DOE OSTI · 3013318
Fabrication and Evaluation of Large Alumina Crucibles by Vat Photopolymerization Additive Manufacturing for High-Temperature Actinide Chemistry
Abstract
Additive manufacturing (AM) offers opportunities to advance the design and function of ceramic tooling in high temperature actinide pyrochemistry. In technical ceramics such as alumina, conventional forming techniques often restrict design flexibility and can limit experimental progress. In this study, we investigate the use of vat photopolymerization (VP) with commercial resins to fabricate large-scale alumina crucibles, reaching dimensions up to 125 mm, which is significantly larger than typically reported for dense VP ceramics. Notably, these additively manufactured components are produced using consumer-grade hardware, which limits process control, but offers significant upside in scalability and accessibility. Using microscopy and X-ray computed tomography, the VP alumina parts have high bulk densities above 95%, but also the prevalence of AM-induced artifacts and surface defects. Mechanical testing showed these defects to significantly reduce flexural strength and compromise part reliability. Electrorefining trials under sustained exposure to molten salts and metals reveal mixed results, with the AM material exhibiting high chemical compatibility, but mechanical failures due to the reduced strength were prevalent. Our findings illustrate both the promise and current limitations of AM ceramics for actinide chemistry, and point toward future improvements in process optimization, design strategies, and part screening to enhance performance and reliability.
Explore related subjects
Keep this discovery
Explore connections, maps & timelines
Griffiths, R. Joey [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)], Santoyo, Christy [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)], Forien, Jean-Baptiste [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:0000000292292455), Childs, Bradley [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)], Swift, Andrew J. [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:0000000279035032), Cho, Andrew [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States); Univ. of California, Irvine, CA (United States)], Wilson-Heid, Alexander [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:0000000167590090), Ankrah, George [Brigham Young Univ., Provo, UT (United States)], Rappleye, Devin [Brigham Young Univ., Provo, UT (United States)] (ORCID:0000000240087193), Martin, Aiden A. [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)] (ORCID:0000000323625524), Jeffries, Jason [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)], Holliday, Kiel [Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)]. 2025-12-02. Fabrication and Evaluation of Large Alumina Crucibles by Vat Photopolymerization Additive Manufacturing for High-Temperature Actinide Chemistry. https://doi.org/10.3390/app152312742
Cite the original work for its findings. Save a collection to share your selection of sources.