Engineering Papers⌕ Search

Engineering topics

Zhou, Yan

Publications and source records attributed to Zhou, Yan.

At least 145 records · Page 8

Mode coupling in spin torque oscillators

A number of recent experimental works have shown that the dynamics of a single spin torque oscillator can exhibit complex behavior that stems from interactions between two or more modes of the oscillator, such as observed mode-hopping or mode coexistence. There has been some initial work indicating how the theory for a single-mode (macro-spin) spin torque oscillator should be generalized to include several modes and the interactions between them. In the present work, we rigorously derive such a theory starting with the Landau–Lifshitz–Gilbert equation for magnetization dynamics by expanding up to third-order terms in deviation from equilibrium. Here, our results show how a linear mode coupling, which is necessary for observed mode-hopping to occur, arises through coupling to a magnon bath. In conclusion, the acquired temperature dependence of this coupling implies that the manifold of orbits and fixed points may shift with temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dual Functional Star Polymers for Lubricants

Star-shaped poly(alkyl methacrylate)s (PAMAs) with a 3-arm architecture were designed, prepared and their performance as a dual additive (viscosity index improver and friction modifier) for engine oils was evaluated. Furthermore, the structure-property relationships between macromolecular structure and lubricant performance were studied. Several co-polymers of dodecylmethacrylate with polar methacrylates in various amounts and various topologies, were synthesized as model compounds. Star polymers with a polar content of at least 10% effectively reduced the friction coefficient in both mixed and boundary lubrication regime only in block or tapered block topology. However, a polar content of 20% was efficient in reducing friction in both random and block topologies.

Cosimbescu, Lelia↗

Cadmium-induced neural tube defects and fetal growth restriction: Association with disturbance of placental folate transport

Previous studies found that maternal Cd exposure on gestational day (GD)9 caused forelimb ectrodactyly and tail deformity, the characteristic malformations. The aim of the present study was to investigate whether maternal Cd exposure on GD8 induces fetal neural tube defects (NTDs). Pregnant mice were intraperitoneally injected with CdCl{sub 2} (2.5 or 5.0 mg/kg) on GD8. Neither forelimb ectrodactyly nor tail deformity was observed in mice injected with CdCl{sub 2} on GD8. Instead, maternal Cd exposure on GD8 resulted in the incidence of NTDs. Moreover, maternal Cd exposure on GD8 resulted in fetal growth restriction. In addition, maternal Cd exposure on GD8 reduced placental weight and diameter. The internal space of maternal and fetal blood vessels in the labyrinth layer was decreased in the placentas of mice treated with CdCl{sub 2}. Additional experiment showed that placental PCFT protein and mRNA, a critical folate transporter, was persistently decreased when dams were injected with CdCl{sub 2} on GD8. Correspondingly, embryonic folate content was markedly decreased in mice injected with CdCl{sub 2} on GD8, whereas Cd had little effect on folate content in maternal serum. Taken together, these results suggest that maternal Cd exposure during organogenesis disturbs transport of folate from maternal circulation to the fetuses through down-regulating placental folate transporters. - Highlights: • Maternal Cd exposure during organogenesis causes NTDs and FGR. • Maternal Cd exposure during organogenesis impairs placental development. • Cd disturbs transport of folate by down-regulating placental folate transporters.

60 APPLIED LIFE SCIENCES↗

Multilevel sequential Monte Carlo samplers

Here, we study the approximation of expectations w.r.t. probability distributions associated to the solution of partial differential equations (PDEs); this scenario appears routinely in Bayesian inverse problems. In practice, one often has to solve the associated PDE numerically, using, for instance finite element methods and leading to a discretisation bias, with the step-size level h L . In addition, the expectation cannot be computed analytically and one often resorts to Monte Carlo methods. In the context of this problem, it is known that the introduction of the multilevel Monte Carlo (MLMC) method can reduce the amount of computational effort to estimate expectations, for a given level of error. This is achieved via a telescoping identity associated to a Monte Carlo approximation of a sequence of probability distributions with discretisation levels ${\infty}$ >h 0 >h 1 ...>h L . In many practical problems of interest, one cannot achieve an i.i.d. sampling of the associated sequence of probability distributions. A sequential Monte Carlo (SMC) version of the MLMC method is introduced to deal with this problem. In conclusion, it is shown that under appropriate assumptions, the attractive property of a reduction of the amount of computational effort to estimate expectations, for a given level of error, can be maintained within the SMC context.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Comparison of the Morphology Development of Polymer-Fullerene and Polymer-Polymer Solar Cells during Solution-Shearing Blade Coating

Here in this work, the detailed morphology studies of polymer poly(3-hexylthiophene-2,5-diyl) (P3HT):fullerene(PCBM) and polymer(P3HT):polymer naphthalene diimide thiophene (PNDIT) solar cell are presented to understand the challenge for getting high performance all-polymer solar cells. The in situ X-ray scattering and optical interferometry and ex situ hard and soft X-ray scattering and imaging techniques are used to characterize the bulk heterojunction (BHJ) ink during drying and in dried state. The crystallization of P3HT polymers in P3HT:PCBM bulk heterojunction shows very different behavior compared to that of P3HT:PNDIT BHJ due to different mobilities of P3HT in the donor:acceptor glass. Supplemented by the ex situ grazing incidence X-ray diffraction and soft X-ray scattering, PNDIT has a lower tendency to form a mixed phase with P3HT than PCBM, which may be the key to inhibit the donor polymer crystallization process, thus creating preferred small phase separation between the donor and acceptor polymer.

36 MATERIALS SCIENCE↗

CsPbBr{sub 3} nanocrystal saturable absorber for mode-locking ytterbium fiber laser

Cesium lead halide perovskite nanocrystals (CsPbX{sub 3}, X = Cl, Br, I) have been reported as efficient light-harvesting and light-emitting semiconductor materials, but their nonlinear optical properties have been seldom touched upon. In this paper, we prepare layered CsPbBr{sub 3} nanocrystal films and characterize their physical properties. Broadband linear absorption from ∼0.8 to over 2.2 μm and nonlinear optical absorption at the 1-μm wavelength region are measured. The CsPbBr{sub 3} saturable absorber (SA), manufactured by drop-casting of colloidal CsPbBr{sub 3} liquid solution on a gold mirror, shows modulation depth and saturation intensity of 13.1% and 10.7 MW/cm{sup 2}, respectively. With this SA, mode-locking operation of a polarization-maintained ytterbium fiber laser produces single pulses with duration of ∼216 ps, maximum average output power of 10.5 mW, and the laser spectrum is centered at ∼1076 nm. This work shows that CsPbBr{sub 3} films can be efficient SA candidates for fiber lasers and also have great potential to become broadband linear and nonlinear optical materials for photonics and optoelectronics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Implications of Successes and Failures of BEV-Focused Incentive Support for PEVs in the U.S., Canada and Europe

An international comparative analysis of causes of variation of PEV sales rates per capita in selected U.S. states, Canadian provinces, and European Nations is conducted. 2014-15 light-duty PEV registrations/sales by make and model are examined, drawing heavily on 2014 data for aggregate comparisons. States, provinces, and nations with PEV success, but with widely varying PEV purchase incentives and charging infrastructure installations are examined. The paper focuses particularly presence or absence of long daily distance charging options for PEVs. Four questions are addressed. (1) European evidence is that PHEV powertrains are a very marketable option for large family vehicles. For small BEVs BMW i3 sales patterns indicate that range extension beyond 120 km but less than 240 km via gasoline significantly increases market share. BEV inter-city functionality provided by aggressive installation of DC fast charging was critical to overall PEV success in Norway. Norway, like Northern Europe and Canada has a utility network that is winter peaking, which allows provision of peak summer BEV long-distance charging needs without difficulty. This is not the case for the U.S., which is summer peaking. The reviewed states, provinces, and nations vary considerably in seasonal peak temperature extremes. These climate differences have a significant bearing on the local viability of PHEVs vs. BEVs. The long distance DC fast charging infrastructure investments needed to support BEV market success are not as large when PHEVs are preferred by consumers.

Battery electric vehicle↗

Non‐Conjugated Flexible Linkers in Semiconducting Polymers: A Pathway to Improved Processability without Compromising Device Performance

Semiconducting polymers, in contrast to inorganic silicon, are solution processable and can potentially be printed cost efficiently on flexible large‐area substrates. However to do so it is of paramount importance to formulate the polymeric semiconductors into inks with specific viscosities. Herein, the synthesis of a new highly soluble isoindigo monomer and its incorporation into low bandgap semiconducting polymers is presented. Non‐conjugated flexible linkers are introduced into the conjugated backbone in order to modulate the materials processability. The viscoelastic properties of the new polymers are studied in detail by means of rheometry and dynamical mechanical analysis. The solution viscosity is directly proportional to the content of non‐conjugated linkers in the polymer backbone. In organic field‐effect transistors maximum hole mobilities of 1.7 cm 2 V −1 s −1 are achieved with the new polymers. Due to the enhanced solubility all‐polymer solar cells are fabricated by solution shearing, reaching power conversion efficiency values of 3.7%.

Schroeder, Bob C.↗

Evidence for ferromagnetic coupling at the doped topological insulator/ferrimagnetic insulator interface

One of the major obstacles of the magnetic topological insulators (TIs) impeding their practical use is the low Curie temperature (T{sub c}). Very recently, we have demonstrated the enhancement of the magnetic ordering in Cr-doped Bi{sub 2}Se{sub 3} by means of proximity to the high-T{sub c} ferrimagnetic insulator (FMI) Y{sub 3}Fe{sub 5}O{sub 12} and found a large and rapidly decreasing penetration depth of the proximity effect, suggestive of a different carrier propagation process near the TI surface. Here we further present a study of the interfacial magnetic interaction of this TI/FMI heterostrucutre. The synchrotron-based X-ray magnetic circular dichroism (XMCD) technique was used to probe the nature of the exchange coupling of the Bi{sub 2−x}Cr{sub x}Se{sub 3}/Y{sub 3}Fe{sub 5}O{sub 12} interface. We found that the Bi{sub 2−x}Cr{sub x}Se{sub 3} grown on Y{sub 3}Fe{sub 5}O{sub 12}(111) predominately contains Cr{sup 3+} cations, and the spin direction of the Cr{sup 3+} is aligned parallel to that of tetrahedral Fe{sup 3+} of the YIG, revealing a ferromagnetic exchange coupling between the Bi{sub 2−x}Cr{sub x}Se{sub 3} and the Y{sub 3}Fe{sub 5}O{sub 12}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plug-in Electric Vehicle Policy Effectiveness: Literature Review

The U.S. federal government first introduced incentives for plug-in electric vehicles (PEVs) through the American Clean Energy and Security Act of 2009, which provided a tax credit of up to $7,500 for a new PEV purchase. Soon after, in December 2010, two mass-market PEVs were introduced, the plug-in hybrid electric vehicle (PHEV) Chevrolet Volt and the battery electric vehicle (BEV) Nissan LEAF. Since that time, numerous additional types of PEV incentives have been provided by federal and regional (state or city) government agencies and utility companies. These incentives cover vehicle purchases as well as the purchase and installation of electric vehicle supply equipment (EVSE) through purchase rebates, tax credits, or discounted purchase taxes or registration fees. Additional incentives, such as free high-occupancy vehicle (HOV) lane access and parking benefits, may also be offered to PEV owners. Details about these incentives, such as the extent to which each type is offered by region, can be obtained from the U.S. Department of Energy (DOE) Alternative Fuel Data Center (http://www.afdc.energy.gov/). In addition to these incentives, other policies, such as zero-emission vehicle (ZEV) mandates,1 have also been implemented, and community-scale federal incentives, such as the DOE PEV Readiness Grants, have been awarded throughout the country to improve PEV market penetration. This report reviews 18 studies that analyze the impacts of past or current incentives and policies that were designed to support PEV adoption in the U.S. These studies were selected for review after a comprehensive survey of the literature and discussion with a number of experts in the field. The report summarizes the lessons learned and best practices from the experiences of these incentive programs to date, as well as the challenges they face and barriers that inhibit further market adoption of PEVs. Studies that make projections based on future policy scenarios and those that focus solely on international markets are not included in this report. Studies that only provide an overview of the current market without discussing how incentives influence the market are also not included.

33 ADVANCED PROPULSION SYSTEMS↗

Effects of star-shape poly(alkyl methacrylate) arm uniformity on lubricant properties

Star-shaped poly(alkyl methacrylate)s (PAMAs) were prepared and blended into an additive-free engine oil to assess the structure property relationship between macromolecular structure and lubricant performance. These additives were designed with a comparable number of repeating units per arm and the number of arms was varied between 3 and 6. Well-defined star-shaped PAMAs were synthesized by atom transfer radical polymerization (ATRP) via a core-first strategy from multi-functional headgroups. Observations of the polymer-oil blends suggest that stars with less than four arms are favorable as a viscosity index improver (VII), and molecular weight dominates viscosity-related effects over other structural features. Star-shaped PAMAs, as oil additives, effectively reduce the friction coefficient in both mixed and boundary lubrication regime. Several analogs outperformed commercial VIIs in both viscosity and friction performance. Furthermore, increased wear rates were observed for these star-shaped PAMAs in the boundary lubrication regime suggesting pressure-sensitive conformations may exist.

36 MATERIALS SCIENCE↗

Annual Report - Compatibility of ZDDP and ionic liquid anti-wear additives with hard coatings for engine lubrications

The objectives for this considerations described here are to; investigate the compatibility of engine lubricant antiwear (AW) additives, specifically conventional zinc dialkyldithiophosphate (ZDDP) and newly developed ionic liquids (ILs), with selected commercial hard coatings, and provide fundamental understanding to guide future development of engine lubricants.

33 ADVANCED PROPULSION SYSTEMS↗

Chlorogenic acid ameliorates endotoxin-induced liver injury by promoting mitochondrial oxidative phosphorylation

Acute or chronic hepatic injury is a common pathology worldwide. Mitochondrial dysfunction and the depletion of adenosine triphosphate (ATP) play important roles in liver injury. Chlorogenic acids (CGA) are some of the most abundant phenolic acids in human diet. This study was designed to test the hypothesis that CGA may protect against chronic lipopolysaccharide (LPS)-induced liver injury by modulating mitochondrial energy generation. CGA decreased the activities of serum alanine aminotransferase, aspartate aminotransferase and alkaline phosphatase. The contents of ATP and adenosine monophosphate (AMP), as well as the ratio of AMP/ATP, were increased after CGA supplementation. The activities of enzymes that are involved in glycolysis were reduced, while those of enzymes involved in oxidative phosphorylation were increased. Moreover, phosphorylated AMP-activated protein kinase (AMPK), and mRNA levels of AMPK-α, peroxisome proliferator-activated receptor-gamma coactivator 1α (PGC-1α), nuclear respiratory factor 1, and mitochondrial DNA transcription factor A were increased after CGA supplementation. Collectively, these findings suggest that the hepatoprotective effect of CGA might be associated with enhanced ATP production, the stimulation of mitochondrial oxidative phosphorylation and the inhibition of glycolysis. - Highlights: • Dietary supplementation with chlorogenic acid (CGA) improved endotoxin-induced liver injury. • Chlorogenic acid enhances ATP increase and shifts energy metabolism, which is correlated with up-regulation AMPK and PGC-1α. • The possible mechanism of CGA on mitochondrial biogenesis was correlated with up-regulation AMPK and PGC-1α.

60 APPLIED LIFE SCIENCES↗

Probing the molecular design of hyper-branched aryl polyesters towards lubricant applications

We report novel polymeric materials that may be used as viscosity index improvers (VII) for lubricant applications. Our efforts included probing the comb-burst hyper-branched aryl polyester architecture for beneficial viscosity and friction behavior when utilized as an additive in a group I oil. The monomer was designed as to undergo polymerization via polycondensation within the architectural construct (AB2), typical of hyperbranched polymers. The monomer design was comprised of aliphatic arms (12 or 16 methylenes) to provide the necessary lipophilicity to achieve solubility in a non-polar medium. Once polymerized, via catalyst and heat, the surface alcohols were functionalized with fatty acids (lauric and palmitic). Controlling the aliphatic nature of the internal arms and peripheral end-groups provided four unique flexible polymer designs. Changing the reaction time and concentration provided opportunities to investigate the influence of molecular weight and branching density on oil-solubility, viscosity, and friction. Oil-solubility was found to decrease with fewer internal carbons, but the number of internal carbons appears to have little influence on the bulk solution viscosity. At concentrations of 2 wt % in a group I base oil, these polymer additives demonstrated an improved viscosity index and reduced friction coefficient, validating the basic approach.

Robinson, Joshua W.↗