Near Repository Investigations for Disposal of Hot SNF in an Argillite Repository

Basurto, Eduardo [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)] (ORCID:0000000300991329); LaForce, Tara Catherine [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)] (ORCID:0009000522079279); Swiler, Laura Painton [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)] (ORCID:0000000163852241); Brooks, Dusty Marie [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)] (ORCID:0000000287098738); Leone, Rosemary Claire [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)] (ORCID:0009000760899758); Mariner, Paul Edwin [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)] (ORCID:0009000289228265); Portone, Teresa [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)] (ORCID:0000000263800852)

doi:10.2172/3683716

DOE OSTI · 3683716

Near Repository Investigations for Disposal of Hot SNF in an Argillite Repository

Basurto, Eduardo [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)] (ORCID:0000000300991329)·LaForce, Tara Catherine [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)] (ORCID:0009000522079279)·Swiler, Laura Painton [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)] (ORCID:0000000163852241)·Brooks, Dusty Marie [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)] (ORCID:0000000287098738)·Leone, Rosemary Claire [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)] (ORCID:0009000760899758)·Mariner, Paul Edwin [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)] (ORCID:0009000289228265)·Portone, Teresa [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)] (ORCID:0000000263800852)

View original source ↗Read source document ↗Export metadata ↓

Abstract

This is the level 4 milestone report (M4) for the work package SF-25SN01030409 in the Geologic Disposal Safety Assessment (GDSA) program.

Keep this discovery

BibTeX RIS

Basurto, Eduardo [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)] (ORCID:0000000300991329), LaForce, Tara Catherine [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)] (ORCID:0009000522079279), Swiler, Laura Painton [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)] (ORCID:0000000163852241), Brooks, Dusty Marie [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)] (ORCID:0000000287098738), Leone, Rosemary Claire [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)] (ORCID:0009000760899758), Mariner, Paul Edwin [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)] (ORCID:0009000289228265), Portone, Teresa [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)] (ORCID:0000000263800852). 2025-09-01. Near Repository Investigations for Disposal of Hot SNF in an Argillite Repository. https://doi.org/10.2172/3683716

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

DOE OSTI2026

Semi-Dynamic Leach Testing of Densified Silicon-based Iodine Waste Forms

Iodine waste forms (IWF) require a conceptual corrosion release model (CCRM) to provide iodine (I) release rates for performance modeling nuclear waste disposal repositories. To develop a CCRM, an understanding of the corrosion mechanisms of the IWF are required along with data from consistent test methods to parameterize the model. The present study has advanced both areas by providing and assessing the corrosion resistance of IWF types based on their processing history in minor variations of semi-dynamic leach tests. The test included a series of semi-dynamic leach tests using monolithic IWFs in deionized water (leachant). Several experiments were conducted under alternate test conditions with changes to temperature, leachant replacement, leachant pH, leachant volume, masking, and surface finish to elucidate if varying these conditions impacted IWF corrosion behavior. Tests were conducted on two classes of IWFs: (1) I-bearing silver-mordenite (AgZ) materials processed by hot isostatic pressing (HIP) at different temperatures, pressures, sizes, and times; and (2) I-bearing silver-functionalized silica aerogels (SFA) processed by either HIP or spark plasma sintering (SPS). The corrosion susceptibility of AgZ samples was influenced by HIP temperature and pressure. The SPS SFAs retained I far better than HIP SFAs. Additional findings in this study include: (1) The iodine dissolution rate decreased with decreasing temperature, (2) a common ion effect may occur and slow dissolution of the host phase if the leachant is not regularly replaced, (3) pH controls the dissolution rate, and (4) the iodine dissolution rate slows with extended test time (up to 224 days). Based on this work, these parameters should thus be represented when developing a CCRM.

corrosion↗

DOE OSTI2026

Dust Survival in Galactic Winds

This repository contains three-dimensional volumetric data from an Eulerian hydrodynamical simulation (conducted on a uniform Cartesian grid) generated by the Cholla hydrodynamics code. The datasets contain snapshots (full-grid, projections, and slices) in the HDF5 format of a multi-phase medium in which a hot, diffuse, dust-free background wind accelerates a cool, dense cloud of gas and dust. This scenario is intended to represent a supernova-driven galactic outflow, in which hot supernova winds are thought to accelerate cool interstellar medium material out of the galactic disk into the surrounding circumgalactic medium. There are three separate datasets for simulations corresponding to three cloud evolutionary scenarios: long-term cloud survival (surv), marginal cloud survival (disr), and cloud destruction (dest). Projection and slice images of the simulations are also included in this repository.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Insights into the thermo-hydraulic properties of compacted MX80 bentonite during hydration under elevated temperature

In high-level radioactive waste geological repositories, compacted bentonite undergoes coupled thermo-hydraulic processes due to heat released from a central waste canister and groundwater imbibition from the surrounding host rock. An understanding of these processes is essential for long-term simulations of radionuclide migration and canister corrosion, which requires an understanding of temperature effects on the coupled thermo-hydraulic properties governing these processes. In this study, a tank-scale radial infiltration test was used to investigate water imbibition processes in compacted bentonite under a central heater temperature of 200 °C that simulates high thermal gradients in a repository. Interpretation of this test focuses on evaluation of the liquid water wetting front during hydration and the interpretation of the temperature-dependent transient soil water retention curve (SWRC), thermal conductivity function (TCF), and hydraulic conductivity function (HCF). The SWRC during imbibition follows a temperature-dependent wetting path. Temperature effects on the hydraulic conductivity of bentonite in saturated conditions had the greatest effect on the shape of the HCF, with minimal temperature effects at higher suctions. The transient thermal conductivity data matched well with a new TCF linked with the SWRC shape. Although the bentonite layer was restrained, local deformations during hydration may have affected the shapes of the TCF and HCF.

Engineering↗