Engineering Papers⌕ Search

Engineering topics

Zhong, Wei

Publications and source records attributed to Zhong, Wei.

At least 19 records

LncRNA ZFAS1 promotes invasion of medullary thyroid carcinoma by enhancing EPAS1 expression via miR‐214‐3p/UCHL1 axis

Abstract lncRNA ZFAS1 was identified to facilitate thyroid cancer, but its role in medullary thyroid carcinoma (MTC) remains unknown. This study aimed to unravel the potential function of this lncRNA in MTC by investigating the involvement of the lncRNA ZFAS1 in a ceRNA network that regulates MTC invasion. Proliferation, invasion, and migration of cells were evaluated using EdU staining and Transwell assays. Immunoprecipitation (IP) assays, dual‐fluorescence reporter, and RNA IP assays were employed to examine the binding interaction among genes. Nude mice were used to explore the role of lncRNA ZFAS1 in MTC in vivo. ZFAS1 and EPAS1 were upregulated in MTC. Silencing ZFAS1 inhibited MTC cell proliferation and invasion under hypoxic conditions, which reduced EPAS1 protein levels. UCHL1 knockdown increased EPAS1 ubiquitination. ZFAS1 positively regulated UCHL1 expression by binding to miR‐214‐3p. Finally, silencing ZFAS1 significantly repressed tumor formation and metastasis in MTC. LncRNA ZFAS1 promotes invasion of MTC by upregulating EPAS1 expression via the miR‐214‐3p/UCHL1 axis.

Chen, Wenjing↗

Design, Fabrication, and Screening of Environmental‐Thermal Barrier Coatings Prepared by Ultrafast High‐Temperature Sintering

Abstract The demand for more efficient gas turbines relies heavily on the development of new environmental‐thermal barrier coatings (ETBCs). However, there is still uncertainty about which alloys and composites will be used for the next generation of turbine blades, as well as the most promising coating materials. Herein, an ETBCs development strategy is presented by integrating the coating design, synthesis, and screening using an ultrafast high temperature sintering (UHS) technique to accelerate coating improvements. The initial basis for composition selection is their thermal expansion mismatch with the substrate alloys; for which a temperature‐dependent coefficient of thermal expansion database is created. By combining tape casting method with the UHS technique a high‐throughput synthesis of single and multi‐layer coatings are realized with different compositions, layer stacking sequences, and layer thicknesses. To evaluate the coatings, thermal cycling tests from room temperature to 1300 °C are conducted. The approach enabled coatings on objects with complex geometries, multi‐layer ETBCs, and porosity tailoring by using staged UHS that runs with different temperatures and durations. The fast iteration strategy is more cost‐effective for the screening of ETBCs compared to conventional methods and greater throughput which can be further extended for rapid optimization of other materials systems.

Xie, Hua↗

High‐Throughput Evaluation of Hardening Coefficients of Eight Alloying Elements in Magnesium

Liquid–solid diffusion couples (LSDCs) are employed to generate a composition gradient in the single‐phase hexagonal closed‐packed (hcp) solid solution with compositions up to the solubility limit of various solutes in Mg. Nanoindentation scanning across the composition gradient in LSDCs allows effective evaluation of composition‐dependent hardness of eight alloying elements (Al, Ca, Ce, Gd, Li, Sn, Y, and Zn) in the hcp Mg phase. The hardening coefficients, an indicator of the potency of solid‐solution hardening, are evaluated from the measured composition‐hardness data and correlated with various materials properties such as atomic radius, shear modulus, and elastic modulus of the solutes. The rank of hardening potency of Al, Gd, Sn, Y, and Zn measured by nanoindentation is in good agreement with that measured by microindentation reported in the literature. The hardening coefficient (potency) from the strongest to the weakest is Ce > Ca > Y ≈ Gd > Zn > Al ≈ Sn > Li in Mg‐based hcp binary solid solutions. The hardening coefficient is found to be closely correlated with the strengthening potency.

36 MATERIALS SCIENCE↗

A comprehensive diffusion mobility database comprising 23 elements for magnesium alloys

We report that reliable experimental diffusion coefficients of 10 key alloying elements in Mg obtained by the present authors together with experimental data in the literature enabled us to perform a systematic test of the reliability of diffusion coefficients obtained from DFT calculations. The computed activation energy values were found to be quite accurate (mostly within 0.2 eV) but the computed pre-factors were less reliable. Such insights allowed us to develop a practical and yet robust strategy to perform diffusion mobility assessments by adopting the computed activation energy while fitting only the pre-factor when available experimental data are limited to a narrow temperature range. The overall good agreement between the DFT data and experimental data also gave us the confidence to employ the computed data for those that were still missing or inaccessible from experimental measurements. A systematic assessment of both the measured and computed diffusion data in hcp Mg was performed using the above holistic approach to yield the most comprehensive open Mg mobility database to date, comprising 23 elements (Mg, Ag, Al, Be, Ca, Cd, Ce, Cu, Fe, Ga, Gd, In, La, Li, Mn, Nd, Ni, Pu, Sb, Sn, U, Y, Zn). This more reliable mobility database will contribute to future development of advanced Mg alloys. The holistic approach developed in this study will be very beneficial to the future establishment of reliable mobility databases for other alloy systems as well.

36 MATERIALS SCIENCE↗

Pulsed laminar falling films in vertical tubes: Maintaining a continuous liquid film with reduced film thickness

Falling-liquid-film heat transfer is important to a wide variety of industrial applications, including two-phase thermosyphons, falling-film evaporators in the food industry, heat exchangers in fuel-ethanol processing, and the chemical service industry. Particularly for laminar falling films, the heat transfer increases as the film thickness decreases, hence it is desirable to keep the films as thin as possible. This article presents a periodically-pulsed flow concept to reduce the average mass flow inside a vertical tube. The technique provides thinner films than can be achieved with continuous flow. A drainage model is adopted to predict the film thickness as a function of flow rate and location along the tube. The concept is confirmed experimentally by measuring the film thickness in real time in a circular tube using a laser-based absorption technique. A new heat-transfer-based film continuity measurement is also integrated into the optical film measurement setup. Water at ambient temperature and pressure is used for this work. Film thickness reductions of up to 60%, and liquid-film volume-flow reductions of up to 80% compared to the minimum continuous-flow film have been obtained. The time-varying film thickness profile can also be controlled to a limited extent, which may be of interest for process industries.

42 ENGINEERING↗

Structure-property relationship of graphene coupled metal (Ni, Co, Fe) (oxy)hydroxides for efficient electrochemical evolution of oxygen

Design of high-efficiency electrocatalysts for the oxygen evolution reaction (OER) is critical to meet future energy demands. A series of heterogeneous electrocatalysts based on graphene coupled mixed-metal (oxy)hydroxides containing specific concentrations of nickel, cobalt, and iron were synthesized to investigate the influence of metal composition on the structure, properties, and activities for OER. The addition of iron led to isolated metal (oxy)hydroxide sheets from a few hundred nanometers to less than 5 nm, leading to a high surface area. The increased d -spacing between layers of hydroxide and abundant hydroxyl groups adsorbed on the surface of the electrocatalysts contribute to better catalytic performance as displayed by the remarkable improvement in Tafel slopes. In addition, the presence of cobalt and nickel can aid in lowering the onset potential of OER. Small amounts of iron in NiFe and NiCoFe systems were found to significantly decrease the overpotential. The best OER electrocatalysts of the series were obtained for the ternary metal hydroxide of composition Ni 0.33 Co 0.34 Fe 0.33 , which generates a low overpotential of 0.332 V in reaching 10 mA cm -1 in 0.1 M KOH and the Tafel slope is as low as 51 mV dec -1 . Density functional theory calculations demonstrate the improvements of electronic structure and free energy changes of the ternary metal oxyhydroxide for more efficient OER electrocatalysis. Altogether, this work provides a solid foundation for further development of high-efficiency, scalable, and cost-effective mixed-metal (oxy)hydroxide electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

“Self-heating” enabled one-pot synthesis of fluorescent carbon dots

Instead of using traditional external heating treatment methods, a facile heating equipment-free method is developed for one-pot synthesis of fluorescent carbon dots (CDs) via exothermic crosslinking reaction enabled “self-heating” and further induced high degree of carbonization. The obtained CDs exhibit strong blue fluorescence and are well characterized through a series of advanced analysis, including their optical properties, surface morphology, and chemical compositions. The corresponding synthesis mechanism is also disscussed and proposed. Moreover, the as-synthesized carbon dots have been successfully applied for selective Fe 3+ detection as a simple demonstration. Fe 3+ can significantly quench the fluorescence signal of CDs, whereas other metal ions show insignificant effect on their fluorescence intensity. The quenching performance is ascribed to synergistic effect of electrostatic interaction between ferric ions and the fluorescent CDs as well as interaction induced electron transfer. Here, this study expands the cutting edge of simple synthesis of fluorescent CDs, where CDs hold great promises in sensing applications.

42 ENGINEERING↗

Synthesis of Large Mesoporous–Macroporous and High Pore Volume, Mixed Crystallographic Phase Manganese Oxide, Mn 2 O 3 /Mn 3 O 4 Sponge

The controlled synthesis of mixed crystallographic phase Mn 2 O 3 /Mn 3 O 4 sponge material by varying heating rates and isothermal segments provides valuable information about the morphological and physical properties of the obtained sample. The well-characterized Mn 2 O 3 /Mn 3 O 4 sponge and applicability of difference in reactivity of H 2 and CO 2 desorbed during the synthesis provide new developments in the synthesis of metal oxide materials with unique morphological and surface properties. Here, we report the preparation of a Mn 2 O 3 /Mn 3 O 4 sponge using a metal nitrate salt, water, and Dextran, a biopolymer consisting of glucose monomers. The Mn 2 O 3 /Mn 3 O 4 sponge prepared at 1 °C·min –1 heating rate to 500 °C and held isothermally for 1 h consisted of large mesopores–macropores (25.5 nm, pore diameter) and a pore volume of 0.413 mL/g. Furthermore, the prepared Mn 2 O 3 /Mn 3 O 4 and 5 mol %–Fe-Mn 2 O 3 /Mn 3 O 4 sponges provide potential avenues in the development of solid-state catalyst materials for alcohol and amine oxidation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sensitive and Selective NH3 Monitoring at Room Temperature Using ZnO Ceramic Nanofibers Decorated with Poly(styrene sulfonate)

Ammonia (NH3) gas is a prominent air pollutant that is frequently found in industrial and livestock production environments. Due to the importance in controlling pollution and protecting public health, the development of new platforms for sensing NH3 at room temperature has attracted great attention. In this study, a sensitive NH3 gas device with enhanced selectivity is developed based on zinc oxide nanofibers (ZnO NFs) decorated with poly(styrene sulfonate) (PSS) and operated at room temperature. ZnO NFs were prepared by electrospinning followed by calcination at 500 °C for 3 h. The electrospun ZnO NFs are characterized to evaluate the properties of the as-prepared sensing materials. The loading of PSS to prepare ZnO NFs/PSS composite is also optimized based on the best sensing performance. Under the optimal composition, ZnO NFs/PSS displays rapid, reversible, and sensitive response upon NH3 exposure at room temperature. The device shows a dynamic linear range up to 100 ppm and a limit of detection of 3.22 ppm and enhanced selectivity toward NH3 in synthetic air, against NO2 and CO, compared to pure ZnO NFs. Additionally, a sensing mechanism is proposed to illustrate the sensing performance using ZnO NFs/PSS composite. Therefore, this study provides a simple methodology to design a sensitive platform for NH3 monitoring at room temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Gd substitution on the structural, magnetic, and magnetocaloric properties of HoCrO 3

Rare-earth chromites are a novel type of magnetoelectric multiferroics. Here, a Ho 0.33 Gd 0.67 CrO 3 powder sample was synthesized via a citrate route, and the structural properties were characterized by X-ray diffraction, scanning electron microscopy, and the Raman technique. The UV-Visible optical absorbance spectra were also measured in the wavelength range of 200–800 nm. The valence state of Cr was found to be purely 3+ according to the X-ray photoelectron spectroscopy. The temperature-dependent dielectric constant and loss tangent data measured between the frequencies of 1 kHz and 1 MHz show no anomalies around the magnetic transition temperature of the material. The dc magnetization measurements show that the ordering temperature of Cr 3+ ( T N C r ) is 155 K for Ho 0.33 Gd 0.67 CrO 3 , which is larger than 140 K for HoCrO 3 . The positive slope of the Arrott plots from 0 T to 7 T reveals that the antiferromagnetic-paramagnetic phase transition is second-order in nature. At a field of 7 T, the Ho 0.33 Gd 0.67 CrO 3 sample showed a giant magnetocaloric entropy change, -ΔS, of ~23.3 J/kg K at 5 K, and a refrigeration capacity of ~481.2 J/kg, which are much higher than those of pure bulk HoCrO 3 . This renders this material prospective for magnetic refrigeration in the low temperature (<30 K) range.

36 MATERIALS SCIENCE↗

TiO 2 Supported gold–palladium catalyst for effective syngas production from methane partial oxidation

The CO and H 2 (syngas) production from methane partial oxidation (MPO) using TiO 2 supported Au-Pd bimetallic catalysts are discussed. The supported Au, Pd and Au-Pd bimetallic nanoparticles were prepared by an incipient wetness impregnation or co-impregnation method and were characterized. The supported Au-Pd catalyst was selective for reforming and was more active compared to bare TiO 2 , TiO 2 supported Au only, or Pd only catalysts. The catalyst properties before and after MPO reaction were investigated, including the stability of the TiO 2 support, and the stability of Au and Pd nanoparticles. The supported Au-Pd catalyst has the highest TON (TON H2 = 23 at 650 °C), compared to supported Au catalyst (TON H2 < 1) and supported Pd catalyst (TON H2 < 1). Based on the analysis of outlet gases from the MPO reaction in a flow reactor, synergetic effects between Au and Pd, where Pd activates CH bonds while gold modulates the behavior of oxygen at the catalyst surface, are shown to contribute to MPO. Additionally, the Au-Pd/TiO 2 material shows long-term activity (>12 h) for the MPO reaction at 600 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pt/Ferric Hydroxyphosphate: An Effective Catalyst for the Selective Hydrogenation of α,β-Unsaturated Aldehydes (Ketones) into α,β-Unsaturated Alcohols

Four micro (nano)-sized mesoporous ferric hydroxyphosphates (FHP) are synthesized by a reverse microemulsion-solvothermal method, and then are used as supports to prepare supported Pt catalysts. The mean particle diameter of Pt nanoparticles (NPs) was 4.5–4.6 nm. When the four different Pt/FHP catalysts were used into the hydrogenation of α,β-unsaturated aldehydes (ketones) to their corresponding unsaturated alcohols, Pt/FHP (c) catalyst showed better catalytic performance than the other three partners. Under the optimal experimental conditions, several tested α,β-unsaturated aldehydes could be effectively transformed into corresponding unsaturated alcohols over Pt/FHP (c) catalyst. The catalyst could be recycled and reused several times without activity loss. We propose the stronger interaction between the Pt NPs and ferric ions of the FHP (c) are responsible for its good catalytic performance, and this stronger interaction should be rooted in its enhanced Lewis acid strength.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗