Engineering Papers⌕ Search

Engineering topics

Zhang, Xin

Publications and source records attributed to Zhang, Xin.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Chemical tuning of a honeycomb magnet through a critical point

BaCo 2⁢ (AsO 4 )⁢ 2 (BCAO) has seen extensive study since its initial identification as a proximate Kitaev quantum spin liquid candidate. Thought to be described by the highly anisotropic XXZ-J 1 -J 3 model, the ease with which magnetic order is suppressed in the system indicates proximity to a spin liquid phase. Upon chemical tuning via partial arsenic substitution with vanadium, we show an initial suppression of long-range incommensurate order in the BCAO system to T ≈ 3.0 K, followed by increased spin freezing at higher substitution levels. Between these two regions, at around 10% substitution, the system is shown to pass through a critical point where the competing J 1 /J 3 exchange interactions become more balanced, producing a more complex magnetic ground state, likely stabilized by quantum fluctuations. Here, this state shows how slight compositional change in magnetically frustrated systems may be leveraged to tune ground state degeneracies and potentially realize a quantum spin liquid state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Predicting Outcomes of Nanoparticle Attachment by Connecting Atomistic, Interfacial, Particle, and Aggregate Scales

Predicting nanoparticle aggregation and attachment phenomena requires a rigorous understanding of the interplay among crystal structure, particle morphology, surface chemistry, solution conditions, and interparticle forces, yet no comprehensive picture exists. We used an integrated suite of experimental, theoretical, and simulation methods to resolve the effect of solution pH on the aggregation of boehmite nanoplatelets, a case study with important implications for the environmental management of legacy nuclear waste. Real-time observations showed that the particles attach preferentially along the (010) planes at pH 8.5 and the (101) planes at pH 11. To rationalize these results, we established the connection between key physicochemical phenomena across the relevant length scales. Starting from molecular-scale simulations of surface hydroxyl reactivity, we developed an interfacial-scale model of the corresponding electrostatic potentials, with subsequent particle-scale calculations of the resulting driving forces allowing successful prediction of the attachment modes. Finally, we scaled these phenomena to understand the collective structure at the aggregate-scale . Here, our results indicate that facet-specific differences in surface chemistry produce heterogeneous surface charge distributions that are coupled to particle anisotropy and shape-dependent hydrodynamic forces, to play a key role in controlling aggregation behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Machine learning assisted phase and size-controlled synthesis of iron oxide particles

Synthesis of iron oxides with specific phases and particle sizes is a crucial challenge in various fields, including materials science, energy storage, biomedical applications, environmental science, and earth science. However, despite significant advances in this area, much of the current palette of particle outcomes has been based on time-consuming trial-and-error exploration of synthesis conditions. The present study was designed to explore a very different approach to 1) predict the outcome of synthesis from specified reaction parameters based on using machine learning (ML) techniques, and 2) correlate sets of parameters to obtain products with desired outcomes by a newly designed recommendation algorithm. To achieve this, four ML algorithms were tested, namely random forest, logistic regression, support vector machine, and k-nearest neighbor. Among the models, random forest outperformed the others, attaining 96% and 81% accuracy when predicting the phase and size of iron oxide particles in the test dataset. Surprisingly, the permutation feature importance analysis revealed that volume, which may strongly relate to pressure, was one of the important features, along with precursor concentration, pH, temperature, and time, influencing the phase and size of iron oxide particles during synthesis. To verify the robustness of the random forest models, prediction and experimental results were compared based on 24 randomly generated methods in additive and non-additive systems not included in the datasets. The predictions of product phase and particle size from the models agreed well with the experimental results. Furthermore, a searching and ranking algorithm was developed to recommend potential synthesis parameters for obtaining iron oxide products with the desired phase and particle size from previous studies in the dataset. Furthermore, this study lays the foundation for a closed-loop approach in materials synthesis and preparation, beginning with suggesting potential reaction parameters from the dataset and predicting potential outcomes, followed by conducting experiments and analyses, and ultimately enriching the dataset.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Insights into Chemical Prelithiation of SiO x /Graphite Composite Anodes through Scanning Electron Microscope Imaging

Initial Coulombic efficiency (ICE) is critical for determining the energy density of lithium-ion batteries (LIBs) used for practical applications; however, it is typically disregarded in anode research. We used SiO x and graphite composite anodes for commercial lithium-ion batteries in our preliminary research to achieve a balance between ICE, capacity, and cycling life. ICE reached 88%; however, it needs further improvement for commercial applications. Prelithiation is a process that involves the introduction of extra lithium ions into LIBs during their manufacturing to enhance the overall performance of the LIBs. We applied a chemical prelithiation method on our SiO x /graphite composite anodes, which comprised 95 wt % of the active material mass loading on the electrode. The ICE increased from 88% to 98% using an aryllithium reagent impregnation method within 2 min of prelithiation. The anode’s specific capacity density, rate, and cycle performance also significantly improved. Scanning electron microscopy (SEM) imaging enhanced by an osmium tetroxide staining method indicated that the P-anode contained a stable solid electrolyte interface (SEI) layer after the prelithiation process and cycling electrochemical test. The P-anode’s stable charge differential peak over 500 cycles also showcases a robust artificial SEI layer that was generated by the prelithiation procedure. Here, this prelithiation process has significant potential for adoption in the LIB industry’s current electrode manufacturing process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Global nitrogen deposition inputs to cropland at national scale from 1961 to 2020

Nitrogen (N) deposition is a significant nutrient input to cropland and consequently important for the evaluation of N budgets and N use efficiency (NUE) at different scales and over time. However, the spatiotemporal coverage of N deposition measurements is limited globally, whereas modeled N deposition values carry uncertainties. Here, we reviewed existing methods and related data sources for quantifying N deposition inputs to crop production on a national scale. We utilized different data sources to estimate N deposition input to crop production at national scale and compared our estimates with 14 N budget datasets, as well as measured N deposition data from observation networks in 9 countries. We created four datasets of N deposition inputs on cropland during 1961–2020 for 236 countries. These products showed good agreement for the majority of countries and can be used in the modeling and assessment of NUE at national and global scales. One of the datasets is recommended for general use in regional to global N budget and NUE estimates.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Machine Learning Automated Analysis of Enormous Synchrotron X-ray Diffraction Datasets

X-ray diffraction (XRD) data analysis can be a time-consuming and laborious task. Deep neural network (DNN) based models trained with synthetic XRD patterns have been proven to be a highly efficient, accurate, and automated method for analyzing common XRD data collected from solid samples in ambient environments. However, it remains unclear whether synthetic XRD-based models can be effective in solving micro(μ)-XRD mapping data for in situ experiments involving liquid phases, which always have lower quality and significant artifacts. In this study, we collected μ-XRD mapping data from a LaCl 3 -calcite hydrothermal fluid system and trained two categories of models to analyze the experimental XRD patterns. Here, the models trained solely with synthetic XRD patterns showed low accuracy (as low as 64%) when solving experimental μ-XRD mapping data. However, the accuracy of the DNN models significantly improved (90% or above) when we trained them with a data set containing both synthetic and a small number of labeled experimental μ-XRD patterns. This study highlights the importance of labeled experimental patterns in training DNN models to solve μ-XRD mapping data from in situ experiments involving liquid phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Proton-regulated alcohol oxidation for high-capacity ketone-based flow battery anolyte

Redox flow batteries have a unique architecture that potentially enables cost-effective long-duration energy storage to address the intermittency introduced by increased renewable integration for the decarbonization of the electric power sector. Targeted molecular engineering has demonstrated electrochemical reversibility in natively redox-inactive ketone molecules in aqueous electrolytes. Yet, the kinetics of fluorenone-based flow batteries continue to be limited by slow alcohol oxidation. We show how strategically designed proton regulators can accelerate alcohol oxidation and thus enhance battery kinetics. Fluorenone-based flow batteries with the organic additive ß-cyclodextrin demonstrate enhanced rate capability, high capacity, and long cycling. This study opens a new avenue to improve the kinetics of aqueous organic flow batteries by modulating the reaction pathway with a homogeneous catalyst.

25 ENERGY STORAGE↗
DOE OSTI2023

Progresses and Perspectives of All‐Iron Aqueous Redox Flow Batteries

Abstract Redox flow batteries (RFBs) are a promising option for long‐duration energy storage (LDES) due to their stability, scalability, and potential reversibility. However, solid‐state and non‐aqueous flow batteries have low safety and low conductivity, while aqueous systems using vanadium and zinc are expensive and have low power and energy densities, limiting their industrial application. An approach to lower capital cost and improve scalability is to utilize cheap Earth‐abundant metals such as iron (Fe). Nevertheless, all‐iron RFBs have many complications, involving voltage loss from ohmic resistance, side reactions such as hydrogen evolution, oxidation, and most significantly electrode plating, and dendrite growth. To address these issues, researchers have begun to examine the effects of various alterations to all‐iron RFBs, such as adding organic ligands to form Fe complexes and using a slurry electrode instead of common materials such as graphite or platinum rods. Overall, progress in improving aqueous all‐iron RFBs is at its infant stage, and new strategies must be introduced, such as the utilization of nanoparticles, which can limit dendrite growth while increasing storage capacity. This review provides an in‐depth overview of current research and offers perspectives on how to design the next generation of all‐iron aqueous RFBs.

Belongia, Shawn↗
DOE OSTI2023

Pressure-induced nonmonotonic cross-over of steady relaxation dynamics in a metallic glass

Relaxation dynamics, as a key to understand glass formation and glassy properties, remains an elusive and challenging issue in condensed matter physics. In this work, in situ high-pressure synchrotron high-energy X-ray photon correlation spectroscopy has been developed to probe the atomic-scale relaxation dynamics of a cerium-based metallic glass during compression. Although the sample density continuously increases, the collective atomic motion initially slows down as generally expected and then counterintuitively accelerates with further compression (density increase), showing an unusual nonmonotonic pressure-induced steady relaxation dynamics cross-over at ~3 GPa. Furthermore, by combining in situ high-pressure synchrotron X-ray diffraction, the relaxation dynamics anomaly is evidenced to closely correlate with the dramatic changes in local atomic structures during compression, rather than monotonically scaling with either sample density or overall stress level. In conclusion, these findings could provide insight into relaxation dynamics and their relationship with local atomic structures of glasses.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Understanding the mechanisms of anisotropic dissolution in metal oxides by applying radiolysis simulations to liquid-phase TEM

Iron-based redox-active minerals are ubiquitous in soils, sediments, and aquatic systems. Their dissolution is of great importance for microbial impacts on carbon cycling and the biogeochemistry of the lithosphere and hydrosphere. Despite its widespread significance and extensive prior study, the atomic-to-nanoscale mechanisms of dissolution remain poorly understood, particularly the interplay between acidic and reductive processes. Here, we use in situ liquid-phase-transmission electron microscopy (LP-TEM) and simulations of radiolysis to probe and control acidic versus reductive dissolution of akaganeite (β–FeOOH) nanorods. Informed by crystal structure and surface chemistry, the balance between acidic dissolution at rod tips and reductive dissolution at rod sides was systematically varied using pH buffers, background chloride anions, and electron beam dose. We find that buffers, such as bis-tris, effectively inhibited dissolution by consuming radiolytic acidic and reducing species such as superoxides and aqueous electrons. In contrast, chloride anions simultaneously suppressed dissolution at rod tips by stabilizing structural elements while promoting dissolution at rod sides through surface complexation. Dissolution behaviors were systematically varied by shifting the balance between acidic and reductive attacks. The findings show LP-TEM combined with simulations of radiolysis effects can provide a unique and versatile platform for quantitatively investigating dissolution mechanisms, with implications for understanding metal cycling in natural environments and the development of tailored nanomaterials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ultra-low concentration terbium (Tb) adsorption on garlic peels biosorbent and its application for $\mathrm{Nd}$-$\mathrm{Fe}$-$\mathrm{B}$ scraps recovery

Motivated by the strategic value of middle-heavy rare earth elements (MHREEs), we proposed a bio-adsorption method to recover ultra-low concentration terbium (Tb(Ⅲ)) from industrial wastewater that originated from the Nd-Fe-B scraps recovery process. It could be found that Tb(Ⅲ) ions as low as 5.34 ng·mL -1 (ppb) could be adsorbed onto Ca(Ⅱ)-modified garlic peels (Ca-GP) within 10 min with the adsorption efficiency of 99.2% at pH 3.5. The adsorption behavior of Tb(Ⅲ) onto Ca-GP conformed the Langmuir isotherm model and pseudo-second-order kinetic model. Attenuated total reflection Fourier Transform Infrared Spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS) and density-functional theory (DFT) calculations results showed that Tb(Ⅲ) ions could be ion-exchanged with cations in Ca-GP such as Ca(Ⅱ) and -COOH. In application, column experiment results showed that the maximum bed adsorption capacity for Tb, praseodymium (Pr), neodymium (Nd), dysprosium (Dy), and Total rare earth elements (REEs) ions calculated by the Thomas model was 0.06, 3.50, 9.65, 7.34, and 27.37 µg·g -1 , respectively, with the initial concentration of 0.37 ng·mL -1 Tb, 20 ng·mL -1 Pr, 44 ng·mL -1 Nd, 67 ng·mL -1 Dy and 170 ng·mL -1 total REEs ions of actual solutions (below the solubility of rare-earth hydroxide). Here this manuscript thus provided a novel cost-effective and efficient approach to the enrichment and recovery of MHREEs from ultra-low concentration REEs ions-containing solutions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Molecular Imaging Reveals Two Distinct Mixing States of PM 2.5 Particles Sampled in a Typical Beijing Winter Pollution Case

Mixing states of aerosol particles are crucial for understanding the role of aerosols in influencing air quality and climate. However, a fundamental understanding of the complex mixing states is still lacking because most traditional analysis techniques only reveal bulk chemical and physical properties with limited surface and 3-D information. In this research, 3-D molecular imaging enabled by ToF-SIMS was used to elucidate the mixing states of PM 2.5 samples obtained from a typical Beijing winter haze event. In light pollution cases, a thin organic layer covers separated inorganic particles, while in serious pollution cases, ion exchange and an organic-inorganic mixing surface on large-area particles were observed. Finally, the new results provide key 3-D molecular information of mixing states, which is highly desirable for reducing uncertainty and bias in representing aerosol-cloud interactions in current Earth System Models, and improving the understanding of aerosols on air quality and human health.

3-D molecular imaging↗
DOE OSTI2023

Effects of γ-Irradiation, Cation Size, and Salt Concentration on the Aggregation of Boehmite Nanoplatelets

The effects of radiation on the aggregation of nanoplatelets of aluminum oxyhydroxide (boehmite) in slurries of M 1+ cation nitrates has been observed using tumbler small- and ultra-small-angle neutron scattering. Nitrate solutions of H, Li, Na, K, and Rb at concentrations of 10 -5 , 10 -3 , 10 -1 , 2, and 4 molal were compared to the results for pure H 2 O. Primary aggregates consisting of small stacks of boehmite platelets that form immediately after the boehmite is placed in water are smaller for irradiated boehmite than the pristine material. Here, the primary aggregates for irradiated boehmite also appear to have a rougher surface than those observed for unirradiated materials. Both results are possibly due to breaking of the surface OH species and a neutralization of the surface. At low salt concentrations, the pH of the irradiated boehmite slurries is lower than that of the corresponding pristine material indicating that irradiated boehmite adsorbs fewer protons or more hydroxide onto its surface than the pristine boehmite. Increasing the salt concentration decreases the pH to near neutral at 7 due to screening of the electric double layer at the solid/liquid interface. Irradiation does not seem to affect the size of secondary aggregates formed from the aggregation of primary aggregates or of the overall size of the primary aggregates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Community response of soil microorganisms to combined contamination of polycyclic aromatic hydrocarbons and potentially toxic elements in a typical coking plant

Both polycyclic aromatic hydrocarbons (PAHs) and potentially toxic elements (PTEs) of coking industries impose negative effects on the stability of soil ecosystem. Soil microbes are regarded as an essential moderator of biochemical processes and soil remediation, while their responses to PAHs-PTEs combined contamination are largely unknown. In the present study, soil microbial diversity and community composition in the typical coking plant under the chronic co-exposure of PAHs and PTEs were investigated and microbial interaction networks were built to reveal microbial co-occurrence patterns. The results indicated that the concentrations of PAHs in the soil inside the coking plant were significantly higher than those outside the plant. The mean concentration of ∑16PAHs was 2894.4 ng·g −1 , which is 5.58 times higher than that outside the plant. The average Hg concentration inside the coking plant was 22 times higher than the background value of Hebei province. The soil fungal community inside the coking plant showed lower richness compared with that of outside community, and there are significant difference in the bacterial and fungal community composition between inside and outside of coking plant ( p < 0.01). Predicted contribution of different environmental factors to each dominant species based on random forest identified 20 and 25 biomarkers in bacteria and fungi, respectively, that were highly sensitive to coking plant soil in operation, such as Betaproteobacteria，Sordariomycetes and Dothideomycetes . Bacterial and fungal communities were shaped by the soil chemical properties (pH), PTEs (Hg), and PAHs together in the coking plant soils. Furthermore, the bacterial and fungal interaction patterns were investigated separately or jointly by intradomain and interdomain networks. Competition is the main strategy based on the co-exclusion pattern in fungal community, and the competitive relationship inside the coking plant is more complex than that outside the plant. In contrast, cooperation is the dominant strategy in bacterial networks based on the co-occurrence pattern. The present study provided insights into microbial response strategies and the interactions between bacteria and fungi under long-term combined contamination.

Shen, Qihui↗
DOE OSTI2023

Fluorenone/fluorenol derivatives for aqueous redox flow batteries

Aqueous electrolytes comprising fluorenone/fluorenol derivatives are disclosed. The electrolyte may be an anolyte for an aqueous redox flow battery. In some embodiments, the compound, or salt thereof, has a structure according to any one of formulas I-III where Q 1 -Q 4 independently are CH, C(R 1 ) or N, wherein 0, 1, or 2 of Q 1 -Q 4 are N; Q 5 -Q 8 independently are CH, C(R 2 ), or N, wherein 0, 1, or 2 of Q 5 -Q 8 are N; Y is C=O or C(H)OH; R 1 and R 2 independently are an electron withdrawing group; n is an integer >1; and x and y independently are 0, 1, 2, 3, or 4, where at least one of x and y is not 0.

Wang, Wei↗