Engineering Papers⌕ Search

NASA NTRS · 20010061367

MEMS Incandescent Light Source

Abstract

A MEMS-based, low-power, incandescent light source is being developed. This light source is fabricated using three bonded chips. The bottom chip consists of a reflector on Silicon, the middle chip contains a Tungsten filament bonded to silicon and the top layer is a transparent window. A 25-micrometer-thick spiral filament is fabricated in Tungsten using lithography and wet-etching. A proof-of-concept device has been fabricated and tested in a vacuum chamber. Results indicate that the filament is electrically heated to approximately 2650 K. The power required to drive the proof-of-concept spiral filament to incandescence is 1.25 W. The emitted optical power is expected to be approximately 1.0 W with the spectral peak at 1.1 microns. The micromachining techniques used to fabricate this light source can be applied to other MEMS devices.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Tuma, Margaret, King, Kevin, Kim, Lynn, Hansler, Richard, Jones, Eric, George, Thomas. 2001-01-01. MEMS Incandescent Light Source. https://engineeringpapers.com/record/nasa%3A20010061367/mems-incandescent-light-source

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite Engineering Papers by Indiciae: BibTeX · RIS.