Engineering Papers⌕ Search

Engineering topics

Zhang, Yihe

Publications and source records attributed to Zhang, Yihe.

Bi2O2(OH)NO3/AgI heterojunction with enhanced UV and visible-light responsive photocatalytic activity and mechanism investigation

Highlights: • Bi{sub 2}O{sub 2}(OH)NO{sub 3}/AgI heterojunction is obtained by in-situ crystallization method. • It shows a higher degradation activity than Bi{sub 2}O{sub 2}(OH)NO{sub 3} and AgI under UV light. • It shows a higher catalytic activity than Bi{sub 2}O{sub 2}(OH)NO{sub 3} and AgI under visible light. • Enhanced charge separation is responsible for the enhanced degradation activity. - Abstract: Fabricating heterojunction between a wide-band-gap semiconductor and a narrow-band-gap semiconductor has become an important strategy to simultaneously improve the photoabsorption and charge separation. In this work, a new heterojunction photocatalyst Bi{sub 2}O{sub 2}(OH)NO{sub 3}/AgI was prepared through a facile in-situ crystallization method under ambient atmosphere. The crystal morphology, surface structure and element distribution were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray (EDX) mapping and X-ray photoelectron spectroscopy (XPS). Compared with the pristine Bi{sub 2}O{sub 2}(OH)NO{sub 3} and AgI, Bi{sub 2}O{sub 2}(OH)NO{sub 3}/AgI shows much enhanced degradation performance for eliminating MO regardless of UV or visible light. Photocurrent, electrochemical impedance spectra (EIS) and photoluminescence (PL) demonstrated that the enhanced photocatalytic activity is ascribed to the greatly promoted charge separation and transfer resulted from the matchable band energy levels of Bi{sub 2}O{sub 2}(OH)NO{sub 3} and AgI, favoring the formation of heterojunction. In addition, according to the active species trapping experiment, the main active species are superoxide radicals (O{sub 2}{sup −}) and holes (h{sup +}) during the degradation process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nature-Derived Approach to Oxygen and Chlorine Dual-Vacancies for Efficient Photocatalysis and Photoelectrochemistry

Crystal defect engineering has sparked huge interests owing to their significance for tailoring surface properties, photoelectronic properties, etc. However, conventional methods, e.g., H 2 reduction, can only achieve a single type of vacancy and always suffer from the drawbacks of harsh synthetic condition, complex procedure, and energy consuming. In this paper, we report a green, cost-effective, and scalable nature-derived reduction protocol with extracting solution of green tea and spinach to in situ achieve oxygen and chlorine dual-vacancies in BiOCl (BiO 1– x Cl 1- y ). The introduction of O and Cl vacancies gives rise to enormous amelioration on the crystal structure, electronic band structure, and surface state, thereby resulting in enhanced photoabsorption and a remarkably enhanced surface charge transfer efficiency (11-fold enhancement). Profiting from these merits, BiO 1– x Cl 1– y exhibits highly promoted photocatalytic oxidation ability and an efficient activity for selective CO 2 reduction into CO. Interestingly, continuously adjustable photoresponse and defect level for BiO 1– x Cl 1– y was realized by simply regulating the extract concentration, which can well balance photoabsorption and photoredox driving force. The current synthetic route is demonstrated to be also applicable to BiOBr and BiOI. To verify the role of the current natural antioxidant, BiO 1– x Cl 1– y is also successfully synthesized by the chemicals of extracting solution ingredients. This work exclusively sheds new light on engineering crystal defects via the eco-friendly bioinspired tactics and also provides a reference for promoting photo (electro) chemical property by dual-vacancies cooperation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-unit-cell layer established Bi 2 WO 6 3D hierarchical architectures: Efficient adsorption, photocatalysis and dye-sensitized photoelectrochemical performance

Single-layer catalysis sparks huge interests and gains widespread attention owing to its high activity. Simultaneously, three-dimensional (3D) hierarchical structure can afford large surface area and abundant reactive sites, contributing to high efficiency. Herein, we report an absorbing single-unit-cell layer established Bi2WO6 3D hierarchical architecture fabricated by a sodium dodecyl benzene sulfonate (SDBS)-assisted assembled strategy. The DBS- long chains can adsorb on the (Bi2O2)2+ layers and hence impede stacking of the layers, resulting in the single-unit-cell layer. We also uncovered that SDS with a shorter chain is less effective than SDBS. Due to the sufficient exposure of surface O atoms, single-unit-cell layer 3D Bi2WO6 shows strong selectivity for adsorption on multiform organic dyes with different charges. Remarkably, the single-unit-cell layer 3D Bi2WO6 casts profoundly enhanced photodegradation activity and especially a superior photocatalytic H2 evolution rate, which is 14-fold increase in contrast to the bulk Bi2WO6. Systematic photoelectrochemical characterizations disclose that the substantially elevated carrier density and charge separation efficiency take responsibility for the strengthened photocatalytic performance. Additionally, the possibility of single-unit-cell layer 3D Bi2WO6 as dye-sensitized solar cells (DSSC) has also been attempted and it was manifested to be a promising dye-sensitized photoanode for oxygen evolution reaction (ORR). Our work not only furnish an insight into designing single-layer assembled 3D hierarchical architecture, but also offer a multi-functional material for environmental and energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Liquid-Phase Exfoliation into Monolayered BiOBr Nanosheets for Photocatalytic Oxidation and Reduction

Monolayered photocatalytic materials have attracted huge research interests in terms of their large specific surface area and ample active sites. Sillén-structured layered BiOX (X = Cl, Br, I) casts great prospects owing to their strong photo-oxidation ability and high stability. Fabrication of monolayered BiOX by a facile, low-cost, and scalable approach is highly challenging and anticipated. In this paper, we describe the large-scale preparation of monolayered BiOBr nanosheets with a thickness of ~0.85 nm via a readily achievable liquid-phase exfoliation strategy with assistance of formamide at ambient conditions. The as-obtained monolayered BiOBr nanosheets are allowed diverse superiorities, such as enhanced specific surface area, promoted band structure, and strengthened charge separation. Profiting from these benefits, the advanced BiOBr monolayers not only show excellent adsorption and photodegradation performance for treating contaminants, but also demonstrate a greatly promoted photocatalytic activity for CO 2 reduction into CO and CH 4 . Additionally, monolayered BiOI nanosheets have also been obtained by the same synthetic approach. Our work offers a mild and general approach for preparation of monolayered BiOX, and may have huge potential to be extended to the synthesis of other single-layer two-dimensional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient visible-light photocatalytic performance of cuprous oxide porous nanosheet arrays

Graphical Abstract: We demonstrated a facile and efficient process for fabricating Cu{sub 2}O porous nanosheet arrays on Cu mesh. Benefiting from the 1D array structure and porous structure, the as-prepared Cu{sub 2}O sample exhibited significantly improved photocatalytic activity for methyl orange degradation under visible light irradiation. - Highlights: • Cu{sub 2}O porous nanosheet arrays on Cu mesh were synthesized via the facile and efficient process. • The Cu{sub 2}O sample exhibited the 1D array structure and porous nanosheet morphology. • The as-prepared Cu{sub 2}O porous nanosheet arrays exhibited significantly improved photocatalytic activity. - Abstract: One-dimensional nanostructures are of great interest for a wide range of applications. In this work, we demonstrated the fabrication of visible-light-responsive Cu{sub 2}O porous nanosheet arrays. The synthesis involved the growth of Cu(OH){sub 2} nanosheet arrays on Cu mesh by solution-based corrosion and thermal transformation of Cu(OH){sub 2} nanosheet to Cu{sub 2}O porous nanosheets on Cu mesh. Benefiting from the one dimensional array structure and porous structure, the as-prepared Cu{sub 2}O porous nanosheet arrays exhibited significantly improved photocatalytic activity for methyl orange degradation under visible light irradiation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A novel Bi-based oxybromide SrBiO{sub 2}Br: Synthesis, optical property and photocatalytic activity

Highlights: • SrBiO{sub 2}Br was first explored as a novel photocatalyst. • SrBiO{sub 2}Br has been successfully synthesized by a solid state reaction. • We systematically synthesized SrBiO{sub 2}Br in different temperature. • SrBiO{sub 2}Br calcinated at 700 °C exhibited the highest photocatalytic activity. - Abstract: A novel Bi-based photocatalyst SrBiO{sub 2}Br with layered structure was successfully synthesized via a solid state reaction method. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV–vis diffuse reflectance spectra (DRS). SrBiO{sub 2}Br has an indirect-transition optical band-gap of 2.58 eV. Density functional calculations revealed that conduction band (CB) were composed of the Bi 6p and Br 4s orbitals, and valence band (VB) were occupied by Br 4p and O 2p. The photodecomposition of rhodamine-B (RhB) experiments demonstrated SrBiO{sub 2}Br can be used as photocatalysts under ultraviolet (UV) light and visible light irradiation (λ > 400 nm). The results revealed that SrBiO{sub 2}Br calcinated at 700 °C exhibited the highest photocatalytic activity among the obtained SrBiO{sub 2}Br samples.

36 MATERIALS SCIENCE↗

Novel Y doped Bi{sub 2}WO{sub 6} photocatalyst: Hydrothermal fabrication, characterization and enhanced visible-light-driven photocatalytic activity for Rhodamine B degradation and photocurrent generation

Visible-light-driven (VLD) Yttrium (Y) ion doped Bi{sub 2}WO{sub 6} photocatalyst has been synthesized via a facile hydrothermal route. Incorporation of Y{sup 3} {sup +} into Bi{sub 2}WO{sub 6} lattice was successfully confirmed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and ICP analysis. The microstructure and optical property of the as-prepared samples have been characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption–desorption isotherm and UV–vis diffuse reflectance spectra (DRS). The photocatalytic experiments indicated that the Y-Bi{sub 2}WO{sub 6} showed a much higher photocatalytic activity than the pristine Bi{sub 2}WO{sub 6} for the degradation of Rhodamine B (RhB) and photocurrent (PC) generation. This enhancement should be ascribed to the slightly increased band gap and the generated defects by Y{sup 3} {sup +} doping, thus resulting in a much lower recombination rate of the photoinduced electrons and holes. Such a process was verified by the photoluminescence (PL) spectroscopy. In addition, the active species trapping experiments indicated that holes (h{sup +}) and superoxide radicals (·O{sub 2}{sup −}) play important roles in the photocatalytic reaction. - Highlights: • Novel Y-Bi{sub 2}WO{sub 6} photocatalyst has been synthesized by a facile hydrothermal route. • Y-Bi{sub 2}WO{sub 6} exhibits a much higher photocatalytic activity than pristine Bi{sub 2}WO{sub 6}. • Holes (h{sup +}) and superoxide radicals (·O{sub 2}{sup −}) are the two main active species. • Y{sup 3} {sup +} ion can result in a low recombination of photogenerated electron and hole.

36 MATERIALS SCIENCE↗

MBiO{sub 2}Cl (M=Sr, Ba) as novel photocatalysts: Synthesis, optical property and photocatalytic activity

Novel quaternary photocatalysts MBiO{sub 2}Cl (M=Sr, Ba) have been successfully developed for efficient photodecomposition of RhB. Their photocatalytic mechanism was also investigated. - Highlights: • Two Bi-based compounds SrBiO{sub 2}Cl and BaBiO{sub 2}Cl were explored as photocatalysts. • They were successfully synthesized by a solid-state reaction. • RhB can be effectively photodecomposed by SrBiO{sub 2}Cl and BaBiO{sub 2}Cl under UV light. • ·OH radicals serving as active species play important roles in degradation process. - Abstract: Two Bi-based compounds SrBiO{sub 2}Cl and BaBiO{sub 2}Cl were successfully synthesized by a solid-state reaction and investigated as new photocatalysts for the first time. Their microstructures and optical properties were characterized by XRD, SEM and DRS. The band gaps of SrBiO{sub 2}Cl and BaBiO{sub 2}Cl were separately determined to be 3.52 and 3.71 eV, and their E{sub CB} and E{sub VB} were also estimated. The photocatalytic activities of the as-prepared samples were evaluated by photodecomposition of rhodamine B (RhB) in aqueous solution. The results revealed that both SrBiO{sub 2}Cl and BaBiO{sub 2}Cl can be used as effective photocatalysts under UV irradiation, and SrBiO{sub 2}Cl exhibits a higher photocatalytic activity than BaBiO{sub 2}Cl, which was also verified by the PL spectra. Terephthalic acid photoluminescence probing technique (TA-PL) demonstrated that ·OH radicals serving as active species play an important role in photooxidative degradation of RhB over SrBiO{sub 2}Cl and BaBiO{sub 2}Cl. Moreover, a larger amount of ·OH radicals generation was observed over SrBiO{sub 2}Cl, which is in agreement with its higher photocatalytic activity.

36 MATERIALS SCIENCE↗

Controlled fabrication and tunable photoluminescence properties of Mn{sup 2+} doped graphene–ZnO composite

Highlights: • Graphene–ZnO composites were synthesized by a mixed solvothermal method. • ZnO quantum dots are distributed uniformly on the graphene sheets. • A possible hypothesis is raised for the influence of graphene oxide on the nucleation of ZnO. • Mn{sup 2+} doped graphene–ZnO composites were fabricated and the emission spectra can be tuned by doping. - Abstract: Graphene–ZnO composites (G–ZnO) with controlled morphology and photoluminescence property were synthesized by a mixed solvothermal method. Mixed solvent were composed by dimethyl sulfoxide and ethylene glycol. Fourier transform infrared spectroscopy, transmission electron microscopy and photoluminescence spectra were used to characterize G–ZnO. Graphene as a substrate can help the distribution and the dispersity of ZnO, and a possible model of the interaction between graphene oxide and ZnO particles is proposed. At the same time, graphene also reduce the size of ZnO particles to about 5 nm. Furthermore, Mn{sup 2+} ions dopes G–ZnO successfully by the mixed solvothermal synthesis and the doping of Mn{sup 2+} makes G–ZnO shift red from 465 nm to 548 nm and 554 nm in the emission spectrum. The changes of the emission spectrum by the adding of Mn{sup 2+} make G–ZnO have tunable photoluminescence spectrum which is desirable for practical applications.

36 MATERIALS SCIENCE↗

A novel Bi-based phosphomolybdate photocatalyst K{sub 2}Bi(PO{sub 4})(MoO{sub 4}): Crystal structure, electronic structure and photocatalytic activity

Graphical abstract: - Highlights: • A new type of phosphomolybdate K{sub 2}Bi(PO{sub 4})(MoO{sub 4}) photocatalyst was successfully synthesized. • The products synthesized at 600 °C were mainly composed of nano-cubes. • The indirect band gap of K{sub 2}Bi(PO{sub 4})(MoO{sub 4}) has been determined to be 2.93 eV. • K{sub 2}Bi(PO{sub 4})(MoO{sub 4}) synthesized at 600 °C exhibits the highest photocatalytic activity. • The electronic structure was calculated by density functional calculations. - Abstract: A novel phosphomolybdate photocatalyst K{sub 2}Bi(PO{sub 4})(MoO{sub 4}) has been successfully developed via a solid-state reaction. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), diffuse reflectance spectrum (DRS) and photoluminescence (PL) spectra. The photocatalytic activities of the samples prepared at different temperature were determined by the photooxidative decomposition of methylene blue (MB) in aqueous solution. The results revealed that K{sub 2}Bi(PO{sub 4})(MoO{sub 4}) can be used as an effective photocatalyst under UV–vis irradiation and the nanocubes obtained at 600 °C exhibits the highest photocatalytic activity. The photodegradation of MB by K{sub 2}Bi(PO{sub 4})(MoO{sub 4}) nanocrystals followed the first-order kinetics. Theoretical calculations on electronic structure confirmed the indirect optical transitions property in the absorption edge region of K{sub 2}Bi(PO{sub 4})(MoO{sub 4}), and the orbital constitutions of CB and VB were also analyzed.

36 MATERIALS SCIENCE↗

Magnetization-induced enhancement of photoluminescence in core-shell CoFe{sub 2}O{sub 4}@YVO{sub 4}:Eu{sup 3+} composite

After the core-shell CoFe{sub 2}O{sub 4}@YVO{sub 4}:Eu{sup 3+} composite synthesized through a facile sol-gel method was magnetized under an external magnetic field of 0.25 T for 4 h, an enhancement of ∼56% in photoluminescence intensity was observed. The remanent magnetization of the CoFe{sub 2}O{sub 4} core increases the intensity of the excited charge transfer transition of VO{sub 4}{sup 3−} group in YVO{sub 4}:Eu{sup 3+} shell, which may enhance the probability related to the Eu{sup 3+} radiative transition {sup 5}D{sub 0}-{sup 7}F{sub 2}, yielding to a high photoluminescence. The obvious remanent-magnetization-induced enhancement in photoluminescence is helpful in developing excellent magnetic/luminescent material for the practical display devices.

36 MATERIALS SCIENCE↗

Semiorganic nonlinear optical material: Crystal growth, structure and optical properties of NaB(L-C{sub 4}H{sub 4}O{sub 5}){sub 2}

Graphical abstract: - Highlights: • Semiorganic NLO material NaB(L-C{sub 4}H{sub 4}O{sub 5}){sub 2} has been grown with sizes up to 8 × 5 × 2 mm{sup 3}. • It crystallizes in the noncentrosymmetric Monoclinic space group P2. • Thermal analysis demonstrated NaB(L-C{sub 4}H{sub 4}O{sub 5}){sub 2} are thermally stable up to 280. • NaB(L-C{sub 4}H{sub 4}O{sub 5}){sub 2} has an absorption edge about 220 nm in the UV region. • It exhibits a NLO efficiency of about two times that of KDP (KH{sub 2}PO{sub 4}) standard. - Abstract: Single crystal of the semiorganic NLO material NaB(L-C{sub 4}H{sub 4}O{sub 5}){sub 2} has been grown with sizes up to 8 × 5 × 2 mm{sup 3} by the slow evaporation method. The crystal structure of this compound was determined by single crystal X-ray diffraction. It crystallizes in the Monoclinic space group P2 with lattice parameters a = 5.4045(11) Å, b = 11.692(2) Å, c = 9.4773(19) Å and Z = 2. Thermal analysis demonstrated NaB(L-C{sub 4}H{sub 4}O{sub 5}){sub 2} are thermally stable up to 280 °C. NaB(L-C{sub 4}H{sub 4}O{sub 5}){sub 2} exhibits an absorption edge about 220 nm in the UV region. The powder second-harmonic generation (SHG) measurement performed on the ground crystal indicates that it has a NLO efficiency of about 2 times that of KDP (KH{sub 2}PO{sub 4}) standard. In addition, the origin of stronger SHG effect was discussed.

36 MATERIALS SCIENCE↗