Engineering Papers⌕ Search

DOE OSTI · 1653045

Materials Data on Y6Mn14Fe9 by Materials Project

Abstract

Y6Mn14Fe9 crystallizes in the cubic Fm-3m space group. The structure is three-dimensional. Y is bonded in a 12-coordinate geometry to eight Mn and four equivalent Fe atoms. There are four shorter (2.91 Å) and four longer (3.04 Å) Y–Mn bond lengths. All Y–Fe bond lengths are 3.07 Å. There are two inequivalent Mn sites. In the first Mn site, Mn is bonded to four equivalent Y, four equivalent Mn, and four equivalent Fe atoms to form distorted MnY4Mn4Fe4 cuboctahedra that share corners with four equivalent MnY4Mn4Fe4 cuboctahedra, corners with eight equivalent FeY3Mn6Fe3 cuboctahedra, faces with eight equivalent MnY4Mn4Fe4 cuboctahedra, and faces with eight equivalent FeY3Mn6Fe3 cuboctahedra. All Mn–Mn bond lengths are 2.64 Å. All Mn–Fe bond lengths are 2.46 Å. In the second Mn site, Mn is bonded in a 1-coordinate geometry to three equivalent Y, six Mn, and four Fe atoms. All Mn–Mn bond lengths are 2.87 Å. There are one shorter (2.49 Å) and three longer (2.61 Å) Mn–Fe bond lengths. There are two inequivalent Fe sites. In the first Fe site, Fe is bonded in a body-centered cubic geometry to eight equivalent Mn atoms. In the second Fe site, Fe is bonded to three equivalent Y, six Mn, and three equivalent Fe atoms to form distorted FeY3Mn6Fe3 cuboctahedra that share corners with six equivalent MnY4Mn4Fe4 cuboctahedra, corners with six equivalent FeY3Mn6Fe3 cuboctahedra, faces with six equivalent MnY4Mn4Fe4 cuboctahedra, and faces with six equivalent FeY3Mn6Fe3 cuboctahedra. All Fe–Fe bond lengths are 2.38 Å.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

2020-07-23. Materials Data on Y6Mn14Fe9 by Materials Project. https://doi.org/10.17188/1653045

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗