Engineering Papers⌕ Search

DOE OSTI · 1395295

Simulation Methods for Transactive Energy

Abstract

Transactive energy is a new approach for managing the electric power distribution system based on principles of economic value, with engineering constraints. This combined approach is well established in the bulk power system, but transactive energy incorporates many more participants and new types of participant, including end-use loads and distributed energy resources. The market mechanisms are new and largely untested, which calls for careful design to avoid unwanted results and behaviors. The supporting simulation platforms must be flexible and multi-disciplinary (market, distribution grid, bulk grid, buildings, appliances, distributed energy resources, communication systems). These platforms make it possible for products to be developed and tested on large realistic models, before deployment into the real world.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

McDermott, Thomas E., Burns, M., Chassin, D. P., Holmberg, D., Neema, H., Ran, B., Sztipanovits, J., Wijbrandi, W.. 2017-09-28. Simulation Methods for Transactive Energy. https://www.osti.gov/biblio/1395295

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Real-World Distribution System Modeling Framework for Transmission-and-Distribution Cosimulation: Preprint

This paper presents a modeling methodology for realistic distribution system simulation and analysis. The methodology involves three major approaches: utility model conversion, feeder load modeling, and feeder model validation. The feeder models obtained from the utility are converted to the format that is more flexible for analysis and algorithm development. The load profiles down to each node are modeled in detail using advanced metering infrastructure data and supervisory control and data acquisition (SCADA) system measured load data. Then the distribution system models are validated by comparing the simulated feeder-head voltage results and SCADA measured voltage data. To better understand the bulk system operations and the interactions between transmission and distribution systems, the modeled realistic distribution systems are integrated into a transmission-and-distribution cosimulation framework to perform the system simulation from the bulk system down to each node in the distribution system.

load modeling↗