Engineering Papers⌕ Search

DOE OSTI · 1531600

Ceramic assembly with a stabilizer layer

Abstract

In one embodiment, the method of producing a ceramic assembly includes: disposing an electrode precursor on an electrolyte precursor having an electrolyte sintering shrinkage, disposing a stabilizer precursor having a stabilizer sintering shrinkage on the electrode precursor on a side opposite the electrolyte precursor to form a precursor assembly, and sintering the precursor assembly to form the ceramic assembly comprising a stabilizer layer, electrode, and electrolyte. The difference between the electrolyte sintering shrinkage and the stabilizer sintering shrinkage is less than or equal to ±1% and a surface of the ceramic assembly has less than or equal to about 5.0 degrees camber, as measured from the horizontal plane.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Svoboda, Robert J., Simpkins, Haskell, Keller, Joseph M., Sprenkle, Vincent L., Meinhardt, Kerry D., Canfield, Nathan L.. 2009-09-29. Ceramic assembly with a stabilizer layer. https://www.osti.gov/biblio/1531600

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗