DOE OSTI · 3378216
Power and particle exhaust in the ST-E1 fusion power plant
Abstract
Power exhaust challenges and potential solutions for a 5 m major radius, low-aspect ratio burning tokamak have been explored. 1D edge plasma models have been used to screen for access to detachment using short and long outer divertor legs in double and single null configurations, using Ar as the primary impurity and assuming tungsten plasma-facing components (PFCs). These show that detachment access can be accessed for all but the most conservative assumptions on scrape-off layer (SOL) width and power, but that trade-offs will be required between magnet engineering and the size of the acceptable window of as-yet uncertain plasma parameters. SOLPS-ITER was used to further model selected plasma scenarios, confirming that Ar seeding can be used to achieve dissipative divertor scenarios with peak deposited heat fluxes below 15 MWm -2 . Initial scoping of first wall loads and positioning of limiters has been carried out, showing the feasibility of protecting the breeding blanket wall during steady state without impeding tritium breeding. Initial PFC technology selection is also presented, identifying this as a critical area where further work is needed to find an attractive solution for helium-cooled PFCs that can handle high heat fluxes without excessive power requirements. Key questions and trade-offs for concept development have been identified, including: how to achieve high radiation for reduction of SOL power without core performance degradation; whether power exhaust can be well-controlled in a double null plasma; mechanical design and materials challenges of high-heat flux PFCs; and control of material erosion, redeposition and tritium retention.
Explore related subjects
Keep this discovery
Robinson, M. [Tokamak Energy Ltd., Oxfordshire (United Kingdom)] (ORCID:0000000307091219), Scarabosio, A. [Tokamak Energy Ltd., Oxfordshire (United Kingdom); Fondazione LINKS, Turin (Italy)] (ORCID:0000000273726975), Vekshina, E. [Tokamak Energy Ltd., Oxfordshire (United Kingdom)] (ORCID:0000000197715579), Nichols, J. H. [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)] (ORCID:0000000196292252), Lore, J. D. [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)] (ORCID:000000029192465X), Borowiec, K. [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)] (ORCID:0000000335911739), Varje, J. [Tokamak Energy Ltd., Oxfordshire (United Kingdom)] (ORCID:0000000341372436), Levine, S. M. [Tokamak Energy Ltd., Oxfordshire (United Kingdom)] (ORCID:000000029562104X), Scarpari, M. [Tokamak Energy Ltd., Oxfordshire (United Kingdom)] (ORCID:0000000162460131), Maartensson, E. N. J. [Tokamak Energy Ltd., Oxfordshire (United Kingdom)] (ORCID:0009000072898516), Zhang, X. [Tokamak Energy Ltd., Oxfordshire (United Kingdom)] (ORCID:0000000337755821), Kamenicky, R. [Tokamak Energy Ltd., Oxfordshire (United Kingdom)] (ORCID:0000000262922313), Alexander, J. [Tokamak Energy Ltd., Oxfordshire (United Kingdom)], Jackson, M. [Tokamak Energy Ltd., Oxfordshire (United Kingdom)] (ORCID:000000026551987X), Marsden, C. [Tokamak Energy Ltd., Oxfordshire (United Kingdom)] (ORCID:0000000313225236), McNamara, S. A. M. [Tokamak Energy Ltd., Oxfordshire (United Kingdom)] (ORCID:0000000204775247), Maingi, R. [Princeton Plasma Physics Laboratory (PPPL), Princeton, NJ (United States)] (ORCID:0000000312388121). 2026-07-10. Power and particle exhaust in the ST-E1 fusion power plant. https://doi.org/10.1088/1741-4326/ae70a0
Cite the original work for its findings. Save a collection to share your selection of sources.
Discover connections
Connections use source metadata and explicit phrase matches, not verified experimental comparisons.