Toward decimeter Topex orbit determination using GPS

Abstract

Several practical aspects of precision GPS-based Topex orbit determination are investigated. Multipath signals contaminating Topex pseudorange data are greatly reduced by placing the GPS antenna on a conducting backplate consisting of concentric choke rings to attenuate signals coming in from the Topex horizon and below, and by elevating it on a boom to keep it well above all reflecting surfaces. A proper GPS antenna cutoff view angle is chosen so that a sufficient number of GPS satellites with good geometry are in view while reception of reflected signals is minimized. The geometrical strength of the tracking data is optimized by properly selecting GPS satellites to be observed so as to provide data with moderate continuity, low PDOP, and common visibility with ground tracking sites. The tracking performance is greatly enhanced when three complementary sites are added to the minimum ground tracking network consisting of the three NASA DSN sites.