Three-Dimensionally Mesostructured Fe 2 O 3 Electrodes with Good Rate Performance and Reduced Voltage Hysteresis
Ni scaffolded mesostructured 3D Fe 2 O 3 electrodes were fabricated by colloidal templating and pulsed electrodeposition. The scaffold provided short pathways for both lithium ions and electrons in the active phase, enabling fast kinetics and thus a high power density. The scaffold also resulted in a reduced voltage hysteresis. The electrode showed a reversible capacity of ~1000 mA h g -1 at 0.2 A g -1 (~0.2 C) for about 20 cycles, and at a current density of 20 A g -1 (~20 C) the deliverable capacity was about 450 mA h g -1 . The room temperature voltage hysteresis at 0.1 A g -1 (~0.1 C) was 0.62 V, which is significantly smaller than that normally reported in the literature. And it could be further reduced to 0.42 V when cycling at 45 ºC. Potentiostatic electrochemical impedance spectroscopy (PEIS) studies indicated the small voltage hysteresis may be due to a reduction in the Li 2 O/Fe interfacial area in the electrode during cycling relative to convention-al conversion systems.