Engineering Papers⌕ Search

Engineering topics

Zoby, E. V.

Publications and source records attributed to Zoby, E. V..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Shuttle Infrared Leeside Temperature Sensing (SILTS) experiment - STS-35 and STS-40 preliminary results

Preliminary results from the STS-35 and STS-40 flight of the Shuttle Infrared Leeside Temperature Sensing (SILTS) experiment aboard the Shuttle Orbiter Columbia are presented. Infrared images are shown in false-color indicating the level and distribution of surface temperature over the vehicle's leeside fuselage during entry. Features evident in the imagery are related to their causative aerodynamic flow phenomena. Quantitative comparisons of the infrared image data with in situ temperature measurements obtained with thermocouples located at the aerodynamic surface of the thermal protection materials are presented.

Throckmorton, David A.↗
NASA NTRS1991

Effect of nose shape on three-dimensional stagnation region streamlines and heating rates

A new method for calculating the three-dimensional inviscid surface streamlines and streamline metrics using Cartesian coordinates and time as the independent variable of integration has been developed. The technique calculates the streamline from a specified point on the body to a point near the stagnation point by using a prescribed pressure distribution in the Euler equations. The differential equations, which are singular at the stagnation point, are of the two point boundary value problem type. Laminar heating rates are calculated using the axisymmetric analog concept for three-dimensional boundary layers and approximate solutions to the axisymmetric boundary layer equations. Results for elliptic conic forebody geometries show that location of the point of maximum heating depends on the type of conic in the plane of symmetry and the angle of attack, and that this location is in general different from the stagnation point. The new method was found to give smooth predictions of heat transfer in the nose region where previous methods gave oscillatory results.

Hassan, Basil↗
NASA NTRS1991

Hypersonic nonequilibrium viscous solutions over slender bodies

An extension is undertaken of a previous numerical study in order to improve current understanding of nonequilibrium flow effects over slender bodies. Upon extension of the parametric study to encompass smaller nose radii, the downstream influence of equilibrium nonequilibrium flow is found to be much smaller than for the larger nose radii. A comparison of individual stagnation nonequilibrium heating rates demonstrates that a relative comparison of the ratios was not indicative of the actual heating reduction.

Zoby, E. V.↗
NASA NTRS1988

Viscous shock-layer solutions with nonequilibrium chemistry for hypersonic flows past slender bodies

Laminar nonequilibrium heat transfer to slender vehicles is discussed, with heating-rate results presented as a ratio of the noncatalytic to the corresponding fully catalytic value to illustrate the maximum potential for a heating reduction in dissociated nonequilibrium flow at a given flight condition. Larger blunted cone half-angles are shown to produce the most significant nonequilibrium effects at distances beyond 100 nose radii, except in the fore-cone region. Increasing nose bluntness is found to produce large reductions in the ratio for the smaller cone angles at relatively large downstream surface lengths. It is noted that the nose radius and freestream density are not independent scaling parameters in nonequilibrium flow.

Zoby, E. V.↗
NASA NTRS1988

Viscous shock-layer solutions for the low-density hypersonic flow past long slender bodies

Results are obtained for the surface pressure, drag, heat-transfer, and skin-friction coefficients for hyperboloids and sphere cones. Body half angles from 5 to 22.5 degrees are considered for various low-density flow conditions. Recently obtained surface-slip and shock-slip equations are employed to account for the low-density effects. The method of solution employed for the viscous shock-layer (VSL) equations is a partially coupled spatial-marching implicit finite-difference technique. The flow cases analyzed include highly cooled long slender bodies in high Mach number flows. The present perfect-gas VSL calculations compare quite well with available experimental data. Results have also been obtained from the steady-state Navier-Stokes (NS) equations by successive approximations. Comparison between the NS and VSL results indicates that VSL equations even with body and shock-slip boundary conditions may not be adequate in the stagnation region at altitudes greater than about 75 km for the cases analyzed here.

Gupta, R. N.↗
NASA NTRS1987

Viscous shock-layer analysis of hypersonic flows over long slender bodies

Numerical solutions from the time-steady viscous shock-layer equations are presented for the hypersonic laminar and turbulent flow of a perfect gas over long slender bodies. These results are obtained from a spatial-marching implicit finite-difference technique. Detailed comparisons have been made with other predictions and experimental data to assess the accuracy of the present numerical technique, especially for slender-body flows. Results from the present method show that coupling the normal momentum and continuity equations and the use of the Vigneron pressure condition in the subsonic nose region give quite accurate and stable results. These results compare (with some exceptions) favorably with those obtained using PNS and other VSL methods.

Gupta, R. N.↗
NASA NTRS1987

An aerothermodynamic study of slender conical vehicles

A numerical study was performed to assess the applicability of some current techniques which can be used for aerothermal predictions over slender spherically blunted cones. Predictions using a viscous-shock-layer method and several engineering approaches were compared with experimental results from flight and ground-based tests, with each other, and with other detailed results. Good agreement was obtained in comparisons with laminar and turbulent heating data from the Reentry F flight vehicle and with the wind-tunnel data. In particular, the viscous-shock-layer method was shown to yield excellent comparisons and should be useful in providing detailed flowfield and surface values for slender blunted cones. Additional predictions were obtained with these methods for two 5-deg half-angle cones with different nose radii to illustrate the effects of nose bluntness and angle of attack on drag and heat transfer. These results demonstrate the benefit of nose blunting with respect to heating and drag for laminar and transitional flow at zero-lift conditions and the benefit of heating reduction at angle of attack. Detailed comparison of the engineering code predictions with the viscous-shock-layer results for these additional cases generally showed good agreement except for the laminar prodictions at angle of attack on the forward cone surface. Nonequilibrium calculations at 0-deg angle of attack showed that substantial benefits of low surface catalysis existed only in the nose-dominated region.

Thompson, R. A.↗
NASA NTRS1985

The Shuttle Infrared Leeside Temperature Sensing (SILTS) experiment

The Shuttle Infrared Leeside Temperature Sensing (SILTS) experiment is described. The SILTS experiment will obtain high-spatial-resolution measurements of the temperatures of Shuttle orbiter leeside surfaces during atmospheric entry. The data will be obtained by means of an imaging, infrared radiometer, located atop the orbiter's vertical tail, which will view the orbiter fuselage and left wing. Implementation of the SILTS experiment required a significant change to the configuration of the orbiter's vertical tail fintip. The orbiter Columbia has been modified to carry the SILTS experiment which will be active on Columbia's next flight, currently scheduled for mid-1985.

Throckmorton, D. A.↗
NASA NTRS1984

Temperature-dependent reaction-rate expression for oxygen recombination at Shuttle entry conditions

A temperature-dependent oxygen surface reaction-rate coefficient has been determined from experimental STS-2 heating and wall temperature data at altitudes of 77.91 km, 74.98 km, and 71.29 km. The coefficient is presented in an Arrhenius form and is shown to be less temperature dependent than previous results. Finite-rate viscous-shock-layer heating rates based on this present expression have been compared with predicted heating rates using the previous rate coefficients and with experimental heating data obtained over an extensive range of STS-2 and STS-3 entry conditions. A substantial improvement is obtained in comparison of experimental data and predicted heating rates using the present oxygen reaction-rate expression.

Zoby, E. V.↗
NASA NTRS1984

Engineering flowfield method with angle-of-attack applications

An approximate inviscid flowfield method has been extended to include heat-transfer predictions using a technique to account for variable-entropy edge conditions. The engineering code computes the flowfield over hyperboloids, ellipsoids, paraboloids, and sphere cones at 0 deg angle of attack (AOA). For angle-of-attack applications, an approximation to sphere-cone streamline-spreading effects on the heat transfer along the windward and leeward rays and an empirical circumferential heating technique have been incorporated also in the method. The present engineering calculations yield good comparisons with existing pressure and heating data over sphere cones even at high incidence values with the restriction that the sonic-line location remain on the spherical cap.

Zoby, E. V.↗