Observation of mirror-odd and mirror-even spin texture in ultrathin epitaxially strained RuO2 films
Explore the source record for details and available documents.
36 MATERIALS SCIENCE↗
Engineering topics
Zhang, Yichen
Publications and source records attributed to Zhang, Yichen.
Persistent flat band splitting and strong selective band renormalization in a kagome magnet thin film
Magnetic kagome materials provide a fascinating playground for exploring the interplay of magnetism, correlation and topology. Many magnetic kagome systems have been reported including the binary Fe m X n (X = Sn, Ge; m:n = 3:1, 3:2, 1:1) family and the rare earth RMn 6 Sn 6 (R = rare earth) family, where their kagome flat bands are calculated to be near the Fermi level in the para magnetic phase. While partially filling a kagome flat band is predicted to give rise to a Stoner-type ferromagnetism, experimental visualization of the mag netic splitting across the ordering temperature has not been reported for any of these systems due to the high ordering temperatures, hence leaving the nature of magnetism in kagome magnets an open question. Here, we probe the electronic structure with angle-resolved photoemission spectroscopy in a kagome magnet thin film FeSn synthesized using molecular beam epitaxy. We identify the exchange-split kagome flat bands, whose splitting persists above the magnetic ordering temperature, indicative of a local moment picture. Such local moments in the presence of the topological flat band are consistent with the compact molecular orbitals predicted in theory. We further observe a large spin-orbital selective band renormalization in the Fe d xy + d x 2 -y 2 spin majority channel reminiscent of the orbital selective correlation effects in the iron based superconductors. Our discovery of the coexistence of local moments with topological flat bands in a kagome system echoes similar findings in magic-angle twisted bilayer graphene, and provides a basis for theoretical effort towards modeling correlation effects in magnetic flat band systems.
36 MATERIALS SCIENCE↗
New Safety Feedback Control Design to Guarantee Adequate Frequency Performance in Microgrids
Safety analysis of power systems is concerned with the system's ability to maintain critical variables within specified limits following a disturbance. Frequency control adequacy has become increasingly important as the system inertia decreases due to the increase in renewable energy penetration. Various controllers for inverters have been proposed to improve the system frequency response and few are capable to ensure the safety of the response. In this article, a diesel-wind energy system is considered and modeled as a switching system between normal, faulted, and post-fault modes. Further, a safety feedback controller is designed as a supplementary signal for a wind turbine generator such that the speed of the diesel generator stays within a permissible range in the presence of a finite energy disturbance. Numerical results on the modified 33-bus microgrid system obtained of the proposed novel approach indicate that the suggested control configuration can guarantee adequate frequency response without excessive conservativeness.
barrier function↗
Towards Non-Intrusive Real-Time Monitoring of Behind the Meter Residential Distributed Energy Resources
The growing adoption of residential distributed energy resources (DERs) introduces more uncertain variability in power grid operation. More importantly, the residential DERs operate behind customers’ energy meters, and therefore, the utility cannot “directly” monitor them. Prior approaches to enable visibility into behind-the-meter (BTM) DERs either depend on estimations or require intrusive instrumentation on the customer side. To address the critical need for direct real-time monitoring of BTM DERs, in this paper, we propose a novel approach for utility-side direct real-time monitoring of residential BTM DERs. We utilize high-frequency (> 10kHz) conducted electromagnetic interference (EMI) from residential DERs’ grid-tied inverters to monitor their power generation. We discuss the working principle of our approach and present supporting results using three of-the-shelf grid-tied inverters.
14 SOLAR ENERGY↗
Tailoring physical properties of crystals through synthetic temperature control: A case study for new polymorphic NbFeT e 2 phases
Growth parameters play a significant role in the crystal quality and physical properties of layered materials. Here we present a case study on a van der Waals magnetic NbFeTe 2 material. Two different types of polymorphic NbFeTe 2 phases, synthesized at different temperatures, display significantly different behaviors in crystal symmetry, electronic structure, electrical transport, and magnetism. While the phase synthesized at low temperature showing behavior consistent with previous reports, the new phase synthesized at high temperature, has completely different physical properties, such as metallic resistivity, long-range ferromagnetic order, anomalous Hall effect, negative magnetoresistance, and distinct electronic structures. Neutron diffraction reveals out-of-plane ferromagnetism below 70 K, consistent with the electrical transport and magnetic susceptibility studies. Finally, our work suggests that simply tuning synthetic parameters in a controlled manner could be an effective route to alter the physical properties of existing materials potentially unlocking new states of matter, or even discovering new materials.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Nanoscale visualization and spectral fingerprints of the charge order in ScV 6 Sn 6 distinct from other kagome metals
Charge density waves (CDWs) in kagome metals have been tied to many exotic phenomena. Here, using spectroscopic-imaging scanning tunneling microscopy and angle-resolved photoemission spectroscopy, we study the charge order in kagome metal ScV 6 Sn 6 . The similarity of electronic band structures of ScV 6 Sn 6 and TbV 6 Sn6 (where charge ordering is absent) suggests that charge ordering in ScV 6 Sn 6 is unlikely to be primarily driven by Fermi surface nesting of the Van Hove singularities. In contrast to the CDW state of cousin kagome metals, we find no evidence supporting rotation symmetry breaking. Differential conductance dI/dV spectra show a partial gap Δ 1 CO ≈ 20 meV at the Fermi level. Interestingly, dI/dV maps reveal that charge modulations exhibit an abrupt phase shift as a function of energy at energy much higher than Δ 1 CO , which we attribute to another spectral gap. Our experiments reveal a distinctive nature of the charge order in ScV 6 Sn 6 with fundamental differences compared to other kagome metals.
36 MATERIALS SCIENCE↗
Non-Fermi liquid behaviour in a correlated flat-band pyrochlore lattice
Electronic correlation effects are manifested in quantum materials when either the on-site Coulomb repulsion is large or the electron kinetic energy is small. The former is the dominant effect in cuprate superconductors and heavy-fermion systems whereas it is the latter in twisted bilayer graphene and geometrically frustrated metals. However, the simultaneous cooperation of both effects in the same quantum material remains rare. The design aim is to produce correlated topological flat bands pinned at the Fermi level. Here, we observe a flat band at the Fermi level in a 3d pyrochlore metal CuV 2 S 4 . Our angle-resolved photoemission spectroscopy data reveal that destructive quantum interference associated with the V pyrochlore sublattice and further renormalization to the Fermi level by electron interactions induce this flat band. Consequently, we discover transport signatures that evidence a deviation from Fermi liquid behaviour as well as an enhanced Sommerfeld coefficient. Our work illustrates the combined cooperation of local Coulomb interactions and geometric frustration in a pyrochlore lattice system to induce correlated topology by constructing and pinning correlated flat bands near the Fermi level.
36 MATERIALS SCIENCE↗
Charge order induced Dirac pockets in the nonsymmorphic crystal TaTe 4
The interplay between charge order (CO) and nontrivial band topology has spurred tremendous interest in understanding topological excitations beyond the single-particle description. In a quasi-one-dimensional nonsymmorphic crystal TaTe 4 , the (2a×2b×3c) charge ordered ground state drives the system into a space group where the symmetry indicator features the emergence of Dirac fermions and unconventional double Dirac fermions. In this study, using angle-resolved photoemission spectroscopy and first-principles calculations, we provide evidence of the CO induced Dirac fermion-related bands near the Fermi level. Furthermore, the band folding at the Fermi level is compatible with the new periodicity dictated by the CO, indicating that the electrons near the Fermi level follow the crystalline symmetries needed to host double Dirac fermions in this system.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Weyl nodal ring states and Landau quantization with very large magnetoresistance in square-net magnet EuGa 4
Magnetic topological semimetals allow for an effective control of the topological electronic states by tuning the spin configuration. Among them, Weyl nodal line semimetals are thought to have the greatest tunability, yet they are the least studied experimentally due to the scarcity of material candidates. Here, using a combination of angle-resolved photoemission spectroscopy and quantum oscillation measurements, together with density functional theory calculations, we identify the square-net compound EuGa 4 as a magnetic Weyl nodal ring semimetal, in which the line nodes form closed rings near the Fermi level. The Weyl nodal ring states show distinct Landau quantization with clear spin splitting upon application of a magnetic field. At 2 K in a field of 14 T, the transverse magnetoresistance of EuGa 4 exceeds 200,000%, which is more than two orders of magnitude larger than that of other known magnetic topological semimetals. Our theoretical model suggests that the non-saturating magnetoresistance up to 40 T arises as a consequence of the nodal ring state.
36 MATERIALS SCIENCE↗
Kramers nodal lines and Weyl fermions in SmAlSi
Kramers nodal lines (KNLs) have recently been proposed theoretically as a special type of Weyl line degeneracy connecting time-reversal invariant momenta. KNLs are robust to spin orbit coupling and are inherent to all non-centrosymmetric achiral crystal structures, leading to unusual spin, magneto-electric, and optical properties. However, their existence in in real quantum materials has not been experimentally established. Here we gather the experimental evidence pointing at the presence of KNLs in SmAlSi, a non-centrosymmetric metal that develops incommensurate spin density wave order at low temperature. Using angle-resolved photoemission spectroscopy, density functional theory calculations, and magneto-transport methods, we provide evidence suggesting the presence of KNLs, together with observing Weyl fermions under the broken inversion symmetry in the paramagnetic phase of SmAlSi. We discuss the nesting possibilities regarding the emergent magnetic orders in SmAlSi. Our results provide a solid basis of experimental observations for exploring correlated topology in SmAlSi.
36 MATERIALS SCIENCE↗
Climate change increases carbon allocation to leaves in early leaf green-up
Global greening, characterized by an increase in leaf area index (LAI), implies an increase in foliar carbon (C). Whether this increase in foliar C under climate change is due to higher photosynthesis or to higher allocation of C to leaves remains unknown. Here, we explored the trends in foliar C accumulation and allocation during leaf green-up from 2000 to 2017 using satellite-derived LAI and solar-induced chlorophyll fluorescence (SIF) across the Northern Hemisphere. The accumulation of foliar C accelerated in the early green-up period due to both increased photosynthesis and higher foliar C allocation driven by climate change. In the late stage of green-up, however, we detected decreasing trends in foliar C accumulation and foliar C allocation. Such stage-dependent trends in the accumulation and allocation of foliar C are not represented in current terrestrial biosphere models. Further, our results highlight that a better representation of C allocation should be incorporated into models.
54 ENVIRONMENTAL SCIENCES↗
Distributed Data-Driven Optimization for Voltage Regulation in Distribution Systems
Here, this paper proposes a distributed data-driven optimization framework for voltage regulation in distribution systems. The recursive kernel regression and alternating direction method of multipliers (ADMM) are selected to cover the system learning and distributed optimization tasks. The proposed distributed data-driven framework is capable of having a rapid response to system or load changes while considering the operation optimality. Besides, the distributed algorithm parallels the computation tasks and reduces the computational expense of a single agent. To validate the performance of the proposed method, a hypothetical 7-Bus system and the IEEE 123-Bus system are selected to show the effectiveness of the proposed data-driven framework. According to the numerical study results, the proposed method offers great flexibility for selecting customized kernel models for different regions and can effectively improve the system voltage profile in a distributed manner.
24 POWER TRANSMISSION AND DISTRIBUTION↗