Engineering Papers⌕ Search

Engineering topics

Zhou, Wei

Publications and source records attributed to Zhou, Wei.

At least 73 records · Page 4

Ocular toxicity of AUY922 in pigmented and albino rats

AUY922, a heat shock protein 90 inhibitor is associated with ocular adverse events (AEs). To provide a better understanding of ocular AEs in patients, 4 investigative studies were performed in a step-wise approach to assess retinal structure and function in pigmented (Brown Norway) and albino (Wistar) rats. In rats administered 30 mg/kg of AUY922, the AUC{sub 0–24} {sub h} and C{sub max} are comparable to that in patients at 70 mg/m{sup 2}. AUY922 at ≥ 30 mg/kg was poorly tolerated by rats with morbidity or mortality generally after the third weekly treatment. Electroretinography (ERG) changes were observed at doses ≥ 30 mg/kg. The ERG changes were dose dependent, consistent with an effect on the photoreceptors, and fully reversible. The ERG effects could not be minimized by decreasing the C{sub max} while maintaining AUC. Histopathological changes were seen mainly when rats were administered AUY922 at 100 mg/kg. The 2-hour infusion of AUY922 at 100 mg/kg caused disorganization of the outer segment photoreceptor morphology in male Brown Norway rats; the severity of the disorganization increased with the number of administrations, but was reversible during a 4-week posttreatment period. There was no major difference in ocular response between Brown Norway and Wistar rats. No changes in serum iron levels, and no changes in rhodopsin, PDE6α, β-transducin concentrations, or retinal pigment epithelium-specific protein RPE65 expression were observed after single and multiple infusions of AUY922 at 100 mg/kg compared to vehicle-treated controls. AUY922 retinal toxicity in rats recapitulates and further characterizes that reported in patients and is shown to be reversible, while a precise molecular mechanism for the effect was not determined. - Highlights: • Ocular toxicity of AUY922 was assessed in Brown Norway and Wistar rats. • AUY922 at ≥ 30 mg/kg was generally not well tolerated by rats. • Electroretinography (ERG) changes were observed at doses ≥ 30 mg/kg. • ERG changes at doses ≥ 30 mg/kg were dose-dependent, and fully reversible.

54 ENVIRONMENTAL SCIENCES↗

Structural and dynamical trends in alkali-metal silanides characterized by neutron-scattering methods

Structural, vibrational, and dynamical properties of the mono- and mixed-alkali silanides (MSiH 3 , where M = K, Rb, Cs, K 0.5 Rb 0.5 , K 0.5 Cs 0.5 , and Rb 0.5 Cs 0.5 ) were investigated by various neutron experiments, including neutron powder diffraction (NPD), neutron vibrational spectroscopy (NVS), neutron-scattering fixed-window scans (FWSs), and quasielastic neutron scattering (QENS) measurements. Structural characterization showed that the mixed compounds exhibit disordered (α) and ordered (β) phases for temperatures above and below about 200–250 K, respectively, in agreement with their monoalkali correspondents. Vibrational and dynamical properties are strongly influenced by the cation environment; in particular, there is a red shift in the band energies of the librational and bending modes with increasing lattice size as a result of changes in the bond lengths and force constants. Additionally, slightly broader spectral features are observed in the case of the mixed compounds, indicating the presence of structural disorder caused by the random distribution of the alkali-metal cations within the lattice. FWS measurements upon heating showed that there is a large increase in reorientational mobility as the systems go through the order–disorder (β–α) phase transition, and measurements upon cooling of the α-phase revealed the known strong hysteresis for reversion back to the β-phase. Interestingly, at a given temperature, among the different alkali silanide compounds, the relative reorientational mobilities of the SiH 3 – anions in the α- and β-phases tended to decrease and increase, respectively, with increasing alkali-metal mass. Lastly, this dynamical result might provide some insights concerning the enthalpy–entropy compensation effect previously observed for these potentially promising hydrogen storage materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure-dependent vibrational dynamics of Mg(BH 4 ) 2 polymorphs probed with neutron vibrational spectroscopy and first-principles calculations

We investigated the structure-dependent vibrational properties of different Mg(BH 4 ) 2 polymorphs (α, β, γ, and δ phases) with a combination of neutron vibrational spectroscopy (NVS) measurements and density functional theory (DFT) calculations, with emphasis placed on the effects of the local structure and orientation of the BH 4 - anions. DFT simulations closely match the neutron vibrational spectra. The main bands in the low-energy region (20–80 meV) are associated with the BH4 - librational modes. The features in the intermediate energy region (80–120 meV) are attributed to overtones and combination bands arising from the lower-energy modes. The features in the high-energy region (120–200 meV) correspond to the BH 4 - symmetric and asymmetric bending vibrations, of which four peaks located at 140, 142, 160, and 172 meV are especially intense. There are noticeable intensity distribution variations in the vibrational bands for different polymorphs. We can explain these differences using the spatial distribution of BH 4 - anions within various structures. An example of the possible identification of products after the hydrogenation of MgB 2 , using NVS measurements, is presented. Our results provide fundamental insights of benefit to researchers currently studying these promising hydrogen-storage materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gate-tunable rectification inversion and photovoltaic detection in graphene/WSe{sub 2} heterostructures

We studied electrical transport properties including gate-tunable rectification inversion and polarity inversion, in atomically thin graphene/WSe{sub 2} heterojunctions. Such engrossing characteristics are attributed to the gate tunable mismatch of Fermi levels of graphene and WSe{sub 2}. Also, such atomically thin heterostructure shows excellent performances on photodetection. The responsivity of 66.2 mA W{sup −1} (without bias voltage) and 350 A W{sup −1} (with 1 V bias voltage) can be reached. What is more, the devices show great external quantum efficiency of 800%, high detectivity of 10{sup 13} cm Hz{sup 1/2}/W, and fast response time of 30 μs. Our study reveals that vertical stacking of 2D materials has great potential for multifunctional electronic and optoelectronic device applications in the future.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Identification and characterization of influenza variants resistant to a viral endonuclease inhibitor

The influenza endonuclease is an essential subdomain of the viral RNA polymerase. It processes host pre-mRNAs to serve as primers for viral mRNA and is an attractive target for antiinfluenza drug discovery. Compound L-742,001 is a prototypical endonuclease inhibitor, and we found that repeated passaging of influenza virus in the presence of this drug did not lead to the development of resistant mutant strains. Reduced sensitivity to L-742,001 could only be induced by creating point mutations via a random mutagenesis strategy. Furthermore, these mutations mapped to the endonuclease active site where they can directly impact inhibitor binding. Engineered viruses containing the mutations showed resistance to L-742,001 both in vitro and in vivo, with only a modest reduction in fitness. Introduction of the mutations into a second virus also increased its resistance to the inhibitor. When using the isolated wild-type and mutant endonuclease domains, we used kinetics, inhibitor binding and crystallography to characterize how the two most significant mutations elicit resistance to L-742,001. These studies lay the foundation for the development of a new class of influenza therapeutics with reduced potential for the development of clinical endonuclease inhibitor-resistant influenza strains.

59 BASIC BIOLOGICAL SCIENCES↗

High temperature Raman investigation of few-layer MoTe{sub 2}

We present a Raman investigation of the temperature effect of single and few layer MoTe{sub 2} at an electronic device working temperature range from 300 K to 500 K. We observe linear frequency red-shifts with increasing temperature for the first order Raman active E{sup 1}{sub 2g}, A{sub 1g}, Raman inactive B{sup 1}{sub 2g} mode, and the second order ω{sub 2} mode, which can be attributed to the anharmonic effect of the interatomic potential energy. The temperature coefficients of the out-of-plane vibrational B{sup 1}{sub 2g} modes and inplane vibrational E{sup 1}{sub 2g} modes are similarly around −0.013 cm{sup −1}/K, while lower than that of out-of-plane vibration A{sub 1g} mode at −0.009 cm{sup −1}/K. The temperature coefficient of ω{sub 2} mode is −0.00521 cm{sup −1}/K, approximately half of those of the first order modes, and the temperature coefficient of transverse acoustic TA (M) mode is indirectly deduced as −0.0102 cm{sup −1}/K, which shows the corresponding Mo-Te stretching bonds of TA (M) mode behavior similarly to those of optical Raman vibrations. Our work thus provides temperature dependent lattice vibration information of MoTe{sub 2} and could be potentially useful in future optoelectronic devices based on MoTe{sub 2} related two dimensional materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The emission wavelength dependent photoluminescence lifetime of the N-doped graphene quantum dots

Aromatic nitrogen doped graphene quantum dots were investigated by steady-state and time-resolved photoluminescence (PL) techniques. The PL lifetime was found to be dependent on the emission wavelength and coincident with the PL spectrum, which is different from most semiconductor quantum dots and fluorescent dyes. This result shows the synergy and competition between the quantum confinement effect and edge functional groups, which may have the potential to guide the synthesis and expand the applications of graphene quantum dots.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A low-noise CMOS pixel direct charge sensor, Topmetal-II -

In this paper, we report the design and characterization of a CMOS pixel direct charge sensor, Topmetal-II-, fabricated in a standard 0.35 μm CMOS Integrated Circuit process. The sensor utilizes exposed metal patches on top of each pixel to directly collect charge. Each pixel contains a low-noise charge-sensitive preamplifier to establish the analog signal and a discriminator with tunable threshold to generate hits. The analog signal from each pixel is accessible through time-shared multiplexing over the entire array. Hits are read out digitally through a column-based priority logic structure. Tests show that the sensor achieved a <15e - analog noise and a 200e - minimum threshold for digital readout per pixel. The sensor is capable of detecting both electrons and ions drifting in gas. Lastly, these characteristics enable its use as the charge readout device in future Time Projection Chambers without gaseous gain mechanism, which has unique advantages in low background and low rate-density experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Moving Toward Quantifying Reliability - The Next Step in a Rapidly Maturing PV Industry: Preprint

Some may say that PV modules are moving toward being a simple commodity, but most major PV customers ask: 'How can I minimize chances of a module recall?' Or, 'How can I quantify the added value of a 'premium' module?' Or, 'How can I assess the value of an old PV system that I'm thinking of purchasing?' These are all questions that PVQAT (the International PV Quality Assurance Task Force) and partner organizations are working to answer. Defining standard methods for ensuring minimal acceptable quality of PV modules, differentiating modules that provide added value in the toughest of environments, and creating a process (e.g. through IECRE [1]) that can follow a PV system from design through installation and operation are tough tasks, but having standard approaches for these will increase confidence, reduce costs, and be a critical foundation of a mature PV industry. This paper summarizes current needs for new tests, some challenges for defining those tests, and some of the key efforts toward development of international standards, emphasizing that meaningful quantification of reliability (as in defining a service life prediction) must be done in the context of a specific product with design parameters defined through a quality management system.

14 SOLAR ENERGY↗

Unparalleled lithium and sodium superionic conduction in solid electrolytes with large monovalent cage-like anions

Solid electrolytes with sufficiently high conductivities and stabilities are the elusive answer to the inherent shortcomings of organic liquid electrolytes prevalent in today's rechargeable batteries. We recently revealed a novel fast-ion-conducting sodium salt, Na 2 B 12 H 12 , which contains large, icosahedral, divalent B 12 H 12 2– anions that enable impressive superionic conductivity, albeit only above its 529 K phase transition. Its lithium congener, Li 2 B 12 H 12 , possesses an even more technologically prohibitive transition temperature above 600 K. Here we show that the chemically related LiCB 11 H 12 and NaCB 11 H 12 salts, which contain icosahedral, monovalent CB 11 H 12 – anions, both exhibit much lower transition temperatures near 400 K and 380 K, respectively, and truly stellar ionic conductivities (>0.1 S cm –1 ) unmatched by any other known polycrystalline materials at these temperatures. Furthermore with proper modifications, we are confident that room-temperature-stabilized superionic salts incorporating such large polyhedral anion building blocks are attainable, thus enhancing their future prospects as practical electrolyte materials in next-generation, all-solid-state batteries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of cation concentration on photocatalytic performance over magnesium vanadates

A series of magnesium vanadates (MgV {sub 2}O{sub 6}, Mg{sub 2}V {sub 2}O{sub 7}, and Mg{sub 3}V {sub 2}O{sub 8}) were synthesized to investigate the effect of cation concentration on photocatalytic performance. The samples were characterized by X-ray diffraction, field emission-scanning electron microscopy, UV-visible diffuse reflectance spectroscopy, and fluorescence spectroscopy. The photocatalytic O{sub 2} evolution experiments under visible light irradiation showed Mg{sub 2}V {sub 2}O{sub 7} exhibits the best performance, while Mg{sub 3}V {sub 2}O{sub 8} has the lowest activity. The density functional theory calculations indicated that the lowest unoccupied states of Mg{sub 3}V {sub 2}O{sub 8} are the mostly localized by the cation layers. The fluorescence spectra and fluorescence decay curves gave evident performances of excited states of magnesium vanadates and pointed out MgV {sub 2}O{sub 6} has a very short excited electron lift-time. Mg{sub 2}V {sub 2}O{sub 7} performs high photocatalytic activity because of its high electron mobility and long electron life-time.

36 MATERIALS SCIENCE↗

Raman vibrational spectra of bulk to monolayer Re S 2 with lower symmetry

Lattice structure and symmetry of two-dimensional (2D) layered materials are of key importance to their fundamental mechanical, thermal, electronic and optical properties. Raman spectroscopy, as a convenient and nondestructive tool, however has its limitations on identifying all symmetry allowing Raman modes and determining the corresponding crystal structure of 2D layered materials with high symmetry like graphene and MoS 2 . Due to lower structural symmetry and extraordinary weak interlayer coupling of ReS 2 , we successfully identified all 18 first-order Raman active modes for bulk and monolayer ReS 2 . Without van der Waals (vdW) correction, our local density approximation (LDA) calculations successfully reproduce all the Raman modes. Our calculations also suggest no surface reconstruction effect and the absence of low frequency rigid-layer Raman modes below 100 cm -1 . As a result, combining with Raman and LDA thus provides a general approach for studying the vibrational and structural properties of 2D layered materials with lower symmetry.

36 MATERIALS SCIENCE↗

Integrated digital inverters based on two-dimensional anisotropic ReS₂ field-effect transistors

Semiconducting two-dimensional transition metal dichalcogenides are emerging as top candidates for post-silicon electronics. While most of them exhibit isotropic behaviour, lowering the lattice symmetry could induce anisotropic properties, which are both scientifically interesting and potentially useful. Here we present atomically thin rhenium disulfide (ReS₂) flakes with unique distorted 1T structure, which exhibit in-plane anisotropic properties. We fabricated monolayer and few-layer ReS₂ field-effect transistors, which exhibit competitive performance with large current on/off ratios (~10⁷) and low subthreshold swings (100 mV per decade). The observed anisotropic ratio along two principle axes reaches 3.1, which is the highest among all known two-dimensional semiconducting materials. Furthermore, we successfully demonstrated an integrated digital inverter with good performance by utilizing two ReS₂ anisotropic field-effect transistors, suggesting the promising implementation of large-scale two-dimensional logic circuits. Our results underscore the unique properties of two-dimensional semiconducting materials with low crystal symmetry for future electronic applications.

36 MATERIALS SCIENCE↗