Engineering Papers⌕ Search

Engineering topics

Zhou, B.

Publications and source records attributed to Zhou, B..

27 records · Page 2

Preparation of layered thin film samples for angle-resolved photoemission spectroscopy

Materials with layered van der Waals crystal structures are exciting research topics in condensed matter physics and materials science due to outstanding physical properties associated with their strong two dimensional nature. Prominent examples include bismuth tritelluride and triselenide topological insulators (TIs), which are characterized by a bulk bandgap and pairwise counter-propagating spin-polarized electronic surface states. Angle-resolved photoemission spectroscopy (ARPES) of ex-situ grown thin film samples has been limited by the lack of suitable surface preparation techniques. We demonstrate the shortcomings of previously successful conventional surface preparation techniques when applied to ternary TI systems which are susceptible to severe oxidation. We show that in-situ cleaving is a simple and effective technique for preparation of clean surfaces on ex-situ grown thin films for high quality ARPES measurements. The method presented here is universally applicable to other layered van der Waals systems as well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic properties of gadolinium substituted Bi{sub 2}Te{sub 3} thin films

Thin film GdBiTe{sub 3} has been proposed as a candidate material in which to observe the quantum anomalous Hall effect. As a thermal non-equilibrium deposition method, molecular beam epitaxy (MBE) has the ability to incorporate large amounts of Gd into Bi{sub 2}Te{sub 3} crystal structures. High-quality rhombohedral (Gd{sub x}Bi{sub 1-x}){sub 2}Te{sub 3} films with substitutional Gd concentrations of x {<=} 0.4 were grown by MBE. Angle-resolved photoemission spectroscopy shows that the topological surface state remains intact up to the highest Gd concentration. Magnetoresistance measurements show weak antilocalization, indicating strong spin orbit interaction. Magnetometry reveals that the films are paramagnetic with a magnetic moment of 6.93 {mu}{sub B} per Gd{sup 3+} ion.

36 MATERIALS SCIENCE↗

Two-step growth of high quality Bi{sub 2}Te{sub 3} thin films on Al{sub 2}O{sub 3} (0001) by molecular beam epitaxy

Large-area topological insulator Bi{sub 2}Te{sub 3} thin films were grown on Al{sub 2}O{sub 3} (0001) using a two-temperature step molecular beam epitaxy growth process. By depositing a low temperature nucleation layer to serve as a template for high temperature epitaxial film growth, a high quality terrace-step surface morphology with a significant reduction in three-dimensional defect structures was achieved. X-ray diffraction measurements indicate that high crystalline quality Bi{sub 2}Te{sub 3} layers were grown incoherently by van der Waals epitaxy using this technique. Angle resolved photoemission spectroscopy measurements verified the integrity of this growth method by confirming the presence of metallic surface states on cleaved two-step Bi{sub 2}Te{sub 3} samples.

36 MATERIALS SCIENCE↗

Using dimethylether as a drift gas in a high precision drift tube detector

Excellent spatial resolution (34 microns) has been obtained using dimethylether, (CH3)2O at 1 atm in a small drift tube detector. This is better by at least a factor of 2 compared to previous work (about 80 microns) with a conventional gas (a 50-50 argon-ethane mixture) in the same detector. The Lorentz angle and the gas amplification have been measured over a wide range of electric and magnetic fields.

Zhou, B.↗

Efficient, frequency-stable laser-diode-pumped Nd:YAG laser

One of the main goals of the study was to demonstrate a low-power efficient Nd:YAG laser oscillator for applications in remote coherent Doppler anemometry. An electrical-to-optical slope efficiency of 6.5 percent has been achieved by using commercially available CW laser diodes of up to 100 mW to pump monolithic Nd:YAG rod lasers. The observed Nd:YAG oscillation threshold is at 2.3 mW of laser-diode output power, i.e., a small fraction of the rated output power. The highest Nd:YAG CW output power reached is 4.4 mW at an overall electrical-to-optical efficiency of 1.5 percent. The frequency jitter is less than 10 kHz in 0.3 s.

Zhou, B.↗

Potential for coherent Doppler wind velocity lidar using neodymium lasers

Existing techniques for the frequency stabilization of Nd:YAG lasers operating at 1.06 micron, and the high-gain amplification of radiation at that wavelength, make possible the construction of a coherent Doppler wind velocity lidar using Nd:YAG. Velocity accuracy and range resolution are better at 1.06 micron than at 10.6 microns at the same level of the SNR. Backscatter from the atmosphere at 1.06 micron is greater than that at 10.6 microns by about 2 orders of magnitude, but the quantum-limited noise is higher by 100 also. Near-field attenuation and turbulent effects are more severe at 1.06 micron. In some configurations and environments, the 1.06-micron wavelength may be the better choice, and there may be technological advantages favoring the use of solid-state lasers in satellite systems.

Kane, T. J.↗