Engineering topics
Publications and source records attributed to Zimbelman, J. R..
Paleoflood deposits in central Australia represent a new model for possible fluvial deposits on Mars. The distinct Australian assemblage of landforms and sediments is used to identify potential unconfined paleoflood deposits in Mars Orbiter Camera (MOC) images of Mars. Additional information is contained in the original extended abstract.
Fluvial processes have been active during a large portion of Martian history, as evidenced by a variety of erosional features, ranging from concentrations of small channels to scour features generated by floods that affected enormous areas on Mars. Most research efforts prior to Mars Global Surveyor (MGS) focused on channelized reaches since these were some of the most convincing fluvial features on the planet. Since MGS reached its planned mapping orbit in 1999, a new era of Mars exploration has been opened. The m-scale resolution of the Mars Orbiter Camera (MOC), the precise elevation measurements of the Mars Orbiter Laser Altimeter (MOLA), and the compositional constraints derived from the Thermal Emission Spectrometer (TES) allows one now to search for deposits as well as erosional landforms. Here we describe our initial efforts at a search for deposits on Mars where flow was no longer confined within a topographic channel. We are using both new MGS and existing Viking data, in conjunction with field results of fluvial deposits in unconfined reaches from central Australia and elsewhere as analogues for the deposit characteristics to search for on Mars. Additional information is contained in the original extended abstract.
An inventory of geomorphic signatures from terrestrial paleofloods enable the detection of similar features along unconfined flood channels on Mars.
The northern plains of Mars have many morphologic characteristics that are uncommon or absent on the rest of the planet. Mariner 9 and Viking images obtained north of latitude 30 deg N revealed 'smooth' and 'mottled' plains of an uncertain origin. Some or all of the northern plains were interpreted to consist of lava plains intermixed with eolian and volcanic materials thick eolian mantles that buried portions of the mid latitudes periglacial deposits resulting from the presence of ground ice and as water-transported sediments derived from fluvial runoff, lacustrine deposition in standing bodies of water, or glacial runoff. The highest-resolution Viking images show many intriguing details that may provide clues to the origin of this complex and distinctive terrain. Some of the informative features present in the best Viking images, comparing the observations to what may be expected from various hypotheses of formation, are reviewed. While the results are not conclusive for any single hypothesis, eolian processes have played a major role in the erosion (and possibly deposition) of the materials that make up the surface exposures in the Martian northern plains.
Geologic mapping from Viking image data of the Martian volcano Apollinaris Patera allowed identification of 6 major events that shaped its current morphology. Derivation of new topographic data allowed accurate estimates of the volume of erupted products from which estimates of an eruption duration are presented for the edifice and its corresponding atmospheric water contribution. Topographic data were acquired using stereophotogrammetric (Viking picnos 603A42, 639A92) techniques in both profiling and contouring modes (1 km contour). The profiling mode results in a more precise measurement than the contouring mode, but is limited in its areal coverage. The contour data are used in a more general sense to provide synoptic coverage for the volcano. These new stereophotogrammetric measurements constrain the topography to an accuracy of approximately 800 m vertically and approximately 1000 m horizontally. Conversion of the derived contour map to a raster based digital elevation model (DEM) was done by a growing contours interpolation. An ambiguity arises in this volume calculation due to an uncertainty regarding the actual base of the volcano relative to the pre-existing topography. Thus, the volume estimate was bracketed by using the 100 m and the 750 m elevations, which generally correspond to the lower and upper portions of the circumferential basal scarp, respectively. The resulting volumes are 103,000 cu km and 97,000 cu km; therefore the total volume of Apollinaris Patera is estimated to be approximately 100,000 cu km.
Arcuate and circular structures are evident in the Tharsis region of Mars. They involve concentric graben and fracture systems and are often associated with volcanic centers. The most prominent example is Alba Patera, a low relief volcanotectonic center. It is surrounded by a graben system comprised of the Alba and Tantalus Fossae and part of the Ceranius Fossae system that are thought to have formed during the Early Amazonian. The graben concentric to Alba Patera form an annulus that is 600 km in diameter. The similarity between Alba Patera and coronae on Venus was observed prior to the Magellan mission. Magellan imagery of Venusian coronae has revealed a number of striking similarities between these structures, Alba Patera, and the other circular structures on Mars. Coronae on Venus are circular to ovoidal volcanotectonic features that range in diameter from 60 to over 1000 km. Concentric graben form partial to complete tectonic annuli. More regionally extensive graben systems are deflected toward, and in many cases merge with, the concentric graben. Volcanic flows and domes dominate the surface enclosed within the concentric graben. However, distinctive differences exist between coronae on Venus and the structures on Mars. Circular structures on Mars lack radial graben crosscut by concentric graben. There is also no evidence of the complex topography associated with coronae on Venus. The differences between coronae on Venus and the suspected coronae on Mars may be largely due to the difference in the thickness of the elastic lithosphere on the two planets. The topographic expression of the interaction between the diapir and the lithosphere would be expected to be greatly subdued on Mars because of the large difference in lithospheric thickness. The lack of circular structures with diameters below 200 km suggests a lower limit to the size that coronae could form on Mars.
A number of possible morphologic indicators of ground ice on Mars are discussed, with emphasis on rampart craters and terrain softening. Geologic evidence indicates that the Martian surface has been substantially modified by the action of liquid water, and that much of that water still resides beneath the surface as ground ice. Calculations of the thermodynamic stability of ground ice on Mars suggest that it can exist very close to the surface at high latitudes, but can persist only at substantial depths near the equator. A variety of observed Martian landforms can be attributed to creep of the Martian regolith abetted by deformation of ground ice. Global mapping of creep features also supports the idea that ice is present in near-surface materials at latitudes higher than +/- 30 deg, and suggests that ice is largely absent from such materials at lower latitudes.
Estimates of the amount of probable bedrock exposures visible in the highest-resolution Viking imaging data for a selected region of the Martian surface are presented. The study region includes portions of the classical low-albedo regions of Sinus Meridiani and Sinus Sabaeus and the high-albedo region of Arabia, and is completely within the cratered highlands of Mars. More than 400 images were used to estimate the percentage of the area of each frame having locally steep slopes. It is seen that 42 percent of the high-resolution frames have less than one percent probable bedrock exposure while three percent of the frames have 15 percent probable bedrock exposure.
This work documents the distinctive characteristics of two locations near the southeastern margin of the Tharsis low thermal inertia region on Mars that support the inferred south-to-north migration of dust deposits under present climatic conditions (Christensen, 1986, 1988). Low thermal inertia and high albedo indicate the presence of fine-grained surface materials on the highly fractured terrain of northern Claritas Fossae with a narrow zone of fine material connecting this location to the southern margin of the Tharsis low thermal inertia region. A similar deposit occurs in Sinai Planum on an isolated exposure of fractured terrain. In comparison to their surroundings, both locations have higher visual albedo, lower thermal inertia, and higher topographic relief coupled with lower reflectivity and higher roughness at radar wavelengths.
Concentric crater fill, a distinctive martian landform represented by a concentric pattern of surface undulations confined within a crater rim, has been interpreted as an example of ice-enhanced regolith creep at midlatitudes (e.g., Squyres and Carr, 1986). Theoretical constraints on the stability and mobility of ground ice limit the applicability of an ice-rich soil in effectively mobilizing downslope movement at latitudes poleward of + or - 30 deg, where concentric crater fill is observed. High-resolution images of concentric crater fill material in the Utopia Planitia region (45 deg N, 271 deg W) show it to be an eroded, multiple-layer deposit. Layering should not be preserved if the crater fill material moved by slow deformation throughout its thickness, as envisioned in the ice-enhanced creep model. Multiple layers are also exposed in the plains material surrounding the craters, indicating a recurrent depositional process that was at least regional in extent. Mantling layers are observed in high-resolution images of many other locations around Mars, suggesting that deposition occurred on a global scale and was not limited to the Utopia Planitia region. It is suggested that an aeolian interpretation for the origin and modification of concentric crater fill material is most consistent with morphologic and theoretical constraints.
A new model for the evolution of the martian volcano Alba Patera is constructed. Numerous digitate channel networks on the flanks of the volcano are interpreted to be carved by sapping due to the release of nonjuvenile water from unconsolidated flank deposits. The particle size of these deposits is estimated to be 3-10 microns, which, together with theoretical modelling of the disperison of explosively derived volcanic materials, leads to the conclusion that the flank deposits on Alba Patera are low-relief pyroclastic flows. The recognition of numerous late-stage summit and subterminal lava flows thus makes Alba Patera a unique martian volcano that is transitional between the older pyroclastic-dominated highland paterae and the more recent effusive central-vent volcanoes such as the Tharsis Montes.
Thermal inertia characteristics have been determined for the martian crater Curie from high resolution groundtracks of Viking Thermal Infrared Mapper (IRTM) data. Flow features near the southeastern edge of the ejecta indicate that at least part of the Curie ejecta was emplaced in a manner similar to the ejecta of rampart craters. Within the study region there appears to be a general southeastern trend towards lower thermal inertia values. This trend may be related to the proximity of the Arabia region, which is mainly to the south and east of Curie. Curie is in a region where the overall thermal inertias change over relatively short distances radial to Arabia. Therefore, the observed general decrease in thermal inertia may represent increasing regional dust accumulation in the direction of Arabia.
Topics addressed include: SNC meteorites and their potential for providing information about the geochemical evolution of Mars; remote sensing; photogeological inferences of Martian surface compositions; and interactions of the surface with volatiles in either the surface or the atmosphere.
Satellite imagery of the Pettit streak on Amazonis Planitia are discussed in terms of the details of wind streaks and their associated sediments. Increasingly more detailed blow-ups of the available imagery demonstrate that the Pettit streak holds both a Type I bright streak (at the crater rim) and a Type II dark streak beginning at the dark patch within the crater. The lowest albedos measured, 0.20-0.22, are associated with the highest thermal inertia, indicative of grain diameters similar to medium sand, i.e., ranging from 250-350 microns. The brightest portions of the streak have albedos over 0.26 and a low thermal inertia, in the range 3-4, which implies the presence of fine-grained sand, diameters from 50-100 microns. The particle grains are less than 50 microns diameter in the surrounding plains, which have an approximately uniform albedo (0.27) and a thermal inertia of 2.5, characteristics typical of silt or clay. Current streak models describe the dark streak well, but do not account for the bright streak, which may be optically thick patches of very fine dust.
Morphological measurements on six well-defined volcanic flows near the summit of the Martian volcano Ascraeus Mons were used to calculate the yield strength and viscosity of the lavas. The results are similar to values obtained for flows on other Martian and terrestrial shield volcanoes. Calculated viscosities are generally higher than measured viscosities for basaltic lavas but considerably smaller than rhyolite or dacite viscosities. The estimated rheologic properties of the Martian flows are most consistent with basaltic or basaltic andesite lavas, but some individual flows could consist of more evolved lavas.
High spatial resolution data from the Viking infrared thermal mapper (IRTM) are used to examine the Tharsis volcanoes which are situated within a vast area of low thermal inertia material very fine particle size or very high porosity, with the volcanoes having the lowest thermal inertias. Thermal infrared images of the 1823 flow on Kilauea's southwest rift zone show lower thermal inertias near the vent area where shelly pahoehoe is common while individual channelized aa flows with abundant broken pahoehoe slabs are higher thermal inertia. The increase in aa flows to the southeast leads to a general trend of increasing thermal inertias from near vent to distal areas. Martian shield volcanoes have thermal inertias equal to or higher than their surrounding plans when atmospheric effects are removed from the data. The general increase in thermal inertias away from the summit calderas is consistent with the trend of the Hawaiian 1823 flow and may be related to changing lava properties away from the summit.
The radar discriminability of geolian features and their geological setting as imaged by the SIR-A experiment is examined. The Gran Desierto and Pincate volcanio field of Sonora, Mexico was used to analyze the radar characteristics of the interplay of aeolian features and volcano terrain. The area in the Gran Desierto covers 4000 sq. km. and contains sand dunes of several forms. The Pincate volcanio field covers more than 2.000 sq. km. and consists primarily of basaltic lavas. Margins of the field, especially on the western and northern sides, include several maar and maar-like craters; thus obtaining information on their radar characteristics for comparison with impact craters.
Viking high resolution IR data is used in an examination of the hilly and cratered material of Scott and Carr (1978), supposed to be the oldest extensively exposed surface on Mars. Measured nighttime temperatures at 11 and 20 microns indicate inertia blocks, surrounded by lower thermal inertia soil. Geologic features crossed by the Viking data generally show no difference from the regional properties. Imaging data from within and around the Arabia low thermal inertia region indicate that subdued surface morphology is not always associated with low thermal inertias. The mantling of ancient northern hemisphere cratered terrain by fine grained material does not allow thermal measurements to be directly related to rock unit properties, but less mantling may be present in southern hemisphere locations of this material.