Engineering Papers⌕ Search

Engineering topics

Zhang, Y

Publications and source records attributed to Zhang, Y.

At least 163 records · Page 9

SciDAC Advances in Beam Dynamics Simulation: From Light Sources to Colliders

In this paper, we report on progress that has been made in beam dynamics simulation, from light sources to colliders, during the first year of the SciDAC-2 accelerator project 'Community Petascale Project for Accelerator Science and Simulation (ComPASS).' Several parallel computational tools for beam dynamics simulation are described. Also presented are number of applications in current and future accelerator facilities (e.g., LCLS, RHIC, Tevatron, LHC, and ELIC). Particle accelerators are some of most important tools of scientific discovery. They are widely used in high-energy physics, nuclear physics, and other basic and applied sciences to study the interaction of elementary particles, to probe the internal structure of matter, and to generate high-brightness radiation for research in materials science, chemistry, biology, and other fields. Modern accelerators are complex and expensive devices that may be several kilometers long and may consist of thousands of beamline elements. An accelerator may transport trillions of charged particles that interact electromagnetically among themselves, that interact with fields produced by the accelerator components, and that interact with beam-induced fields. Large-scale beam dynamics simulations on massively parallel computers can help provide understanding of these complex physical phenomena, help minimize design cost, and help optimize machine operation. In this paper, we report on beam dynamics simulations in a variety of accelerators ranging from next generation light sources to high-energy ring colliders that have been studied during the first year of the SciDAC-2 accelerator project.

43 PARTICLE ACCELERATORS↗

Possible chiral bands in {sup 194}Tl

High spin states in {sup 194}Tl, excited through the {sup 181}Ta({sup 18}O,5n) fusion evaporation reaction, were studied using the AFRODITE array at iThemba LABS. Candidate chiral bands built on the {pi}h{sub 9/2} x {nu}i{sub 13/2}{sup 1} configuration were found. Furthermore these bands were observed through a band crossing caused by the excitation of a {nu}i{sub 13/2} pair. Above the band crossing the excitation energies remain close, suggesting that chirality may persist for the four quasiparticle configuration too.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Design of an ultra low power CMOS pixel sensor for a future neutron personal dosimeter

Despite a continuously increasing demand, neutron electronic personal dosimeters (EPDs) are still far from being completely established because their development is a very difficult task. A low-noise, ultra low power consumption CMOS pixel sensor for a future neutron personal dosimeter has been implemented in a 0.35 {mu}m CMOS technology. The prototype is composed of a pixel array for detection of charged particles, and the readout electronics is integrated on the same substrate for signal processing. The excess electrons generated by an impinging particle are collected by the pixel array. The charge collection time and the efficiency are the crucial points of a CMOS detector. The 3-D device simulations using the commercially available Synopsys-SENTAURUS package address the detailed charge collection process. Within a time of 1.9 {mu}s, about 59% electrons created by the impact particle are collected in a cluster of 4 x 4 pixels with the pixel pitch of 80 {mu}m. A charge sensitive preamplifier (CSA) and a shaper are employed in the frond-end readout. The tests with electrical signals indicate that our prototype with a total active area of 2.56 x 2.56 mm{sup 2} performs an equivalent noise charge (ENC) of less than 400 e - and 314 {mu}W power consumption, leading to a promising prototype. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Nano-engineered defect structures in Ce- and Ho-doped metal-organic chemical vapor deposited YBa{sub 2}Cu{sub 3}O{sub 3+{delta} }films : correlation of structure and chemistry with flux pinning performance.

This study reports on the fabrication of metal-organic chemical vapor deposited (MOCVD) YBa{sub 2}Cu{sub 3}O{sub 6+{delta}} (YBCO) films doped with varying amounts of Ce and Ho and the characterization of their electrical, microstructural, and chemical properties. The films are prepared by vapor phase deposition of a Y-Ba-Cu precursor mix containing controlled amounts of Ce and Ho onto buffered metal strip templates. The comprehensive characterization of these films by critical current measurement, transmission electron microscopy, x-ray diffraction, Raman microspectroscopy, and x-ray absorption spectroscopy provides detailed information about the structure/chemistry/performance relationships and how they vary with varying amounts of Ce and Ho in the YBCO films. The microstructure exhibited by both the Ce-doped and the Ho-doped films contains a high density of crystal basal-plane aligned, fluoritelike precipitates within the YBCO matrix. For optimally doped samples, the influence of these nanocrystalline phases on the flux pinning properties manifests itself as a significant improvement in the critical current density (J{sub c}) for magnetic field orientations that approach being parallel to the ab planes of the YBCO, while no appreciable change is observed in either self-field J{sub c} or applied-field J{sub c} performance in the vicinity of field orientations parallel to the YBCO c-axis. The Ce is almost exclusively concentrated in the fluoritelike nanoprecipitates, while the Ho incorporates into both the planar arrays of nanoprecipitates and the superconducting matrix, where it substitutes for Y in the YBCO lattice. The present findings for Ce and Ho doping are in interesting contrast with our prior findings for Zr-doped MOCVD films due to the fact that the Zr-doped films exhibit columnar precipitate arrays that produce a substantial improvement in J{sub c} for magnetic field orientations parallel to the YBCO c-axis, while no appreciable change is observed in either self-field or applied-field J{sub c} performance for field orientations parallel to the ab planes. These results suggest that improvement of the in-field J{sub c} of YBCO films over an extended range of field angles could be achieved by doping strategies that simultaneously produce both ab-plane aligned and c-axis aligned precipitate arrays.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Persistent contribution of unbound quasiparticles to the pair correlation in the continuum Skyrme-Hartree-Fock-Bogoliubov approach

The neutron pair correlation in nuclei near the neutron drip-line is investigated using the self-consistent continuum Skyrme-Hartree-Fock-Bogoliubov theory formulated with the coordinate-space Green's function technique. Numerical analysis is performed for even-even N=86 isotones in the Mo-Sn region, where the 3p{sub 3/2} and 3p{sub 1/2} orbits lying near the Fermi energy are either weakly bound or unbound. The quasiparticle states originating from the l=1 orbits form resonances with large widths, which are due to the low barrier height and the strong continuum coupling caused by the pair potential. Analyzing in detail the pairing properties and roles of the quasiparticle resonances, we found that the l=1 broad quasiparticle resonances persist to feel the pair potential and contribute to the pair correlation even when their widths are comparable with the resonance energy.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Diverse Structural and Magnetic Properties of Differently Prepared MnAs Nanoparticles

Discrete nanoparticles of MnAs with distinct magnetostructural properties have been prepared by small modifications of solution-phase arrested precipitation reactions. Rietveld and X-ray atomic pair distribution function based approaches were used to explore the evolution of the structure of the samples with temperature, and these data were compared to the magnetic response measured with ac susceptibility. Relative to a bulk standard, one type of MnAs nanoparticles was found to demonstrate similar but smaller structural transitions and corresponding magnetic changes. However, both magnetic and structural transitions in the second type of nanoparticles are strongly suppressed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cryogenic system for the Energy Recovery Linac and vertical test facility at BNL

A small cryogenic system and warm helium vacuum pumping system provides cooling to either the Energy Recovery Linac's (ERL) cryomodules that consist of a 5-cell cavity and an SRF gun or a large Vertical Test Dewar (VTD) at any given time. The cryogenic system consists of a model 1660S PSI piston plant, a 3800 liter storage dewar, subcooler, a wet expander, a 50 g/s main helium compressor, and a 170 m{sup 3} storage tank. A system description and operating plan of the cryogenic plant and cryomodules is given. The cryogenic system for ERL and the Vertical Test Dewar has a plant that can produce the equivalent of 300W at 4.5K with the addition of a wet expander 350 W at 4.5K. Along with this system, a sub-atmospheric, warm compression system provides pumping to produce 2K at the ERL cryomodules or the Vertical Test Dewar. The cryogenic system for ERL and the Vertical Test Dewar makes use of existing equipment for putting a system together. It can supply either the ERL side or the Vertical Test Dewar side, but not both at the same time. Double valve isolation on the liquid helium supply line allows one side to be warmed to room temperature and worked on while the other side is being held at operating temperature. The cryogenic system maintain the end loads from 4.4K to 2K or colder depending on capacity. Liquid helium storage dewar capacity allows ERL or the VTD to operate above the plant's capacity when required and ERL cryomodules ballast reservoirs and VTD reservoir allows the end loads to operate on full vacuum pump capacity when required.

43 PARTICLE ACCELERATORS↗

Cryogenic sub-system for the 56 MHz SRF storage cavity for RHIC

A 56 MHz Superconducting RF Storage Cavity is being constructed for the RHIC collider. This cavity is a quarter wave resonator that will be operated in a liquid helium bath at 4.4 K. The cavity requires an extremely quiet environment to maintain its operating frequency. The cavity, besides being engineered for a mechanically quiet system, also requires a quiet cryogenic system. The helium is taken from RHIC's main helium supply header at 3.5 atm, 5.3K at a phase separator tank. The boil-off is sent back to the RHIC refrigeration system to recover the cooling. To acoustically separate the RHIC helium supply and return lines, a condenser/boiler heat exchanger condenses the helium vapor generated in the RF cavity bath. A system description and operating parameters are given about the cryogen delivery system. The 56 MHz superconducting storage RF cavity project is making progress. The cryogenic system design is in its final stage. The helium supply lines have been tapped into the RHIC helium distribution lines. The plate-and-fin heat exchanger design is near completion and specification will be sent out for bid soon. The cold helium vapor heating system design will start soon as well. A booster compressor specification is underway. The first phase separator and transfer line design work is near completion and will be sent out for bid soon.

43 PARTICLE ACCELERATORS↗

Tailoring a two-dimensional electron gas at the LaAlO{sub 3}/SrTiO{sub 3} (001) interface by epitaxial strain.

Recently a metallic state was discovered at the interface between insulating oxides, most notably LaAlO{sub 3} and SrTiO{sub 3}. Properties of this two-dimensional electron gas (2DEG) have attracted significant interest due to its potential applications in nanoelectronics. Control over this carrier density and mobility of the 2DEG is essential for applications of these unique systems, and may be achieved by epitaxial strain. However, despite the rich nature of strain effects on oxide materials properties, such as ferroelectricity, magnetism, and superconductivity, the relationship between the strain and electrical properties of the 2DEG at the LaAlO{sub 3}/SrTiO{sub 3} heterointerface remains largely unexplored. Here, we use different lattice constant single-crystal substrates to produce LaAlO{sub 3}/SrTiO{sub 3} interfaces with controlled levels of biaxial epitaxial strain. We have found that tensile-strained SrTiO{sub 3} destroys the conducting 2DEG, while compressively strained SrTiO{sub 3} retains the 2DEG, but with a carrier concentration reduced in comparison to the unstrained LaAlO{sub 3}/SrTiO{sub 3} interface. We have also found that the critical LaAlO{sub 3} overlayer thickness for 2DEG formation increases with SrTiO{sub 3} compressive strain. Our first-principles calculations suggest that a strain-induced electric polarization in the SrTiO{sub 3} layer is responsible for this behavior. The polarization is directed away from the interface and hence creates a negative polarization charge opposing that of the polar LaAlO{sub 3} layer. This behavior both increases the critical thickness of the LaAlO{sub 3} layer, and reduces carrier concentration above the critical thickness, in agreement with our experimental results. Our findings suggest that epitaxial strain can be used to tailor 2DEGs properties of the LaAlO{sub 3}/SrTiO{sub 3} heterointerface.

36 MATERIALS SCIENCE↗

Niche of harmful alga Aureococcus anophagefferens revealed through ecogenomics

Harmful algal blooms (HABs) cause significant economic and ecological damage worldwide. Despite considerable efforts, a comprehensive understanding of the factors that promote these blooms has been lacking because the biochemical pathways that facilitate their dominance relative to other phytoplankton within specific environments have not been identified. Here, biogeochemical measurements demonstrated that the harmful alga Aureococcus anophagefferens outcompeted co-occurring phytoplankton in estuaries with elevated levels of dissolved organic matter and turbidity and low levels of dissolved inorganic nitrogen. We subsequently sequenced the first HAB genome (A. anophagefferens) and compared its gene complement to those of six competing phytoplankton species identified via metaproteomics. Using an ecogenomic approach, we specifically focused on the gene sets that may facilitate dominance within the environmental conditions present during blooms. A. anophagefferens possesses a larger genome (56 mbp) and more genes involved in light harvesting, organic carbon and nitrogen utilization, and encoding selenium- and metal-requiring enzymes than competing phytoplankton. Genes for the synthesis of microbial deterrents likely permit the proliferation of this species with reduced mortality losses during blooms. Collectively, these findings suggest that anthropogenic activities resulting in elevated levels of turbidity, organic matter, and metals have opened a niche within coastal ecosystems that ideally suits the unique genetic capacity of A. anophagefferens and thus has facilitated the proliferation of this and potentially other HABs.

58 GEOSCIENCES↗

Using the Choquet integral for screening geological CO2 storage sites

For geological CO{sub 2} storage site selection, it is desirable to reduce the number of candidate sites through a screening process before detailed site characterization is performed. Screening generally involves defining a number of criteria which then need to be evaluated for each site. The importance of each criterion to the final evaluation will generally be different. Weights reflecting the relative importance of these criteria can be provided by experts. To evaluate a site, each criterion must be evaluated and scored, and then aggregated, taking into account the importance of the criteria. We propose the use of the Choquet integral for aggregating the scores. The Choquet integral considers the interactions among criteria, i.e. whether they are independent, complementary to each other, or partially repetitive. We also evaluate the Shapley index, which demonstrates how the importance of a given piece of information may change if it is considered by itself or together with other available information. An illustrative example demonstrates how the Choquet integral properly accounts for the presence of redundancy in two site-evaluation criteria, making the screening process more defensible than the standard weighted-average approach.

54 ENVIRONMENTAL SCIENCES↗

Metallic and Insulating Oxide Interfaces Controlled by Electronic Correlations

The formation of two-dimensional electron gases (2DEGs) at complex oxide interfaces is directly influenced by the oxide electronic properties. We investigated how local electron correlations control the 2DEG by inserting a single atomic layer of a rare-earth oxide (RO) [RO is lanthanum (La), praseodymium (Pr), neodymium (Nd), samarium (Sm), or yttrium (Y)] into an epitaxial strontium titanate oxide (SrTiO{sub 3}) matrix using pulsed-laser deposition with atomic layer control. We find that structures with La, Pr, and Nd ions result in conducting 2DEGs at the inserted layer, whereas the structures with Sm or Y ions are insulating. Our local spectroscopic and theoretical results indicate that the interfacial conductivity is dependent on electronic correlations that decay spatially into the SrTiO{sub 3} matrix. Such correlation effects can lead to new functionalities in designed heterostructures.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

A Simplified 1-D Model for Calculating CO2 Leakage through Conduits

In geological CO{sub 2} storage projects, a cap rock is generally needed to prevent CO{sub 2} from leaking out of the storage formation. However, the injected CO{sub 2} may still encounter some discrete flow paths such as a conductive well or fault (here referred to as conduits) through the cap rock allowing escape of CO{sub 2} from the storage formation. As CO{sub 2} migrates upward, it may migrate into the surrounding formations. The amount of mass that is lost to the formation is called attenuation. This report describes a simplified model to calculate the CO{sub 2} mass flux at different locations of the conduit and the amount of attenuation to the surrounding formations. From the comparison among the three model results, we can conclude that the steady-state conduit model (SSCM) provides a more accurate solution than the PMC at a given discretization. When there is not a large difference between the permeability of the surrounding formation and the permeability of the conduits, and there is leak-off at the bottom formation (the formation immediately above the CO{sub 2} plume), a fine discretization is needed for an accurate solution. Based on this comparison, we propose to use the SSCM in the rapid prototype for now given it does not produce spurious oscillations, and is already in FORTRAN and therefore can be easily made into a dll for use in GoldSim.

54 ENVIRONMENTAL SCIENCES↗

Solving iTOUGH2 simulation and optimization problems using the PEST protocol

The PEST protocol has been implemented into the iTOUGH2 code, allowing the user to link any simulation program (with ASCII-based inputs and outputs) to iTOUGH2's sensitivity analysis, inverse modeling, and uncertainty quantification capabilities. These application models can be pre- or post-processors of the TOUGH2 non-isothermal multiphase flow and transport simulator, or programs that are unrelated to the TOUGH suite of codes. PEST-style template and instruction files are used, respectively, to pass input parameters updated by the iTOUGH2 optimization routines to the model, and to retrieve the model-calculated values that correspond to observable variables. We summarize the iTOUGH2 capabilities and demonstrate the flexibility added by the PEST protocol for the solution of a variety of simulation-optimization problems. In particular, the combination of loosely coupled and tightly integrated simulation and optimization routines provides both the flexibility and control needed to solve challenging inversion problems for the analysis of multiphase subsurface flow and transport systems.

54 ENVIRONMENTAL SCIENCES↗