Zhou, Laidong | Engineering Papers

DOE OSTI2024

4 V Na Solid State Batteries Enabled by a Scalable Sodium Metal Oxyhalide Solid Electrolyte

All-solid-state sodium batteries (ASSSBs) are viable candidates for large scale energy storage that could vie with lithium. Ductile solid catholytes for such cells that can be prepared without extensive ball milling and directly paired with high voltage sodium cathodes are lacking, however. We report a new amorphous fast Na-ion conducting metal oxychloride that meets these criteria, synthesized through a scalable and low-cost route based on a spontaneous solid-state reaction with simple short mixing and 100 °C annealing. It has an ionic conductivity of 1.2 mS·cm–1 and low activation energy of 0.31 eV. Due to its dual O2–/Cl– framework, it exhibits a high anodic potential of 4 V vs Na+/Na and good chemical/electrochemical compatibility with high voltage sodium cathode materials. ASSSBs consisting of the oxychloride solid electrolyte paired with a high voltage P2–Na2/3Ni1/3Mn2/3O2 cathode showed stable long-term cycling with a 4.0 V vs Na3Sn cutoff potential and even to 4.3 V.

solid-state electrolyte, solid-state batteries, Nu↗

DOE OSTI2023

Li 3– x Zr x (Ho/Lu) 1– x Cl 6 Solid Electrolytes Enable Ultrahigh-Loading Solid-State Batteries with a Prelithiated Si Anode

We report two new families of lithium metal chloride solid electrolytes Li 3–x Zr x (M) 1–x Cl 6 (0 ≤ x ≤ 0.8; M = Ho or Lu) with ionic conductivities of up to 1.8 mS cm –1 and a low activation energy of 0.34 eV. Structural elucidation via high-resolution neutron diffraction determines the Li ion distribution in trigonal Li 3 HoCl 6 , orthorhombic-I Li 3 LuCl 6 , and orthorhombic-II Li 2.4 Zr 0.6 (Ho/Lu) 0.4 Cl 6 . The last compound exhibits well-connected Li-ion pathways and abundant Li-ion carriers/vacancies to promote diffusion. All-solid-state batteries with Li 2.6 Zr 0.4 (Ho/Lu) 0.6 Cl 6 solid electrolytes and NCM85 cathodes exhibit stable cycling up to 4.6 V vs Li + /Li, which is even preserved up to 4.8 V. Stable cathode interphases are formed for both electrolytes upon cycling to 4.3, 4.6, and 4.8 V cutoff potentials, as identified by a ToF-SIMS analysis. Solid-state cells with a prelithiated Li 0.7 Si anode exhibit a significantly increased initial coulombic efficiency of 94.5% compared to Si and a high areal capacity of up to 16.3 mAh·cm –2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

A New Sodium Thioborate Fast Ion Conductor: Na 3 B 5 S 9

Abstract We report a new sodium fast‐ion conductor, Na 3 B 5 S 9 , that exhibits a high Na ion total conductivity of 0.80 mS cm −1 (sintered pellet; cold‐pressed pellet=0.21 mS cm −1 ). The structure consists of corner‐sharing B 10 S 20 supertetrahedral clusters, which create a framework that supports 3D Na ion diffusion channels. The Na ions are well‐distributed in the channels and form a disordered sublattice spanning five Na crystallographic sites. The combination of structural elucidation via single crystal X‐ray diffraction and powder synchrotron X‐ray diffraction at variable temperatures, solid‐state nuclear magnetic resonance spectra and ab initio molecular dynamics simulations reveal high Na‐ion mobility (predicted conductivity: 0.96 mS cm −1 ) and the nature of the 3D diffusion pathways. Notably, the Na ion sublattice orders at low temperatures, resulting in isolated Na polyhedra and thus much lower ionic conductivity. This highlights the importance of a disordered Na ion sublattice—and existence of well‐connected Na ion migration pathways formed via face‐sharing polyhedra—in dictating Na ion diffusion.

Zhou, Laidong↗

DOE OSTI2023

A New Sodium Thioborate Fast Ion Conductor: Na 3 B 5 S 9

Abstract We report a new sodium fast‐ion conductor, Na 3 B 5 S 9 , that exhibits a high Na ion total conductivity of 0.80 mS cm −1 (sintered pellet; cold‐pressed pellet=0.21 mS cm −1 ). The structure consists of corner‐sharing B 10 S 20 supertetrahedral clusters, which create a framework that supports 3D Na ion diffusion channels. The Na ions are well‐distributed in the channels and form a disordered sublattice spanning five Na crystallographic sites. The combination of structural elucidation via single crystal X‐ray diffraction and powder synchrotron X‐ray diffraction at variable temperatures, solid‐state nuclear magnetic resonance spectra and ab initio molecular dynamics simulations reveal high Na‐ion mobility (predicted conductivity: 0.96 mS cm −1 ) and the nature of the 3D diffusion pathways. Notably, the Na ion sublattice orders at low temperatures, resulting in isolated Na polyhedra and thus much lower ionic conductivity. This highlights the importance of a disordered Na ion sublattice—and existence of well‐connected Na ion migration pathways formed via face‐sharing polyhedra—in dictating Na ion diffusion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Structure–transport correlations in Na 11 Sn 2 SbSe 12 and its sulfide solid solutions

We report a new ion conductor—Na 11 Sn 2 SbSe 12 —as a possible candidate for a solid catholyte in composite cathodes for all-solid state Na-batteries, which exhibits a room temperature ionic conductivity of 0.15 ± 0.03 mS cm −1 and an activation energy of 0.39 ± 0.02 eV. The sulfide solid solutions of Na 11 Sn 2 SbSe 12 , namely, Na 11 Sn 2 SbS 12−x Se x (x = 1 and 6), were also investigated through a combination of Rietveld refinement against powder x-ray diffraction data and electrochemical impedance spectroscopy to reveal the complex structure–property relationships governing ion transport in this class of materials. Meanwhile, broadening of the Na-ion diffusion pathways in Na 11 Sn 2 SbSe 12 is expected to facilitate Na-ion transport compared to the sulfide-rich member of the solid solution, the opposite holds: increasing the Se fraction in Na 11 Sn 2 SbS 12−x Se x leads to a little change in the activation energy but a reduction in the ionic conductivity. We ascribe this to the lowering of the prefactor, σ 0 , in the Arrhenius relationship with increasing lattice “softening” as a function of higher Se content.

Ramos, Erika P.↗

DOE OSTI2022

Li-Rich and Halide-Deficient Argyrodite Fast Ion Conductors

Here, we report on a new family of halide-deficient and Li-rich argyrodite fast-ion conductors, Li 6+x PS 5+x (Cl/Br/I) 1–x (0 ≤ x ≤ 0.85). Exploration of the influence of aliovalent anion substitution in Li 6 PS 5 X (X = Cl, Br, I)–using a combination of high-resolution powder neutron diffraction and electrochemical impedance spectroscopy–reveals that aliovalent anion substitution induces higher Li-ion concentration and Li site disorder, and creates S 2– /I – anion site disorder on the 4a site. In the series Li 6+x PS 5+x I 1–x (0 ≤ x ≤ 0.4), the resulting conductivity for Li 6.4 PS 5.4 I 0.6 (0.13 mS·cm –1 ) represents almost a 100-fold increase over that of the parent phase, Li 6 PS 5 I (0.0033 mS·cm –1 ), and establishes one of the first fast-ion conducting argyrodite thiophosphate iodides. For Cl-argyrodites, the ionic conductivity decreases a little with lower halide-content but ionic conductivity for the Br-argyrodites is almost unchanged. Overall, all Cl/Br-argyrodites Li 6 +xPS 5+x (Cl/Br) 1–x (0 ≤ x ≤ 0.75) with a low halide content exhibit surprisingly high ionic conductivities > 1 mS·cm –1 despite a very low degree of sulfur/halogen anion site disorder. Our findings highlight the importance of attaining a disordered Li-ion sublattice and sulfur/halogen anion site disorder (anionic charge homogeneity) in argyrodites, where Li ions occupy high energy sites and activate concerted ion migration that drives the ionic conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗