Engineering topics

Zylstra, A.

Publications and source records attributed to Zylstra, A..

7 records

DOE OSTI2023

Diagnosing the origin and impact of low-mode asymmetries in ignition experiments at the National Ignition Facility

Inertial confinement fusion ignition requires high inflight shell velocity, good energy coupling between the hotspot and shell, and high areal density at peak compression. Three-dimensional asymmetries caused by imperfections in the drive symmetry or target can grow and damage the coupling and confinement. Recent high-yield experiments have shown that low-mode asymmetries are a key degradation mechanism and contribute to variability. Here we show the experimental signatures and impacts of asymmetry change with increasing implosion yield given the same initial cause. This letter has implications for improving robustness to a key degradation in ignition experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Characterization of a platform for the gas transport, collection, and identification of fission products in the high-intensity laser environment

Recent progress in the production of laser accelerated high flux proton beams opens new possibilities for the study of fission in unique environments. To this end, we are currently pursuing the development of a platform for the swift gas transport, collection, and identification of fission products. Fission is induced in targets fixed inside a sealed chamber through which a carrier gas flows, transporting fission products to a carbon filter for collection and online spectroscopy. This has been recently demonstrated using target normal sheath accelerated protons at the PHELIX laser facility. There were large discrepancies between measured rates and those expected based on established fission yields and measured beam parameters. These discrepancies prompted a large number of tests at the Idaho Accelerator Center (IAC), where fission in uranium is induced by bremsstrahlung photons generated by 21 MeV electrons from a linear electron accelerator. Here, the results are compared to a series of models that account for the slowing of energetic fission fragments in the carrier gas and the fluid dynamics of the gas flow that transports fission products to the collection filter. Characterization of the apparatus reveals a few mechanisms that together account for a portion of the previously observed discrepancies at the PHELIX laser facility. However, additional research is necessary before high-accuracy experiments can be performed with the apparatus. Work performed under the auspices of the U.S. Department of Energy by LLNL under contract DE-AC52-07NA27344.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2022

Experimental verification of TNSA protons and deuterons in the multi-picosecond moderate intensity regime

Ion acceleration from high intensity short pulse laser interactions is of great interest due to a number of applications, and there has been significant work carried out with laser energies up to a few 100 J with 10's of femtosecond to 1 ps pulse durations. Here, we report results from an experiment at the OMEGA EP laser, where laser energy and pulse length were varied from 100 to 1250 J and 0.7–30 ps, respectively, in the moderate (2 × 10 17 –2 × 10 18 W/cm 2 ) laser intensity regime. Ions and electrons were simultaneously measured from disk targets made of CH and CD by a Thomson parabola and a magnetic spectrometer, respectively. Measurements showed that the electron temperature, T e (MeV), has a dependence on the laser energy, E L (J), and pulse duration, τ L (ps), and its empirical scaling was found to be 0.015 × E L 0.90 τ L –0.48. The maximum proton and deuteron energies are linearly dependent on the electron temperature, (5.60 ± 0.26) × T e and (3.17 ± 0.18) × T e , respectively. A significant increase in proton numbers with the laser energy was also observed. Furthermore, the increase in the maximum proton energy and proton count with higher energy longer duration pulses presented in this article shows that such laser conditions have a great advantage for applications, such as the proton radiograph, in the moderate laser intensity regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Optimism is not a strategy: A white paper on how to give IFE a fighting chance to be real

With NIF shot N210808, we now have an existence proof of ignition (i.e. Lawson-like criteria exceeded and capsule gain well exceeding unity) in the laboratory and it has generated renewed interest in IFE. However, it is important to recognize that ignition on the NIF has been much more difficult than what was originally envisioned. Moreover, the design for the target that actually obtained burning plasma (Kritcher, Young, Robey, et al., Nature Phys. 2022; Zylstra, Hurricane, Callahan, et al., Nature, 601, 542, 2022) and ignition conditions is much different than the high gain design originally planned in the National Ignition Campaign (NIC; e.g. Lindl, Phys. Plasmas, 2, 3933, 1995; Lindl, Amendt, Berger, et al., Phys. Plasmas, 11, 339, 2004). In order to avoid squandering time and resources, the IFE community must learn the lessons of what happened on the NIF over the past decade.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Extensions of a classical mechanics “piston-model” for understanding the impact of asymmetry on ICF implosions: The cases of mode 2, mode 2/1 coupling, time-dependent asymmetry, and the relationship to coast-time

As long suspected, low mode asymmetry in inertially confined fusion (ICF) implosions has been implicated as a performance limiting factor [Casey et al., “Evidence of three-dimensional asymmetries seeded by high-density carbon-ablator nonuniformity in experiments at the national ignition facility,” Phys. Rev. Lett. 126, 025002 (2021)]. Recently a non-linear, but solvable, theory [Hurricane et al., “An analytic asymmetric-piston model for the impact of mode-1 shell asymmetry on ICF implosions,” Phys. Plasmas 27, 062704 (2020)] based upon the simple picture of a pair of asymmetric pistons has generated new insights and provided some practical formulas for estimating the degradation of an implosion due to mode-1 asymmetry and demonstrated a previously unrecognized connection between measured hot-spot drift velocity, nuclear down-scatter ratio asymmetry, and the concept of residual kinetic energy (RKE). Asymmetry of the implosion “shell,” as opposed to asymmetry of the hot-spot, was key to the classical mechanics model because the majority of the kinetic energy in an implosion is carried by the shell. Herein, the two-piston model is extended to a six-piston model in order to capture mode-2 asymmetry and coupling between mode-1 and mode-2. A key result of this new six-piston model is that the weighted harmonic mean of shell areal density is the fundamental quantity that determines the RKE and performance degradations for a three-dimensional implosion. Agreement is found between the scalings coming from the theory and ICF implosion data from the National Ignition Facility and to large ensembles of detailed simulations. The connection between the piston model's dependence upon the radius of peak velocity and coast-time is also highlighted in this paper. Finally, by extending the two-piston model to include time-dependent “swing,” it is shown in the Appendix that the shell asymmetry at the time of stagnation dominates the solution for RKE.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

FY20 LLNL Experimental Programs at Omega

In Fiscal Year 2020 (FY20), Lawrence Livermore National Laboratory’s (LLNL’s) High-Energy-Density Physics (HED) and Indirect Drive Inertial Confinement Fusion (ICF-ID) programs conducted numerous campaigns on the OMEGA and OMEGA-EP (EP) laser systems. This was the 22ndyear of National Lab collaborative experiments at OMEGA since the Nova Laser at LLNL shut down in 1999, building upon prior collaborations. In FY20overall,these LLNL programs led 375target shots, with 166shots using just the OMEGA laser system and209 shots using just the EP laser system. Approximately 34% of the total number of shots (35OMEGA shots and 93EP shots) supported the Indirect Drive Inertial Confinement Fusion Campaign. The remaining 66% (131OMEGA-only shots and 116EP-only shots) were dedicated to experiments for High-Energy-Density Physics.Highlights of the various HED and ICF-ID campaigns are summarized in the following reports.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Fill tube dynamics in inertial confinement fusion implosions with high density carbon ablators

Plasma jets, such as γ-ray burst jets, Herbig–Haro jets, μ-quasar jets, and active galactic nuclei jets, are found throughout the universe [S. Mendoza et al., Rev. Mex. Astron. Astrofis. 41, 453 (2005)]. Plasma jets are also present in indirect drive inertial confinement fusion experiments originating from the capsule's fill tube and occasionally from divots and voids in the capsules, particles on the exterior of the capsule, or from the tent holding the capsule in the target. This paper looks at two different gas-filled capsule implosions containing a plasma jet resulting from a capsule fill tube and fill channel, both of which utilized high density carbon ablators. Two models were developed, a drag and a snowplow model, which use the time-dependent motion of the injected mass through the hotspot to estimate the mass injected into the hotspot from the fill tube and channel, arriving at an average injected mass of ~84.5 ± 25.5 ng for the first experiment and 91 ± 20 ng for the second experiment. Furthermore, unlike previous methods to estimate fill tube injected mass, these techniques do not assume that the mixed mass is in thermal equilibrium with the hotspot or that the x-ray emission is only coming from within the hotspot itself. This paper also discusses the features seen in these experiments which include limb brightening in the shell for undoped ablators and flattening in the ablator from shadowing by the fill tube.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗