Engineering Papers⌕ Search

Engineering topics

Zorumski, W. E.

Publications and source records attributed to Zorumski, W. E..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Integration of a CAD System Into an MDO Framework

NASA Langley has developed a heterogeneous distributed computing environment, called the Framework for Inter-disciplinary Design Optimization, or FIDO. Its purpose has been to demonstrate framework technical feasibility and usefulness for optimizing the preliminary design of complex systems and to provide a working environment for testing optimization schemes. Its initial implementation has been for a simplified model of preliminary design of a high-speed civil transport. Upgrades being considered for the FIDO system include a more complete geometry description, required by high-fidelity aerodynamics and structures codes and based on a commercial Computer Aided Design (CAD) system. This report presents the philosophy behind some of the decisions that have shaped the FIDO system and gives a brief case study of the problems and successes encountered in integrating a CAD system into the FEDO framework.

Townsend, J. C.↗
NASA NTRS1993

Stability of high speed compressible rotating Couette flow

In this study, we consider the linear stability of high speed, rotating Couette flow to two and three-dimensional disturbances in finite-gap spacings, including the full effects of compressibility and viscosity. Particularly, the combined effects of Mach number, Reynolds number, radial heating, and gap spacing are investigated. For a stationary outer cylinder, the primary instability is an axisymmetric mode independent of the Mach number. Increasing Mach numbers have a destabilizing effect for wide gaps, and a stabilizing effect for narrow gaps. For a sufficiently fast, counter-rotating outer cylinder, the primary instability becomes a three-dimensional traveling wave. Compressibility has a stabilizing effect on these modes regardless of the gap width; also, heating at the outer cylinder stabilizes the flow. Bicritical points for the primary instability corresponding to the crossover of the azimuthal wave numbers are determined for cylinders counter-rotating with equal angular speed.

Hatay, Ferhat F.↗
NASA NTRS1986

The acoustic field of a point source in a uniform boundary layer over an impedance plane

The acoustic field of a point source in a boundary layer above an impedance plane is investigated anatytically using Obukhov quasi-potential functions, extending the normal-mode theory of Chunchuzov (1984) to account for the effects of finite ground-plane impedance and source height. The solution is found to be asymptotic to the surface-wave term studies by Wenzel (1974) in the limit of vanishing wind speed, suggesting that normal-mode theory can be used to model the effects of an atmospheric boundary layer on infrasonic sound radiation. Model predictions are derived for noise-generation data obtained by Willshire (1985) at the Medicine Bow wind-turbine facility. Long-range downwind propagation is found to behave as a cylindrical wave, with attention proportional to the wind speed, the boundary-layer displacement thickness, the real part of the ground admittance, and the square of the frequency.

Zorumski, W. E.↗
NASA NTRS1986

Aircraft Noise Prediction Program theoretical manual: Propeller aerodynamics and noise

The prediction sequence used in the aircraft noise prediction program (ANOPP) is described. The elements of the sequence are called program modules. The first group of modules analyzes the propeller geometry, the aerodynamics, including both potential and boundary-layer flow, the propeller performance, and the surface loading distribution. This group of modules is based entirely on aerodynamic strip theory. The next group of modules deals with the first group. Predictions of periodic thickness and loading noise are determined with time-domain methods. Broadband noise is predicted by a semiempirical method. Near-field predictions of fuselage surface pressrues include the effects of boundary layer refraction and scattering. Far-field predictions include atmospheric and ground effects.

Zorumski, W. E.↗
NASA NTRS1983

Propeller noise prediction

Analytic propeller noise prediction involves a sequence of computations culminating in the application of acoustic equations. The prediction sequence currently used by NASA in its ANOPP (aircraft noise prediction) program is described. The elements of the sequence are called program modules. The first group of modules analyzes the propeller geometry, the aerodynamics, including both potential and boundary layer flow, the propeller performance, and the surface loading distribution. This group of modules is based entirely on aerodynamic strip theory. The next group of modules deals with the actual noise prediction, based on data from the first group. Deterministic predictions of periodic thickness and loading noise are made using Farassat's time-domain methods. Broadband noise is predicted by the semi-empirical Schlinker-Amiet method. Near-field predictions of fuselage surface pressures include the effects of boundary layer refraction and (for a cylinder) scattering. Far-field predictions include atmospheric and ground effects. Experimental data from subsonic and transonic propellers are compared and NASA's future direction is propeller noise technology development are indicated.

Zorumski, W. E.↗
NASA NTRS1982

Empirical source noise prediction method with application to subsonic coaxial jet mixing noise

A general empirical method, developed for source noise predictions, uses tensor splines to represent the dependence of the acoustic field on frequency and direction and Taylor's series to represent the dependence on source state parameters. The method is applied to prediction of mixing noise from subsonic circular and coaxial jets. A noise data base of 1/3-octave-band sound pressure levels (SPL's) from 540 tests was gathered from three countries: United States, United Kingdom, and France. The SPL's depend on seven variables: frequency, polar direction angle, and five source state parameters: inner and outer nozzle pressure ratios, inner and outer stream total temperatures, and nozzle area ratio. A least-squares seven-dimensional curve fit defines a table of constants which is used for the prediction method. The resulting prediction has a mean error of 0 dB and a standard deviation of 1.2 dB. The prediction method is used to search for a coaxial jet which has the greatest coaxial noise benefit as compared with an equivalent single jet. It is found that benefits of about 6 dB are possible.

Zorumski, W. E.↗
NASA NTRS1982

Rotorcraft noise prediction

The purpose of this presentation is to give a general strategy for rotorcraft noise prediction. This strategy is expressed through a modular software system design rather than theoretical analysis of the aerocoustic phenomena. The crucial design choices in a software system design are the module interface definitions. An interface is the data that are passed from one module to another. A module takes data from one (input) interface and transforms it, through a prediction method, to another (output) interface. In system design, the method is less important than the interface. The two types of methods available may be braodly classified as empirical or analytical, although no method is purely one or the other. These two general approaches will be compared as they apply to rotorcraft noise prediction.

Zorumski, W. E.↗
NASA NTRS1982

Aircraft noise prediction program theoretical manual, part 1

Aircraft noise prediction theoretical methods are given. The prediction of data which affect noise generation and propagation is addressed. These data include the aircraft flight dynamics, the source noise parameters, and the propagation effects.

Zorumski, W. E.↗
NASA NTRS1982

Aircraft noise prediction program theoretical manual, part 2

Detailed prediction methods for specific aircraft noise sources are given. These sources are airframe noise, combustion noise, fan noise, single and dual stream jet noise, and turbine noise. Modifications to the NASA methods which comply with the International Civil Aviation Organization standard method for aircraft noise prediction are given.

Zorumski, W. E.↗
NASA NTRS1981

NASA progress in aircraft noise prediction

Some of the essential features of aircraft noise prediction are described and the basis for evaluating its capability and future potential is discussed. A takeoff noise optimizing procedure is described which calculates a minimum noise takeoff procedure subject to multiple site noise constraints.

Raney, J. P.↗
NASA NTRS1981

NASA progress in aircraft noise prediction

Langley Research Center efforts to develop a methodology for predicting the effective perceived noise level (EPNL) produced by jet-powered CTOL aircraft to an accuracy of + or - 1.5 dB are summarized with emphasis on the aircraft noise prediction program (ANOPP) which contains a complete set of prediction methods for CTOL aircraft including propulsion system noise sources, aerodynamic or airframe noise sources, forward speed effects, a layered atmospheric model with molecular absorption, ground impedance effects including excess ground attenuation, and a received noise contouring capability. The present state of ANOPP is described and its accuracy and applicability to the preliminary aircraft design process is assessed. Areas are indicated where further theoretical and experimental research on noise prediction are needed. Topics covered include the elements of the noise prediction problem which are incorporated in ANOPP, results of comparisons of ANOPP calculations with measured noise levels, and progress toward treating noise as a design constraint in aircraft system studies.

Raney, J. P.↗
NASA NTRS1978

Prediction of aircraft sideline noise attenuation

A computational study is made using the recommended ground effect theory by Pao, Wenzel, and Oncley. It is shown that this theory adequately predicts the measured ground attenuation data by Parkin and Scholes, which is the only available large data set. It is also shown, however, that the ground effect theory does not predict the measured lateral attenuations from actual aircraft flyovers. There remain one or more important lateral effects on aircraft noise, such as sideline shielding of sources, which must be incorporated in the prediction methods. Experiments at low elevation angles (0 deg to 10 deg) and low-to-intermediate frequencies are recommended to further validate the ground effect theory.

Zorumski, W. E.↗
NASA NTRS1977

Aircraft flyover noise prediction

A review is conducted of the prediction techniques for CTOL aircraft noise sources which are presently implemented in the NASA Aircraft Noise Prediction Program (ANOPP). The sources considered include jet noise, fan noise, combination noise, and airframe noise. Questions related to propagation prediction methods, source shielding, atmospheric attenuation, and ground attenuation are also described. It is pointed out that ANOPP is designed to make predictions of varying degrees of complexity, or amounts of detail, depending on the needs of the user. These different degrees of complexity are called levels of prediction. The prediction methods being used imply a similarity law for aircraft noise. Propulsion noise is proportional to mass flow for a selected engine cycle and, since thrust is also proportional to mass flow, aircraft with a fixed thrust-to-weight ratio will have their propulsion noise proportional to weight.

Zorumski, W. E.↗
NASA NTRS1976

Prediction of the acoustic impedance of duct liners

Recent research which contributes to the prediction of the acoustic impedance of duct liners is reviewed. This review includes the linear and nonlinear properties of sheet and bulk type materials and methods for the measurement of these properties. It also includes the effect of grazing flow on the acoustic properties of materials. Methods for predicting the properties of single or multilayered, point reacting or extended reaction, and flat or curved liners are discussed. Based on this review, methods for predicting the properties of the duct liners which are typically used in aircraft engines are recommended. Some areas of needed research are discussed briefly.

Zorumski, W. E.↗
NASA NTRS1975

Noise suppressor

Suppressor reduces noise propagated through ducts. It provides high attenuation in given duct length. Entire device forms acoustic trap which utilizes reflective elements on ends to direct sound energy into sound-dissipating element in center. Device achieves large suppression by utilizing interactive effects of different suppression devices.

Zorumski, W. E.↗
NASA NTRS1974

Unified analysis of ducted turbomachinery noise

The methodologies of Hanson and Zorumski are combined to yield a unified analysis of ducted turbomachinery noise. It is shown that the far-field broad-band and discrete noise spectral components can be expressed in terms of modal cross-spectral matrices and directivity vectors which are derivable from the duct analysis.

Zorumski, W. E.↗
NASA NTRS1974

Unified analysis of ducted turbomachinery noise

An approach for an analysis of ducted turbomachinery noise is developed by combining features of the analysis of fan stator noise reported by Hanson (1973) with results obtained by Zorumski (1974). Hanson's analysis is briefly examined and a formula is derived for the far-field pressure due to a dipole pulse. Questions of transmission and reflection are discussed and attention is given to the radiation from ducted dipoles.

Zorumski, W. E.↗