Ice Shape Classification for Swept Wings

Michael B. Bragg; William Yoshida; Andy P Broeren; Sam Lee; Brian S. Woodard

NASA NTRS · 20205001923

Ice Shape Classification for Swept Wings

Michael B. Bragg·William Yoshida·Andy P Broeren·Sam Lee·Brian S. Woodard

Abstract

An important consideration for swept-wing ice shapes is the level of geometric fidelity required to accurately capture the aerodynamics. One way to help make the task of addressing this more manageable is to organize the ice shapes into a small number of classifications. These classifications are done by grouping similar ice shape geometries that also have similar iced wing aerodynamics. Ice shape classifications for airfoils are more mature and are reviewed as an example. Swept wing ice shape classifications are based on the well-established airfoil classifications and here five classifications are proposed: leading-edge roughness, streamwise ice, 3D leading-edge horn, highly 3D leading-edge horn and spanwise ridge. Recent data on swept wing icing aerodynamics is used to develop and support this classification. The development, or suppression, of the leading-edge separation vortex on swept wings without a leading-edge device is seen to be key in the classification of the highly 3D leading-edge horn.

Explore related subjects

Aircraft icing Aerodynamics Scale models

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Michael B. Bragg, William Yoshida, Andy P Broeren, Sam Lee, Brian S. Woodard. Ice Shape Classification for Swept Wings. https://ntrs.nasa.gov/citations/20205001923

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

NASA NTRS2022

Experimental and Computational Icing Simulation for Large Swept Wings

The purpose of this final report is to summarize the key results, findings and contributions of a large, multi-organization, multi-year effort focused on swept wing icing and aerodynamics. This research effort was jointly sponsored by NASA, FAA and ONERA and was supported by Boeing and the Universities of Illinois, Virginia, and Washington. The overall goal of this research was to improve the experimental and computational simulation capability for icing on large swept wings typical of commercial transports. This research included both ice accretion and aerodynamic studies using the NASA Common Research Model (CRM) as the reference geometry. For this work, a 65% scaled version—CRM65—was used as the full-scale baseline airplane geometry. This program marks the first non-proprietary research to generate and document full-scale swept wing ice accretions in an icing tunnel and then conduct semispan wing aerodynamic testing on scaled ice accretions at high Reynolds number (i.e., up to 11.9×106). During this work, several new experimental and computational techniques were developed or documented and new knowledge about swept wing icing aerodynamics was identified. All are documented in this report.

Aircraft icing↗

NASA NTRS2019

Independent Effects of Reynolds Number and Mach Number on the Aerodynamics of an Iced Swept Wing

Aerodynamic assessment of icing effects on swept wings is an important component of a larger effort to improve three-dimensional (3D) icing simulation capabilities. An understanding of ice-shape geometric fidelity and Reynolds and Mach number effects on the iced-wing aerodynamics is needed to guide the development and validation of ice-accretion simulation tools. To this end, wind tunnel testing was carried out for a 13.3-percent-scale semispan wing based upon the Common Research Model airplane configuration. The wind tunnel testing was conducted at the Office National d’Etudes et de Recherches Aérospatiales (ONERA) F1 pressurized wind tunnel with Reynolds numbers of 1.6 x 10(exp 6) to 11.9 x 10(exp 6 ) and Mach numbers of 0.09 to 0.34. Five different configurations were investigated using fully 3D, high-fidelity artificial ice shapes that maintain nearly all of the 3D ice-accretion features documented in prior icing wind tunnel tests. These large, leading-edge ice shapes were nominally based upon airplane holding in icing conditions scenarios. For three of these configurations, lower fidelity simulations were also built and tested. The results presented in this paper show that while Reynolds and Mach number effects are important for quantifying the clean-wing performance, there is very little to no effect for an iced wing with 3D, high-fidelity artificial ice shapes or 3D smooth ice shapes with grit roughness. These conclusions are consistent with the large volume of past research on iced airfoils. However, some differences were also noted for the associated stalling angle of the iced swept wing and for various lower fidelity versions of the leading-edge ice accretion. More research is planned to further investigate the key features of ice-accretion geometry that must be simulated in lower fidelity versions in order to capture the essential aerodynamics.

Aircraft icing↗

NASA NTRS2019

Summary of the High Ice Water Content (HIWC) RADAR Flight Campaigns

NASA and the FAA conducted two flight campaigns to quantify onboard weather radar measurements with in-situ measurements of high concentrations of ice crystals found in deep convective storms. The ultimate goal of this research was to improve the understanding and develop onboard weather radar processing to detect regions of high ice water content ahead of an aircraft and enable tactical avoidance of the potentially hazardous conditions. Both High Ice Water Content (HIWC) RADAR campaigns utilized the NASA DC-8 Airborne Science Laboratory which was equipped with a Honeywell RDR-4000 weather radar and icing instruments to characterize the ice crystals clouds. The purpose of this paper is to summarize how these campaigns were conducted and highlight key results.

Aircraft icing↗