Engineering Papers⌕ Search

Engineering topics

Zhou, Xu

Publications and source records attributed to Zhou, Xu.

At least 37 records · Page 2

Directed Energy Transfer through DNA-templated J-aggregates

Strongly coupled molecular dye aggregates have unique optoelectronic properties that often resemble those of light harvesting complexes found in nature. The exciton dynamics in coupled dye aggregates could enhance the long-range transfer of optical excitation energy with high efficiency. In principle, dye aggregates could serve as important components in molecular-scale photonic devices, however, rational design of these coupled dye aggregates with precise control over their organization, interactions and dynamics remains a challenge. DNA nanotechnology has recently been used to build an excitonic circuit by organizing pseudoisocyanine (PIC) dyes forming J-aggregates on the templates of poly(dA)-poly(dT) DNA duplexes. Here, the excitonic properties of the PIC J-aggregates on DNA are characterized spectroscopically in detail using poly(dA)-poly(dT) tract lengths of 24 and 48 base pairs. The excitonic properties of these DNA templated dye assemblies depend on the length and sequence of the DNA template. The incorporation of a gap of two GC base pairs between two segments of poly(dA)-poly(dT) DNA markedly reduces the delocalization of excitation in the J-aggregates.Using a quantum dot (QD) as the light absorber and energy donor and using Alexa Fluor 647 (AF647) as the energy acceptor, with a DNA-templated J-aggregate in between, significant energy transfer from QD to AF647 is observed over a distance far longer than possible without the aggregate bridge. By comparing the efficiency of energy transfer through a continuous J-aggregate with the efficiency when the aggregate has a discontinuity in the middle, the effects of energy transfer within the aggregate bridge between the donor and acceptor are evaluated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of a double Time-Of-Flight detector system for accurate velocity measurement in a storage ring using laser beams

The Isochronous Mass Spectrometry (IMS) is a powerful tool for mass measurements of exotic nuclei with half-lives as short as several tens of micro-seconds in storage rings. In order to improve the mass resolving power while preserving the acceptance of the storage ring, the IMS with two Time-Of-Flight (TOF) detectors has been implemented at the storage ring CSRe in Lanzhou, China. Additional velocity information beside the revolution time in the ring can be obtained for each of the stored ions by using the double TOF detector system. In this paper, we introduced a new method of using a 658 nm laser range finder and a short-pulsed ultra-violet laser to directly measure the distance and time delay difference between the two TOF detectors which were installed inside the 10 -11 mbar vacuum chambers. Here, the results showed that the distance between the two ultra-thin carbon foils of the two TOF detectors was ranging from 18032.5 mm to 18035.0 mm over a measurable area of 20x20 mm 2 .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Mass–Metallicity Relation and Fundamental Metallicity Relation of Metal-poor Star-forming Galaxies at 0.6<$Z$<0.9 from the eBOSS Survey

The stellar mass–metallicity relation (M * –Z; MZR) indicates that the metallicities of galaxies increase with increasing stellar masses. The fundamental metallicity relation (FMR) suggests that galaxies with higher star formation rates (SFRs) tend to have lower metallicities for a given stellar mass. To examine whether the MZR and FMR still hold at poorer metallicities and higher redshifts, we compile a sample of 35 star-forming galaxies (SFGs) at 0.6 < $z$ < 0.9 using the public spectral database (v5_10_0) of emission-line galaxies from the extended Baryon Oscillation Spectroscopic Survey. These galaxies are identified for their significant auroral [O iii]λ4363 emission line (S/N $\leqslant$ 3). With the electronic temperature metallicity calibration, we find nine SFGs that are extremely metal-poor galaxies with 12 + log(O/H) $\leqslant$ 7.69 (1/10 Z ⊙ ). The metallicity of the most metal-deficient galaxy is 7.35 ± 0.09 (about 1/20 Z ⊙ ). Compared to the SFGs with normal metallicities in the local and high-redshift universe, our metal-poor SFGs have more than 10 times higher SFRs at a fixed stellar mass. We create a new mass–SFR relation for these metal-poor galaxies at 0.6 < $z$ < 0.9. Due to the higher SFRs and younger stellar ages, our metal-poor SFGs deviate from the MZR and FMR in the local universe toward lower metallicities, confirming the existence of FMR, as well as the cosmic evolution of MZR and FMR with redshift.

79 ASTRONOMY AND ASTROPHYSICS↗

Lab-scale Development of a Hybrid Capture System with Advanced Membrane, Solvent system, and Process Integration

The objective of the project is to achieve lab-scale demonstration of a transformational hybrid membrane/solvent system for the capture of CO 2 from flue gas. A novel process integration scheme was proposed to overcome the low partial pressure of CO 2 present in flue gas. This scheme takes advantage of the potential synergies inherent in the membrane and solvent capture systems. The proposed hybrid technology replaces the second-stage membrane with a solvent capture process. The combustion air is used as a sweeping gas in the solvent stripper. This overall configuration has the major advantages of requiring much less air and eliminating the problems associated with oxygen slip in the membrane-based systems. Even more importantly, because of the presence of the air sweep in the stripper, much lower temperatures are required for solvent regeneration, which enables heat integration to the point that no process steam is required. This project was to perform lab-scale demonstration of Liquid Ion Solutions (LIS) transformational hybrid membrane/solvent system for post-combustion CO 2 capture while demonstrating significant progress toward achievement of the overall fossil energy performance goals of 90% CO 2 capture rate with 95% CO 2 purity at a cost of electricity 30% less than baseline capture approaches. This report is written chronologically based on budget periods. Each budget period discusses the work performed and its results. At the end of each budget period the milestone charts are provided to show the progress. This project was not able to meet its stated goals. The performances of the power plant equipped with the hybrid process and Baseline Case B12B were compared. The simulation results showed that the power plant equipped with hybrid CO2 capture process has an improved thermal efficiency of 33.4% compared to the Baseline Case B12B, which is 32.5%. However, the COE for the hybrid process is $146.3/MWh which is higher than the $142.8/MWh for Case B12B. If this process were to be applied as a retrofit, it may make sense to use this configuration as it does not require any change in an existing plant configuration and steam cycle. However, for a new powerplant the capital cost is higher than the Case B12B. On the membrane development side, we successfully showed that interfacially-controlled envelope (ICE) membranes work. The inclusion of surface modified nano-particles results in much higher gas diffusivities. The Gen-1 ICE membrane developed under this project showed exceptional improved permeability for CO 2 . However, we ran into major problems which were associated with the scalability and reproducibility of the poly(phosphozene) polymers. The issues with scale-up are and batch to batch variability is also discussed. At the end of this report we have provided our recommendations on materials development for better membrane materials and alluded to the use of much simpler chemistry while keeping the concept of ICE membrane intact. It is also clear that vacuum and compression equipment is costly. If a process which can eliminate the use of vacuum and compression equipment would significantly decrease the overall cost of capture. Some thoughts regarding such system is also provided in the outlook portion of this report.

20 FOSSIL-FUELED POWER PLANTS↗

The Second Data Release of the Beijing–Arizona Sky Survey

This paper describes the second data release (DR2) of the Beijing-Arizona Sky Survey (BASS). BASS is an imaging survey covering a 5400 deg 2 footprint in the g and r bands using the 2.3 m Bok telescope. DR2 includes the observations through 2017 July obtained by BASS and by the Mayall z-band Legacy Survey (MzLS), which used the 4 m Mayall telescope to observe the same footprint. BASS and MzLS have completed 72% and 76% of their observations. The two surveys will be served for the spectroscopic targeting of the upcoming Dark Energy Spectroscopic Instrument. Both BASS and MzLS data are reduced by the same pipeline. We have updated the basic data reduction and photometric calibrations in DR2. In particular, source detections are performed on stacked images, and photometric measurements are co-added from single-epoch images based on these sources. The median 5σ point-source depths after Galactic extinction corrections are 24.05, 23.61, and 23.10 mag for the g, r, and z bands, respectively. The DR2 data products include stacked images, co-added catalogs, and single-epoch images and catalogs. The BASS website (http://batc.bao.ac.cn/BASS/) provides detailed information and links to download the data.

79 ASTRONOMY AND ASTROPHYSICS↗

Compressive Properties and Energy Absorption of Aluminum Foams with a Wide Range of Relative Densities

Quasi-static uniaxial compressive experiments were conducted on aluminum foams with a wide range of relative densities (0.134-0.472). The compressive properties and energy absorption capacity were systematically characterized and compared in a more suitable way. The compressive stress instead of compressive strain achieved during energy absorption process was taken into consideration. The results show that aluminum foam is not a kind of energy absorption materials with a stationary plateau region at the plastic deformation stage. There exists a strain hardening phenomenon which makes the stress–strain curve incline at this stage. For every aluminum foam with certain relative density, there exists an optimal stress. Under its optimal stress condition, the foam can absorb the maximum energy compared to foams with whatever different relative densities. The optimal stress and corresponding maximum energy absorption capacity increase with the increase in the foam’s relative density.

36 MATERIALS SCIENCE↗

Photometric Calibration for the Beijing–Arizona Sky Survey and Mayall z -band Legacy Survey

We present the photometric calibration of the Beijing–Arizona Sky Survey and Mayall z-band Legacy Survey, which are two of the three wide-field optical legacy imaging surveys to provide the baseline targeting data for the Dark Energy Spectroscopic Instrument project. The method of our photometric calibration is subdivided into the external and internal processes. The former utilizes the point-source objects of Pan-STARRS1 survey (PS1) as the reference standards to achieve the zero points of the absolute flux for individual exposures. And then the latter revise the zero points to make them consistent across the survey based on multiple tilings and large offset overlaps. Our process achieves a homogeneous photometric calibration over most of the sky with precision better than 10 mmag for g and r bands, 15 mmag for z band. The accuracy of the calibration is better than 1% at the bright end (16–18 mag) over most of the survey area.

79 ASTRONOMY AND ASTROPHYSICS↗

Gas Release Behavior of Cu-TiH{sub 2} Composite Powder and Its Application as a Blowing Agent to Fabricate Aluminum Foams with Low Porosity and Small Pore Size

Compared to traditional pore structure with high porosity (≥ 80 pct) and large pore size (≥ 3 mm), aluminum foams with low porosity (60 to 70 pct) and small pore size (≤ 2 mm) possess higher compressive property and formability. In order to achieve the goal of reducing pore size, Cu-TiH{sub 2} composite powder prepared by ball milling preoxidized TiH{sub 2} with Cu powder was used as a blowing agent. Its gas release behavior was characterized by thermogravimetric analysis and differential scanning calorimetry. The results show that the ball milling treatment can advance the gas release process and slow the gas release rate at the same time. All these changes are favorable to the reduction of porosity and pore size. Such Cu-TiH{sub 2} composite powder provides an alternative way to fabricate aluminum foams with low porosity and small pore size.

36 MATERIALS SCIENCE↗

Transiting Exoplanet Monitoring Project (TEMP). III. On the Relocation of the Kepler-9 b Transit

The Kepler-9 system harbors three known transiting planets. The system holds significant interest for several reasons. First, the outer two planets exhibit a period ratio that is close to a 2:1 orbital commensurability, with attendant dynamical consequences. Second, both planets lie in the planetary mass "desert" that is generally associated with the rapid gas agglomeration phase of the core accretion process. Third, there exist attractive prospects for accurately measuring both the sky-projected stellar spin-orbit angles as well as the mutual orbital inclination between the planets in the system. Following the original Kepler detection announcement in 2010, the initially reported orbital ephemerides for Kepler-9 b and c have degraded significantly, due to the limited time base-line of observations on which the discovery of the system rested. Here, we report new ground-based photometric observations and extensive dynamical modeling of the system. These efforts allow us to photometrically recover the transit of Kepler-9 b and thereby greatly improve the predictions for upcoming transit mid-times. Accurate ephemerides of this system are important in order to confidently schedule follow-up observations of this system, for both in-transit Doppler measurements as well as for atmospheric transmission spectra taken during transit.

79 ASTRONOMY AND ASTROPHYSICS↗

Ionic cross-linked polyether and silica gel mixed matrix membranes for CO 2 separation from flue gas

Mixed matrix membranes (MMMs) were prepared by incorporating 10 wt%, 20 wt% and 30 wt% silica gel filler particles into novel ionic cross-linked polyether (IXPE) polymers. Porous silica gel has the advantage of high surface area that can increase the free volume and permeability in a polymer film while also being commercially available and low cost. The MMMs featured high chemical and thermal stability as well as a modest improvement in storage modulus. These features are due to the excellent interfacial interaction between silica gel filler particles and the polymer matrix. Increasing the loading of silica gel particles in MMMs resulted in higher permeability up to 120 Barrer for CO 2 , which is about 40% higher than the neat polymer matrix. Finally, most importantly, the MMMs maintained a very high CO 2 /N 2 selectivity performance of around 41 for all particle loadings that were tested.

36 MATERIALS SCIENCE↗

Deep Imaging of the HCG 95 Field. I. Ultra-diffuse Galaxies

We present a detection of 89 candidates of ultra-diffuse galaxies (UDGs) in a 4.9 degree{sup 2} field centered on the Hickson Compact Group 95 (HCG 95) using deep g- and r-band images taken with the Chinese Near Object Survey Telescope. This field contains one rich galaxy cluster (Abell 2588 at z = 0.199) and two poor clusters (Pegasus I at z = 0.013 and Pegasus II at z = 0.040). The 89 candidates are likely associated with the two poor clusters, giving about 50–60 true UDGs with a half-light radius r{sub e}>1.5 kpc and a central surface brightness μ(g,0)>24.0 mag arcsec{sup −2}. Deep z{sup ′}-band images are available for 84 of the 89 galaxies from the Dark Energy Camera Legacy Survey (DECaLS), confirming that these galaxies have an extremely low central surface brightness. Moreover, our UDG candidates are spread over a wide range in g − r color, and ∼26% are as blue as normal star-forming galaxies, which is suggestive of young UDGs that are still in formation. Interestingly, we find that one UDG linked with HCG 95 is a gas-rich galaxy with H i mass 1.1×10{sup 9} M {sub ⊙} detected by the Very Large Array, and has a stellar mass of M{sub ⋆}∼1.8×10{sup 8} M {sub ⊙}. This indicates that UDGs at least partially overlap with the population of nearly dark galaxies found in deep H i surveys. Our results show that the high abundance of blue UDGs in the HCG 95 field is favored by the environment of poor galaxy clusters residing in H i-rich large-scale structures.

79 ASTRONOMY AND ASTROPHYSICS↗

Transiting Exoplanet Monitoring Project (TEMP). II. Refined System Parameters and Transit Timing Analysis of HAT-P-33b

We present 10 R-band photometric observations of eight different transits of the hot Jupiter HAT-P-33b, which has been targeted by our Transiting Exoplanet Monitoring Project. The data were obtained by two telescopes at the Xinglong Station of National Astronomical Observatories of China (NAOC) from 2013 December through 2016 January, and exhibit photometric scatter of 1.6--3.0 mmag. After jointly analyzing the previously published photometric data, radial-velocity (RV) measurements, and our new light curves, we revisit the system parameters and orbital ephemeris for the HAT-P-33b system. Our results are consistent with the published values except for the planet to star radius ratio (R{sub P}/R{sub ∗}), the ingress/egress duration (τ) and the total duration (T {sub 14}), which together indicate a slightly shallower and shorter transit shape. Our results are based on more complete light curves, whereas the previously published work had only one complete transit light curve. No significant anomalies in Transit Timing Variations (TTVs) are found, and we place upper mass limits on potential perturbers, largely supplanting the loose constraints provided by the extant RV data. The TTV limits are stronger near mean-motion resonances, especially for the low-order commensurabilities. We can exclude the existence of a perturber with mass larger than 0.6, 0.3, 0.5, 0.5, and 0.3 M{sub ⊕} near the 1:3, 1:2, 2:3, 3:2, and 2:1 resonances, respectively.

79 ASTRONOMY AND ASTROPHYSICS↗

SCUSS u- BAND EMISSION AS A STAR-FORMATION-RATE INDICATOR

We present and analyze the possibility of using optical u- band luminosities to estimate star-formation rates (SFRs) of galaxies based on the data from the South Galactic Cap u band Sky Survey (SCUSS), which provides a deep u -band photometric survey covering about 5000 deg{sup 2} of the South Galactic Cap. Based on two samples of normal star-forming galaxies selected by the BPT diagram, we explore the correlations between u -band, H α , and IR luminosities by combing SCUSS data with the Sloan Digital Sky Survey and Wide-field Infrared Survey Explorer ( WISE ). The attenuation-corrected u -band luminosities are tightly correlated with the Balmer decrement-corrected H α luminosities with an rms scatter of ∼0.17 dex. The IR-corrected u luminosities are derived based on the correlations between the attenuation of u- band luminosities and WISE 12 (or 22) μ m luminosities, and then calibrated with the Balmer-corrected H α luminosities. The systematic residuals of these calibrations are tested against the physical properties over the ranges covered by our sample objects. We find that the best-fitting nonlinear relations are better than the linear ones and recommended to be applied in the measurement of SFRs. The systematic deviations mainly come from the pollution of old stellar population and the effect of dust extinction; therefore, a more detailed analysis is needed in future work.

79 ASTRONOMY AND ASTROPHYSICS↗

Fast Bayesian blind deconvolution with Huber Super Gaussian priors

We report expectation Maximization (EM) based inference has already proven to be a very powerful tool to solve blind image deconvolution (BID) problems. Unfortunately, three important problems still impede the application of EM in BID: the undesirable saddle points and local minima caused by highly nonconvex priors, the instability around zero of some of the most interesting sparsity promoting priors, and the intrinsic high computational cost of the corresponding BID algorithm. In this paper we first show how Super Gaussian priors can be made numerically tractable around zero by introducing the family of Huber Super Gaussian priors and then present a fast EM based blind deconvolution method formulated in the image space. In the proposed computational approach, image and kernel estimation are performed by using the Alternating Direction Method of Multipliers (ADMM), which allows to exploit the advantages of FFT computation. For highly nonconvex priors, we propose a Smooth ADMM (SADMM) approach to avoid poor BID estimates. In conclusion, extensive experiments demonstrate that the proposed method significantly outperforms state-of-the-art BID methods in terms of quality of the reconstructions and speed.

97 MATHEMATICS AND COMPUTING↗

Stabilization of a Quadrotor With Uncertain Suspended Load Using Sliding Mode Control

The stability and trajectory control of a quadrotor carrying a suspended load with a fixed known mass has been extensively studied in recent years. However, the load mass is not always known beforehand in practical applications. This mass uncertainty brings uncertain disturbances to the quadrotor system, causing existing controllers to have a worse performance or to be collapsed. To improve the quadrotor's stability in this situation, we investigate the impacts of the uncertain load mass on the quadrotor. By comparing the simulation results of two controllers -- the proportional-derivative (PD) controller and the sliding mode controller (SMC) driven by a sliding mode disturbance of observer (SMDO), the quadrotor's performance is verified to be worse as the uncertainty increases. The simulation results also show a controller with stronger robustness against disturbances is better for practical applications.

33 ADVANCED PROPULSION SYSTEMS↗

STELLAR VARIABILITY AND FLARE RATES FROM DOME A, ANTARCTICA, USING 2009 AND 2010 CSTAR OBSERVATIONS

The Chinese Small Telescope Array (CSTAR) carried out high-cadence time-series observations of ∼20.1 square degrees centered on the South Celestial Pole during the 2008, 2009, and 2010 winter seasons from Dome A in Antarctica. The nearly continuous six months of dark conditions during each observing season allowed for >10{sup 6} images to be collected through gri and clear filters, resulting in the detection of >10{sup 4} sources over the course of three years of operation. The nearly space-like conditions in the Antarctic plateau are an ideal testbed for the suitability of very small-aperture (<20 cm) telescopes to detect transient events, variable stars, and stellar flares. We present the results of a robust search for such objects using difference image analysis of the data obtained during the 2009 and 2010 winter seasons. While no transients were found, we detected 29 flaring events and find a normalized flaring rate of 5 ± 4 × 10{sup −7} flare hr{sup −1} for late-K dwarfs, 1 ± 1 × 10{sup −6} flare hr{sup −1} for M dwarfs and 7 ± 1 × 10{sup −7} flare hr{sup −1} for all other stars in our sample. We suggest future small-aperture telescopes planned for deployment at Dome A would benefit from a tracking mechanism, to help alleviate effects from ghosting, and a finer pixel scale, to increase the telescope's sensitivity to faint objects. We find that the light curves of non-transient sources have excellent photometric qualities once corrected for systematics, and are limited only by photon noise and atmospheric scintillation.

79 ASTRONOMY AND ASTROPHYSICS↗