Beta in Streamers

Abstract

Streamers are generally described as regions of the corona in which the density is higher than in coronal holes because the plasma is trapped by closed loops of magnetic flux. In contrast, MHD models of the global corona show the plasma beta in streamers above siml.2R_S (heliocentric). There are three recent contributions to this topic. The first is that heating near the cusp further drives beta up and results in release of new slow solar wind plasma from the top of the streamer. The second is SOHO/UVCS observations, in combination with a potential field/source surface model of the magnetic field, that show beta above 1.2R_S in a streamer observed near solar sunspot minimum. The third is a magnetic field reconstruction technique that uses field deforming algorithms and is more versatile for local fields than potential field models . The field reconstruction algorithm was applied to an isolated active region (AR 7999) and to the Pneuman Kopp global MHD model (beta has never been published for their model). In the active region, beta becomes larger than unity at siml.2 R_S. In the Pneuman & Kopp model, beta at the base of the streamer and rises with increasing height, becoming 15-20 at 1.6R_S and 35- 50 at 1.7R_S. Global simulations go on to show that the reason streamers do not simply explode under such high beta conditions is that they are held down by pressure from the sides due to the magnetic fields (and low beta) in adjacent coronal holes. The main role of the closed magnetic loop near the cusp is to keep the steamer from continuously leaking plasma, as otherwise happens in a magnetic pinch which is similar but has no closed loops. Awareness of MHD physical conditions in streamers is causing us to focus more attention on the details of the heating. On obvious suggestion is that heating is at much lower heights in streamers than in coronal holes. Also, energy which is directly delivered as momentum in coronal holes might all be deposited as heat in streamers.