship between scintillator screen thickness and relative light output of the screen under neutron exposure. This method suggested that the ideal thickness of scintillator material was ~150 µm to maximize light output of the screen.

36 - MATERIALS SCIENCE↗

DOE OSTI2026

Demonstration of gold nanorod systems for enhanced total efficiency: Experimental and numerical analysis

This study investigates the photothermal performance of gold nanorods engineered to exhibit longitudinal plasmon resonances at 695 nm, 780 nm, and 970 nm. The work combines synthesis, structural characterization, extinction measurements, numerical modeling, and controlled temperature experiments to quantify how nanorod geometry, resonance tuning, concentration, and chamber shape jointly influence heat generation. Transmission electron microscopy confirms that increasing nanorod aspect ratio systematically shifts the longitudinal plasmon peak toward the near-infrared region. Extinction measurements show strong agreement with theoretical predictions, validating the numerical model across two independent datasets. Three chamber geometries were tested under laser excitation at 640 nm, 808 nm, and 980 nm: an ascending stepped base, a flat base, and a descending stepped base. Without nanorods, the ascending geometry produced the highest efficiency due to enhanced natural convection. After introducing gold nanorods, all geometries exhibited substantial thermal enhancement, with total efficiencies exceeding 20%. The strongest improvement was obtained for nanorods resonant at 780 nm with a mass concentration of 4.6 mg/mL implemented on the descending stepped-base geometry. This performance resulted from the combined effect of spectral overlapping with the 808 nm laser, the highest nanorod concentration, and localized heat accumulation that intensified buoyancy-driven flow. The findings demonstrate that total efficiency is governed by a synergistic interplay between optical resonance, nanoparticle concentration, and macroscopic chamber design, revealing the system-level coupling between nanoscale plasmonic absorption and macroscale heat-transfer phenomena. The results provide a validated framework for tuning nanoscale plasmonic absorbers and optimizing thermal systems for applications requiring efficient light-to-heat conversion.

77 NANOSCIENCE AND NANOTECHNOLOGY↗