Engineering Papers⌕ Search

Engineering topics

Zinkle, Steven J

Publications and source records attributed to Zinkle, Steven J.

24 records · Page 2

Advances in Microstructural Characterization

Timely development of materials for the demanding fusion energy environment requires a broad range of advanced scientific tools, including advanced structural characterization methods. The current state-of-the-art and emerging capabilities in electron microscopy, atom probe tomography, neutron scattering and X-ray scattering are reviewed with respect to potential applications in fusion materials research and development. Recent dramatic advances in capabilities in all four of these characterization tools are transforming the spatial precision and quantitative information that can be extracted during structural characterization. Examples include spectroscopic identification of single atoms in bulk materials, three-dimensional mapping of millimeter-scale volumes of materials with nanometer resolution, and high-resolution in-situ measurements of internal stress and strain during mechanical testing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nb-base FS-85 Alloy as a Candidate Structural Material for Space Reactor Applications: Effects of Thermal Aging

The proposed use of fission reactors for manned or deep space missions have typically relied on the potential use of refractory metal alloys as structural materials. Throughout the history of these programs, the lead candidate has been Nb-1Zr due to its good fabrication and welding characteristics. However, the less than optimal creep resistance of this alloy has encouraged interest in the more complex FS-85 (Nb-28Ta-10W-1Zr) alloy. Despite this interest, a relatively small database exists for the properties of FS-85. These gaps include potential microstructural instabilities that can lead to mechanical property degradation. In this work, changes in microstructure and mechanical properties of FS-85 were investigated following 1100 h of thermal aging at 1098, 1248 and 1398 K. The changes in electrical resistivity, hardness and tensile properties between the as-annealed and aged materials are compared. Evaluation of the microstructural changes was performed through optical, scanning and transmission electron microscopy. The development of intragranular and grain boundary precipitation of Zr-rich compounds as a function of aging temperature was followed. Brittle tensile behavior was measured in the 1248 K aged material, while ductile behavior occurred in material aged above and below this temperature. The effect of temperature on the under and overaging of the grain boundary particles are believed to have contributed to the mechanical property behavior of the aged material.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Structural Materials for Fission and Fusion Energy

Structural materials represent the key for containment of nuclear fuel and fission products as well as reliable and thermodynamically efficient production of electrical energy from nuclear reactors. Similarly, high-performance structural materials will be critical for the future success of proposed fusion energy reactors, which will subject the structures to unprecedented fluxes of high-energy neutrons along with intense thermomechanical stresses. Advanced materials can enable improved reactor performance via increased safety margins and design flexibility, in particular by providing increased strength, thermal creep resistance and superior corrosion and neutron radiation damage resistance. In many cases, a key strategy for designing highperformance radiation-resistant materials is based on the introduction of a high, uniform density of nanoscale particles that simultaneously provide good high temperature strength and neutron radiation damage resistance.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Advances in Microstructural Characterization

Timely development of materials for the demanding fusion energy environment requires a broad range of advanced scientific tools, including advanced structural characterization methods. The current state-of-the-art and emerging capabilities in electron microscopy, atom probe tomography, neutron scattering and X-ray scattering are reviewed with respect to potential applications in fusion materials research and development. Recent dramatic advances in capabilities in all four of these characterization tools are transforming the spatial precision and quantitative information that can be extracted during structural characterization. Examples include spectroscopic identification of single atoms in bulk materials, three-dimensional mapping of millimeter-scale volumes of materials with nanometer resolution, and high-resolution in situ measurements of internal stress and strain during mechanical testing.

Zinkle, Steven J↗

Tensile and Fracture Toughness Properties of Neutron-Irradiated CuCrZr

Tensile and fracture toughness properties of a precipitation-hardened CuCrZr alloy were investigated in two heat treatment conditions: solutionized, water quenched and aged (CuCrZr SAA), and hot isostatic pressed, solutionized, slow-cooled and aged (CuCrZr SCA). The second heat treatment simulated the manufacturing cycle for large components, and is directly relevant for the ITER divertor components. Specimens were neutron irradiated at {approx}80 C to two fluences, 2 x 10{sup 24} and 2 x 10{sup 25} n/m{sup 2} (E > 0.1 MeV), corresponding to displacement doses of 0.15 and 1.5 displacements per atom (dpa). Tensile and fracture toughness tests were carried out at room temperature. Significant irradiation hardening and plastic instability at yield occurred in both heat treatment conditions with a saturation dose of {approx}0.1 dpa. Neutron irradiation slightly reduced fracture toughness in CuCrZr SAA and CuCrZr SCA. The fracture toughness of CuCrZr remained high up to 1.5 dpa (J{sub Q} > 200 kJ/m{sup 2}) for both heat treatment conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of advanced blanket performance under irradiation and system integration through JUPITER-II project

This report describes an outline of the activities of the JUPITER-II collaboration (japan-USA program of Irradiation/Integration test for Fusion Research-II), Which has bee carried out through six years (2001-2006) under Phase 4 of the collabroation implemented by Amendment 4 of Annex 1 to the DOE (United States Department of Energy)-MEXT (Ministry of Education ,Culture,Sports,Science and Technology) Cooperation. This program followed the RTNS-II Program (Phase1:1982-4986), the FFTF/MOTA Program (Phase2:1987-1994) and the JUPITER Program (Phase 3: 1995-2000) [1].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗