Engineering Papers⌕ Search

Engineering topics

Zhu, Shaofei

Publications and source records attributed to Zhu, Shaofei.

Determination of the spins and parities for the 0$^{+}_{4}$ and 0$^{+}_{5}$ states in 100 Zr

Here, two 0 + states at 1294.5 and 1774.0 keV, together with three 2 + and one 4 + levels, were identified or unambiguously spin-parity assigned for the first time in 100 Zr utilizing γ-ray spectroscopy and γ–γ angular correlation techniques with the Gammasphere spectrometer, following the β – decay of neutron-rich, mass-separated 100,100m Y isotopes. Comparisons with recent Monte Carlo shell-model calculations indicate that these two states are candidates for the bandhead of a sequence in a shape-coexisting spherical minimum predicted to be located around ≈1500 keV. According to the measured relative B(E2) relative transition probabilities, the 0$^+_5$ state exhibits decay properties which more closely align with those predicted for a spherical shape, while the 0$^+_4$ level is suggested to be associated with a weakly deformed shape similar to one related to the 0$^+_2$ state.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A=236

Experimental nuclear structure and decay data are evaluated for all of 10 known nuclides of mass 236 (Ac, Th, Pa, U, Np, Pu, Am, Cm, Bk, Cf). For each nuclide, detailed evaluated spectroscopic information is presented in each reaction and decay, and the best values combining all available data are recommended for level properties, γ and β radiations, and other spectroscopic properties in the Adopted Levels and Gammas. The present evaluation supersedes the earlier one on A=236 by E. Browne, J. K. Tuli (2006Br20), published in Nuclear Data Sheets 107, 2641 (2006).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A=214

Here, experimental nuclear structure and decay data are evaluated for all of 12 known nuclides of mass 214 (Hg, Tl, Pb, Bi, Po, At, Rn, Fr, Ra, Ac, Th, Pa). For each nuclide, detailed evaluated spectroscopic information is presented in each reaction and decay, and the best values combining all available data are recommended for level properties, γ and β radiations, and other spectroscopic properties in the Adopted Levels and Gammas. The present evaluation supersedes the earlier one on A=214 by S.-C. Wu (2009Wu02), published in Nuclear Data Sheets 110, 681 (2009).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Intrinsic electric quadrupole moment of the K π = 8 - isomeric state in Hf 178

The lifetime of the 9 - state in the rotational band based on the 4.0 s, K π = 8 - , isomeric state ( 178 Hf m 1 ) from the decay of the 31-yr isomer ( 178 Hf m 2 ) was determined to be 99(2) ps by means of the fast-timing technique using two LaBr 3 (Ce) scintillators. The δ (E2/M1) mixing ratios of the ΔI = 1 γ rays depopulating levels in this band were deduced from γ-γ angular correlations by using a 178 Hf m 2 radioactive source located at the center of the Gammasphere HPGe detector array. The new results, together with previous spectroscopic information, provide a different way to extract the intrinsic quadrupole moment of Q 0 = 6.45 (14) eb for the 178 Hf m 1 band. A possible explanation for the reduction of the 178 Hf m 1 nuclear charge radius is presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Pu-240 Target Preparation on Thin Backing Foils for GRETINA Experiments using ATLAS

Recent measurements of the octupole strength to the highest spin states in Pu-240 were performed using sub-barrier Coulomb excitation in order to unambiguously and convincingly demonstrate the existence of the rotational-aligned phonon condensation in this nucleus. The Pu-240 targets were prepared at the Center for Accelerator Target Science by molecular plating onto thin backing foils of C and Al. The required plutonium oxide dissolution, molecular plating methodology, plating results, and in-beam target performance will be discussed.

Actinides↗

Phase decomposition and bubble evolution in Xe implanted U 3 Si 2 at 450°C

We report on the microstructure investigations of a U 3 Si 2 specimen implanted by 84 MeV Xe ions at 450°C. In the region that corresponds to the highest irradiation dose, U 3 Si 2 was found to decompose into a Si-enriched nanocrystalline USi matrix phase and a U-enriched amorphous inclusion phase. Density functional theory (DFT) calculations were used to help understand the decomposition mechanism. Xe bubbles of different morphologies were observed in USi nano-grains, on USi grain boundaries, and phase boundaries. Original U 3 Si 2 micro-grains were preserved on both sides of the irradiation damage peak region within the sample, implying a radiation dose threshold for decomposition of approximately 150 dpa at 450°C. In the preserved U 3 Si 2 region beneath the irradiation damage peak, where critical amount of Xe ions were deposited, a monomodal size distribution of intragranular Xe bubbles with an average size of 2.68 nm formed. In both decomposed and preserved U 3 Si 2 , the size of Xe bubbles was found to be lower than 50 nm. Based on this observation, the fission gas behavior of U 3 Si 2 is controllable and free of run-away swelling despite the occurrence of decomposition at this irradiation temperature. (C) 2019 Elsevier B.V. All rights reserved.

36 MATERIALS SCIENCE↗

Interaction between Al and atomic layer deposited (ALD) ZrN under high-energy heavy ion irradiation

Uranium-molybdenum (U-Mo) particles dispersed in an aluminum matrix is the most promising candidate fuel to convert high-power research and test reactors in Europe from using high-enriched to using low-enriched fuel. However, chemical interaction between the U-Mo and the Al matrix leads to undesirable fuel behavior. Zirconium nitride (ZrN) is used as a diffusion barrier between the U-Mo fuel particles and the Al matrix. To understand the potential microstructural evolution of ZrN during irradiation, a high-energy heavy ion (84 MeV Xe) irradiation experiment was performed on atomic layer deposited (ALD) nanocrystalline ZrN deposited on an Al plate. A fluence of 1.86 x 10 17 ions/cm 2 , or 90.3 dpa was reached during this experiment. Both analytic transmission electron microscopy (TEM) and synchrotron microbeam X-ray diffraction (ARD) techniques were utilized to investigate the kinetics of radiation-induced grain growth of ZrN at various radiation doses based on the Williamson-Hall analyses. The grain growth kinetics can be described by a power law expression, D n - D$n\atop{0}$ = K phi, with n = 5.1. The Al-ZrN interaction products (Al 3 Zr and AIN) created by radiation-induced ballistic mixing/radiation-enhanced diffusion and their corresponding formation mechanism were determined from electron diffraction and elemental composition analysis. These experimental results were confirmed by first principle thermodynamic density functional theory (DFT) calculations. The results from this ion irradiation study were also compared to in-pile irradiation data from physical vapor deposited (PVD) ZrN samples for a comprehensive evaluation of the interaction between Al and ZrN and its influence on diffusion barrier performance.

36 MATERIALS SCIENCE↗

Nano-crystallization induced by high-energy heavy ion irradiation in UO 2

Here, advanced microstructure investigations of the high-burnup structure (HBS) in UO 2 produced by high-dose 84 MeV Xe ion irradiation are reported. Spark plasma sintered micro-grained UO 2 was irradiated to 1357 dpa at 350 degrees C. The characteristic nano-grains and micro-pores of the HBS were formed. The grain size and grain boundary misorientation distributions of the HBS were measured using transmission electron microscopy based orientation imaging microscopy. Grain polygonization due to accumulation of radiation-induced dislocations was found to be the mechanism of nano-crystallization. The morphology of Xe bubbles was quantitatively investigated. Finally, this study provides crucial references for advanced fuel performance modeling of high-burnup UO 2 .

36 MATERIALS SCIENCE↗

Bubble morphology in U 3 Si 2 implanted by high-energy Xe ions at 300 °C

The microstructure modifications of a high-energy Xe implanted U 3 Si 2 , a promising accident tolerant fuel candidate, were characterized and are reported upon. The U 3 Si 2 pellet was irradiated at Argonne Tandem Linac Accelerator System (ATLAS) by an 84 MeV Xe ion beam at 300 °C. The irradiated specimen was then investigated using a series of transmission electron microscopy (TEM) techniques. A dense distribution of bubbles were observed near the range of the 84 MeV Xe ions. Xe gas was also found to accumulate at multiple types of sinks, such as dislocations and grain boundaries. Bubbles aggregated at those sinks are slightly larger than intragranular bubbles in lattice. At 300 °C, the gaseous swelling strain is limited as all the bubbles are below 10 nm, implying the promising fission gas behavior of U 3 Si 2 under normal operating conditions in light water reactors (LWRs).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Toward superconducting critical current by design

The interaction of vortex matter with defects in applied superconductors directly determines their current carrying capacity. Defects range from chemically grown nanostructures and crystalline imperfections to the layered structure of the material itself. The vortex-defect interactions are non-additive in general, leading to complex dynamic behavior that has proven difficult to capture in analytical models. With recent rapid progress in computational powers, a new paradigm has emerged that aims at simulation assisted design of defect structures with predictable ‘critical-current-by-design’: analogous to the materials genome concept of predicting stable materials structures of interest. We demonstrate the feasibility of this paradigm by combining large-scale time-dependent Ginzburg-Landau numerical simulations with experiments on commercial high temperature superconductor (HTS) containing well-controlled correlated defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

MeV per Nucleon Ion Irradiation of Nuclear Materials with High Energy Synchrotron X-ray Characterization

The combination of MeV/Nucleon ion irradiation (e.g. 133 MeV Xe) and high energy synchrotron x-ray characterization (e.g. at the Argonne Advanced Photon Source, APS) provides a powerful characterization method to understand radiation effects and to rapidly screen materials for the nuclear reactor environment. Ions in this energy range penetrate ~10 μm into materials. Over this range, the physical interactions vary (electronic stopping, nuclear stopping and added interstitials). Spatially specific x-ray (and TEM and nanoindentation) analysis allow individual quantification of these various effects. Hard x-rays provide the penetration depth needed to analyze even nuclear fuels. Here, this combination of synchrotron x-ray and MeV/Nucleon ion irradiation is demonstrated on U-Mo fuels. A preliminary look at HT-9 steels is also presented. We suggest that a hard x-ray facility with in situ MeV/nucleon irradiation capability would substantially accelerate the rate of discovery for extreme materials.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Investigation of High-Energy Ion-Irradiated MA957 Using Synchrotron Radiation under In-Situ Tension

In this study, an MA957 oxide dispersion-strengthened (ODS) alloy was irradiated with high-energy ions in the Argonne Tandem Linac Accelerator System. Fe ions at an energy of 84 MeV bombarded MA957 tensile specimens, creating a damage region ~7.5 μm in depth; the peak damage (~40 dpa) was estimated to be at ~7 μm from the surface. Following the irradiation, in-situ high-energy X-ray diffraction measurements were performed at the Advanced Photon Source in order to study the dynamic deformation behavior of the specimens after ion irradiation damage. In-situ X-ray measurements taken during tensile testing of the ion-irradiated MA957 revealed a difference in loading behavior between the irradiated and un-irradiated regions of the specimen. At equivalent applied stresses, lower lattice strains were found in the radiation-damaged region than those in the un-irradiated region. This might be associated with a higher level of Type II stresses as a result of radiation hardening. The study has demonstrated the feasibility of combining high-energy ion radiation and high-energy synchrotron X-ray diffraction to study materials’ radiation damage in a dynamic manner.

36 MATERIALS SCIENCE↗