Engineering Papers⌕ Search

Engineering topics

Propulsion

Explore propulsion reports from NASA NTRS and DOE OSTI. Search rocket engines, electric propulsion and thrusters; verify designs and performance in the source documents.

Follow this topic with RSS
At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Recent sounding rocket highlights and a concept for melding sounding rocket and space shuttle activities

Highlights include launching guided vehicles into the African Solar Eclipse, initiation of development of a Three-Stage Black Brant to explore the dayside polar cusp, large payload Aries Flights at White Sands Missile Range, and an active program with the Orion vehicle family using surplus motors. Sounding rocket philosophy and experience is being applied to the shuttle in a Get Away Special and Experiments of Opportunity Payloads Programs. In addition, an orbit selection and targeting software system to support shuttle pallet mounted experiments is under development.

Lane, J. H.↗
NASA NTRS1982

On-orbit propulsion requirements and performance assessment of ion propulsion subsystems for future GEO large satellite missions

It is pointed out that a large class of future spacecraft, referred to as large space structures (LSS), will require advanced stationkeeping thrust subsystems. The present investigation is concerned with the performance requirements of such advanced stationkeeping thrust subsystems. An analytical model is employed to evaluate the sensitivity of the total stationkeeping thrust-system mass, for geosynchronous spacecraft, to variations in the mission parameters and thrust-system performance, taking into account ion propulsion thrust systems. The model is formulated for geosynchronous missions and considers only the N-S orbit perturbations due to sun-moon forces and the E-W orbit perturbations due to solar pressure, since these are the dominant orbit perturbations of LSS missions. The thrust system is scaled in relation to the performance capabilities of the existing 8- and 30-cm diameter ion-thruster technology and consists of separate N-S and E-W thrusters.

Wessel, F. J.↗
NASA NTRS1982

A study of mesospheric rocket contrails and clouds produced by liquid-fueled rockets

Changes in the atmospheric composition, particularly through the condensation of rocket vehicle exhaust, caused by the flights of 400 heavy lift launch vehicles (HLLV) to carry crews and materials into space to build a satellite solar power system (SPS) were examined. Attention was given to the formation of mesospheric contrails and clouds. A one-dimensional model was used to formulate the photochemistry and vertical transport of water vapor, its nucleation into an ice cloud, and the microphysical development of the cloud. Considering one HLLV launch per day for a decade, it is projected that the upper atmosphere water vapor concentration would be increased by 10-20%, thereby augmenting the size and opacity of natural noctilucent clouds by 50%. No climatological consequences are foreseen from the clouds, although spectacular noctiluminescent cloud displays are thought to be possible.

Turco, R. P.↗
NASA NTRS1986

Space station propulsion technology: Space station propulsion system test bed test plan

Testing of the hydrogen/oxygen Space Station Propulsion System will demonstrate the technology readiness for the IOC application. To facilitate early demonstration of this technology and to allow demonstration of maturing technology, this testing will be performed with the components installed on a test bed which simulated the Space Station Structure. The test plan contains a description of the test bed, test objective, instrumentation plan, and controls plan. Each of these is discussed in detail.

Briley, G. L.↗
NASA NTRS1989

Liquid Rocket Booster (LRB) for the Space Transportation System (STS) systems study. Appendix A: Stress analysis report for the pump-fed and pressure-fed liquid rocket booster

Pressure effects on the pump-fed Liquid Rocket Booster (LRB) of the Space Transportation System are examined. Results from the buckling tests; bending moments tests; barrel, propellant tanks, frame XB1513, nose cone, and intertank tests; and finite element examination of forward and aft skirts are presented.

Source record↗
NASA NTRS1992

Computational fluid dynamics for propulsion technology: Geometric grid visualization in CFD-based propulsion technology research

The coordination is examined of necessary resources, facilities, and special personnel to provide technical integration activities in the area of computational fluid dynamics applied to propulsion technology. Involved is the coordination of CFD activities between government, industry, and universities. Current geometry modeling, grid generation, and graphical methods are established to use in the analysis of CFD design methodologies.

Ziebarth, John P.↗
NASA NTRS1992

Advanced propulsion for LEO-Moon transport. 1: A method for evaluating advanced propulsion performance

This report describes a study to evaluate the benefits of advanced propulsion technologies for transporting materials between low Earth orbit and the Moon. A relatively conventional reference transportation system, and several other systems, each of which includes one advanced technology component, are compared in terms of how well they perform a chosen mission objective. The evaluation method is based on a pairwise life-cycle cost comparison of each of the advanced systems with the reference system. Somewhat novel and economically important features of the procedure are the inclusion not only of mass payback ratios based on Earth launch costs, but also of repair and capital acquisition costs, and of adjustments in the latter to reflect the technological maturity of the advanced technologies. The required input information is developed by panels of experts. The overall scope and approach of the study are presented in the introduction. The bulk of the paper describes the evaluation method; the reference system and an advanced transportation system, including a spinning tether in an eccentric Earth orbit, are used to illustrate it.

Stern, Martin O.↗
NASA NTRS1993

A minimum cost tolerance allocation method for rocket engines and robust rocket engine design

Rocket engine design follows three phases: systems design, parameter design, and tolerance design. Systems design and parameter design are most effectively conducted in a concurrent engineering (CE) environment that utilize methods such as Quality Function Deployment and Taguchi methods. However, tolerance allocation remains an art driven by experience, handbooks, and rules of thumb. It was desirable to develop and optimization approach to tolerancing. The case study engine was the STME gas generator cycle. The design of the major components had been completed and the functional relationship between the component tolerances and system performance had been computed using the Generic Power Balance model. The system performance nominals (thrust, MR, and Isp) and tolerances were already specified, as were an initial set of component tolerances. However, the question was whether there existed an optimal combination of tolerances that would result in the minimum cost without any degradation in system performance.

Gerth, Richard J.↗
NASA NTRS1993

Orbital transfer rocket engine technology 7.5K-LB thrust rocket engine preliminary design

A preliminary design of an advanced LOX/LH2 expander cycle rocket engine producing 7,500 lbf thrust for Orbital Transfer vehicle missions was completed. Engine system, component and turbomachinery analysis at both on design and off design conditions were completed. The preliminary design analysis results showed engine requirements and performance goals were met. Computer models are described and model outputs are presented. Engine system assembly layouts, component layouts and valve and control system analysis are presented. Major design technologies were identified and remaining issues and concerns were listed.

Harmon, T. J.↗
NASA NTRS1992

Operationally Efficient Propulsion System Study (OEPSS) Data Book: Integrated Booster Propulsion Module (BPM) Engine Start Dynamics - Volume 8

A fluid-dynamic, digital-transient computer model of an integrated, parallel propulsion system was developed for the CDC mainframe and the SUN workstation computers. Since all STME component designs were used for the integrated system, computer subroutines were written characterizing the performance and geometry of all the components used in the system, including the manifolds. Three transient analysis reports were completed. The first report evaluated the feasibility of integrated engine systems in regards to the start and cutoff transient behavior. The second report evaluated turbopump out and combined thrust chamber/turbopump out conditions. The third report presented sensitivity study results in staggered gas generator spin start and in pump performance characteristics.

Kemp, Victoria R.↗
NASA NTRS1992

Operationally efficient propulsion system study (OEPSS) data book: Preliminary Development Plan for an Integrated Booster Propulsion Module (BPM) - Volume 9

A preliminary development plan for an integrated propulsion module (IPM) is described. The IPM, similar to the Space Transportation Main engine (STME) engine, is applicable to the Advanced Launch System (ALS) baseline vehicle. The same STME development program ground rules and time schedule were assumed for the IPM. However, the unique advantages of testing an integrated engine element, in terms of reduced number of hardware and number of system and reliability tests, compared to single standalone engine and MPTA, are highlighted. The potential ability of the IPM to meet the ALS program goals for robustness, operability and reliability is emphasized.

DiBlasi, Angelo G.↗
NASA NTRS2004

In-Space Propulsion (ISP) Solar Sail Propulsion Technology Development

An overview of the rationale and content for Solar Sail Propulsion (SSP), the on-going project to advance solar technology from technology readiness level 3 to 6 will be provided. A descriptive summary of the major and minor component efforts underway will include identification of the technology providers and a listing of anticipated products Recent important results from major system ground demonstrators will be provided. Finally, a current status of all activities will provided along with the most recent roadmap for the SSP technology development program.

Montgomery, Edward E., IV↗
NASA NTRS2005

Local Flow Conditions for Propulsion Experiments on the NASA F-15B Propulsion Flight Test Fixture

Local flow conditions were measured underneath the National Aeronautics and Space Administration F-15B airplane to support development of future experiments on the Propulsion Flight Test Fixture (PFTF). The local Mach number and flow angles were measured using a conventional air data boom on a cone-cylinder mounted under the PFTF and compared with the airplane air data nose boom measurements. At subsonic flight speeds, the airplane and PFTF Mach numbers were approximately equal. Transonic Mach number values were up to 0.1 greater at the PFTF than the airplane, which is a counterintuitive result. The PFTF local supersonic Mach numbers were as much as 0.46 less than the airplane values. The maximum local Mach number at the PFTF was approximately 1.6 at an airplane Mach number near 2.0. The PFTF local angle of attack was negative at all Mach numbers, ranging from -3 to -8 degrees. When the airplane angle of sideslip was zero, the PFTF local value was zero between Mach 0.8 and Mach 1.1, -2 degrees between Mach 1.1 and Mach 1.5, and increased from zero to 1 degree from Mach 1.5 to Mach 2.0. Airplane inlet shock waves crossed the aerodynamic interface plane between Mach 1.85 and Mach 1.90.

Vachon, Michael J.↗
NASA NTRS2019

Overview of the Main Propulsion System for a Nuclear Thermal Propulsion Flight Demonstrator

A demonstration of a Nuclear Thermal Propulsion (NTP) engine has not been conducted in over 50 years. Several tests were conducted during the NERVA program but no NTP engine was ever flown in space. In the last several years there has been a considerable amount of conceptual design work on NTP engines conducted. With the prospect of human Mars missions in the 2030’s there has been a renewed interest in NTP engines. A concept design study was conducted with the intent to design 2 flight demonstrator vehicles that would buy down programmatic and technical risks associated with launching and operating nuclear reactors in space. The intent of the first demonstrator mission would be to employ a simplified NTP engine and buy down programmatic risks whereas the second demonstrator would buy down technical risks with a NTP engine designed to be similar to an operational NTP model. The results of the study showed that a simplified NTP engine demonstrator could be feasibly built and flown in the near term with mostly high TRL, commercial off-the-shelf components.

Simpson, S. P.↗
NASA NTRS2020

Power and Propulsion Element for Gateway: Configuration and Data Management of the NASA Power and Propulsion Element MBSE Model(s)

The following will be presented: CM/DM implementation environment for MBSE, traditional construct of CM/MBSE, goal for power and propulsion element team for CM/MBSE, steps to bridge the gap between CM and MBSE, how we implemented the standard tenets of CM, realized efficiencies, encountered challenges, lessons learned, and current state, and forward/future work.

Parrott, Edith L.↗