MRV Challenge 3: velocity and passive scalar comparison in a 3D turbulent flow

Benson, Mike [ORNL] (ORCID:000000023210116X); Nguyen, Thien D. [ORNL] (ORCID:0000000159722006); Romig, Swantje [University of Rostock]; Dagobert, Louis [Binghamton University (SUNY)]; Borup, Daniel [Borup Solutions, LLC]; Bruschewski, Martin [University of Rostock]; John, Kristine [University of Rostock]; Grundmann, Sven [University of Rostock]; Song, Simon [Hanyang University, Korea]; Dong, Hangfei [Hanyang University, Korea]; Banko, Andrew [U.S. Military Academy]; Elkins, Christopher [Elkins Engineering, LLC]; Villafane, Laura [University of Illinois Urbana Champaign]; Bandopadhyay, Tuhin [University of Illinois Urbana Champaign]

doi:10.1007/s00348-026-04234-x

DOE OSTI · 3682538

MRV Challenge 3: velocity and passive scalar comparison in a 3D turbulent flow

Benson, Mike [ORNL] (ORCID:000000023210116X)·Nguyen, Thien D. [ORNL] (ORCID:0000000159722006)·Romig, Swantje [University of Rostock]·Dagobert, Louis [Binghamton University (SUNY)]·Borup, Daniel [Borup Solutions, LLC]·Bruschewski, Martin [University of Rostock]·John, Kristine [University of Rostock]·Grundmann, Sven [University of Rostock]·Song, Simon [Hanyang University, Korea]·Dong, Hangfei [Hanyang University, Korea]·Banko, Andrew [U.S. Military Academy]·Elkins, Christopher [Elkins Engineering, LLC]·Villafane, Laura [University of Illinois Urbana Champaign]·Bandopadhyay, Tuhin [University of Illinois Urbana Champaign]

View original source ↗Read source document ↗Export metadata ↓

Abstract

The third iteration of a magnetic resonance velocimetry (MRV) challenge comparison activity consisting of 3D flow measurements for a turbulent flow in a water channel moving past centrally positioned cubic obstacles is reported. In this challenge iteration, MRV measurements are coupled with either temperature or concentration measurements to extend the diagnostic utility. Five research teams from around the world conducted the measurements on a single shared apparatus. The water channel included partial elements along the channel sidewalls that varied in height and precluded easy optical accessibility. In addition to a turbulent mainstream flow, a secondary flow entered the channel between the second and third cubic elements from a square injector hole at the channel bottom wall. The injector jet interacts with the mainstream flow and mixes turbulently as it advects downstream. For the selected flow regime and water solutions used as working fluids, the mixing of the higher temperature or concentration through the secondary flow with the mainstream flow satisfies the same dynamics so that both temperature and concentration fields behave as passive scalars and can be directly compared. The measurements are explained in detail by each participating team, and the results are interpolated onto a common grid and compared using line profiles, contour plots, and isosurfaces.

Keep this discovery

BibTeX RIS

Benson, Mike [ORNL] (ORCID:000000023210116X), Nguyen, Thien D. [ORNL] (ORCID:0000000159722006), Romig, Swantje [University of Rostock], Dagobert, Louis [Binghamton University (SUNY)], Borup, Daniel [Borup Solutions, LLC], Bruschewski, Martin [University of Rostock], John, Kristine [University of Rostock], Grundmann, Sven [University of Rostock], Song, Simon [Hanyang University, Korea], Dong, Hangfei [Hanyang University, Korea], Banko, Andrew [U.S. Military Academy], Elkins, Christopher [Elkins Engineering, LLC], Villafane, Laura [University of Illinois Urbana Champaign], Bandopadhyay, Tuhin [University of Illinois Urbana Champaign]. 2026-08-01. MRV Challenge 3: velocity and passive scalar comparison in a 3D turbulent flow. https://doi.org/10.1007/s00348-026-04234-x

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

DOE OSTI2025

AIVT: Inference of turbulent thermal convection from measured 3D velocity data by physics-informed Kolmogorov-Arnold networks

We propose the artificial intelligence velocimetry-thermometry (AIVT) method to reconstruct a continuous and differentiable representation of the temperature and velocity in turbulent convection from measured three-dimensional (3D) velocity data. AIVT is based on physics-informed Kolmogorov-Arnold networks and trained by optimizing a loss function that minimizes residuals of the velocity data, boundary conditions, and governing equations. We apply AIVT to a set of simultaneously measured 3D temperature and velocity data of Rayleigh-Bénard convection, obtained by combining particle image thermometry and Lagrangian particle tracking. This enables us to directly compare machine learning results to true volumetric, simultaneous temperature and velocity measurements. We demonstrate that AIVT can reconstruct and infer continuous, instantaneous velocity and temperature fields and their gradients from sparse experimental data at a high resolution, providing an additional approach for understanding thermal turbulence.

Science & Technology - Other Topics↗

DOE OSTI2025

Numerical simulation of frost formation and heat transfer on fin-and-tube heat exchangers in turbulent cross-flow

Frost formation in fin-and-tube heat exchangers in turbulent cross-flow presents significant challenges in industrial refrigeration applications, affecting heat transfer efficiency and operational reliability. The purpose of this work is to investigate frost deposition and growth on a staggered bank of a fin-and-tube freezer coil under turbulent forced convection conditions. The focus here is on investigating conditions that closely replicate real-world scenarios in large walk-in industrial freezers. Using a direct numerical simulation approach, we examine the flow dynamics and thermal behaviour in the presence of frost, considering turbulent regimes characterized by a Reynolds number in the range 1050 ≤ R e D , avg ≤ 4800 , with the characteristic length being the outer diameter of the tube and the velocity being the bulk fluid velocity between the plates (fins). Computational fluid dynamics simulations are employed to resolve the interactions between turbulent airflow and the frost layer. Our approach incorporates a modified immersed boundary method and a slow-time acceleration technique to address the complex dynamic interface between the continuously evolving frost layer and the flowing air stream. Our findings indicate that frost forms more on the sides of the finned surfaces (plates) and less on the tubes themselves. This article is part of the theme issue ‘Heat and mass transfer in frost and ice’.

Science & Technology - Other Topics↗

NASA NTRS1995

Turbulance Boundary Conditions for Shear Flow Analysis, Using the DTNS Flow Solver

The effects of different turbulence boundary conditions were examined for two classical flows: a turbulent plane free shear layer and a flat plate turbulent boundary layer with zero pressure gradient. The flow solver used was DTNS, an incompressible Reynolds averaged Navier-Stokes solver with k-epsilon turbulence modeling, developed at the U.S. Navy David Taylor Research Center. Six different combinations of turbulence boundary conditions at the inflow boundary were investigated: In case 1, 'exact' k and epsilon profiles were used; in case 2, the 'exact' k profile was used, and epsilon was extrapolated upstream; in case 3, both k and epsilon were extrapolated; in case 4, the turbulence intensity (I) was 1 percent, and the turbulent viscosity (mu(sub t)) was equal to the laminar viscosity; in case 5, the 'exact' k profile was used and mu(sub t) was equal to the laminar viscosity; in case 6, the I was 1 percent, and epsilon was extrapolated. Comparisons were made with experimental data, direct numerical simulation results, or theoretical predictions as applicable. Results obtained with DTNS showed that turbulence boundary conditions can have significant impacts on the solutions, especially for the free shear layer.

M Mizukami↗