Engineering Papers⌕ Search

Engineering topics

Zhang, X

Publications and source records attributed to Zhang, X.

At least 91 records · Page 5

LONG-TERM PERFORMANCE OF SOLID OXIDE STACKS WITH ELECTRODE-SUPPORTED CELLS OPERATING IN THE STEAM ELECTROLYSIS MODE

Performance characterization and durability testing have been completed on two five-cell high-temperature electrolysis stacks constructed with advanced cell and stack technologies. The solid oxide cells incorporate a negative-electrode-supported multi-layer design with nickel-zirconia cermet negative electrodes, thin-film yttria-stabilized zirconia electrolytes, and multi-layer lanthanum ferrite-based positive electrodes. The per-cell active area is 100 cm2. The stack is internally manifolded with compliant mica-glass seals. Treated metallic interconnects with integral flow channels separate the cells. Stack compression is accomplished by means of a custom spring-loaded test fixture. Initial stack performance characterization was determined through a series of DC potential sweeps in both fuel cell and electrolysis modes of operation. Results of these sweeps indicated very good initial performance, with area-specific resistance values less than 0.5 ?.cm2. Long-term durability testing was performed with A test duration of 1000 hours. Overall performance degradation was less than 10% over the 1000-hour period. Final stack performance characterization was again determined by a series of DC potential sweeps at the same flow conditions as the initial sweeps in both electrolysis and fuel cell modes of operation. A final sweep in the fuel cell mode indicated a power density of 0.356 W/cm2, with average per-cell voltage of 0.71 V at a current of 50 A.

08 HYDROGEN↗

High Temperature Steam Electrolysis: Demonstration of Improved Long-Term Performance

Long-term performance is an ongoing issue for hydrogen production based on high-temperature steam electrolysis (HTSE). For commercial deployment, solid-oxide electrolysis stacks must achieve high performance with long-term degradation rates of {approx}0.5%/1000 hours or lower. Significant progress has been achieved toward this goal over the past few years. This paper will provide details of progress achieved under the Idaho National Laboratory high temperature electrolysis research program. Recent long-term stack tests have achieved high initial performance with degradation rates less than 5%/khr. These tests utilize internally manifolded stacks with electrode-supported cells. The cell material sets are optimized for the electrolysis mode of operation. Details of the cells and stacks will be provided along with details of the test apparatus, procedures, and results.

08 HYDROGEN↗

TESTING AND PERFORMANCE ANALYSIS OF NASA 5 CM BY 5 CM BI-SUPPORTED SOLID OXIDE ELECTROLYSIS CELLS OPERATED IN BOTH FUEL CELL AND STEAM ELECTROLYSIS MODES

A series of 5 cm by 5 cm bi-supported Solid Oxide Electrolysis Cells (SOEC) were produced by NASA for the Idaho National Laboratory (INL) and tested under the INL High Temperature Steam Electrolysis program. The results from the experimental demonstration of cell operation for both hydrogen production and operation as fuel cells is presented. An overview of the cell technology, test apparatus and performance analysis is also provided. The INL High Temperature Steam Electrolysis laboratory has developed significant test infrastructure in support of single cell and stack performance analyses. An overview of the single cell test apparatus is presented. The test data presented in this paper is representative of a first batch of NASA's prototypic 5 cm by 5 cm SOEC single cells. Clearly a significant relationship between the operational current density and cell degradation rate is evident. While the performance of these cells was lower than anticipated, in-house testing at NASA Glenn has yielded significantly higher performance and lower degradation rates with subsequent production batches of cells. Current post-test microstructure analyses of the cells tested at INL will be published in a future paper. Modification to cell compositions and cell reduction techniques will be altered in the next series of cells to be delivered to INL with the aim to decrease the cell degradation rate while allowing for higher operational current densities to be sustained. Results from the testing of new batches of single cells will be presented in a future paper.

08 HYDROGEN↗

Room temperature detector array technology for the terahertz to far-infrared.

Thermal detection has made extensive progress in the last 40 years, however, the speed and detectivity can still be improved. The advancement of silicon photonic microring resonators has made them intriguing for detection devices due to their small size and high quality factors. Implementing silicon photonic microring or microdisk resonators as a means of a thermal detector gives rise to higher speed and detectivity, as well as lower noise compared to conventional devices with electrical readouts. This LDRD effort explored the design and measurements of silicon photonic microdisk resonators used for thermal detection. The characteristic values, consisting of the thermal time constant ({tau} {approx} 2 ms) and noise equivalent power were measured and found to surpass the performance of the best microbolometers. Furthermore the detectivity was found to be D{sub {lambda}} = 2.47 x 10{sup 8} cm {center_dot} {radical}Hz/W at 10.6 {mu}m which is comparable to commercial detectors. Subsequent design modifications should increase the detectivity by another order of magnitude. Thermal detection in the terahertz (THz) remains underdeveloped, opening a door for new innovative technologies such as metamaterial enhanced detectors. This project also explored the use of metamaterials in conjunction with a cantilever design for detection in the THz region and demonstrated the use of metamaterials as custom thin film absorbers for thermal detection. While much work remains to integrate these technologies into a unified platform, the early stages of research show promising futures for use in thermal detection.

36 MATERIALS SCIENCE↗

Influences of sub-Alfvenic shear flows on nonlinear evolution of magnetic reconnection in compressible plasmas

Influences of sub-Alfvenic shear flows on the nonlinear evolution of the magnetic reconnection are studied in the framework of compressible resistive MHD and compressible Hall MHD. It is found for the first time that the sub-Alfvenic shear flow can either stabilize or destabilize magnetic reconnection, which is mainly determined by the plasma beta and the half thickness of the shear flow ({lambda}{sub v}). The shear flow exhibits a suppressing effect on magnetic reconnection and the boosting effect nearly disappears for the beta plasma {beta} < or approx. 1, which is associated with the presence of a pair of discontinuities in the upper and lower inflow region. The shear flow has the boosting effect on magnetic reconnection when the half thickness of the shear flow exceeds a critical value in the high beta plasma which is in a good agreement with the results from incompressible simulation. With the inclusion of the Hall effect, shear flow can still either stabilize or destabilize magnetic reconnection, but the boosting effect becomes weaker as the ion inertial length d{sub i} increases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of final state interactions on particle production in d+Au collisions at energies available at the BNL Relativistic Heavy Ion Collider

We show that particle species dependence of enhanced hadron production at intermediate transverse momentum (p{sub T}) for d+Au collisions at RHIC can be understood in terms of the hadronization from string fragmentation and the subsequent hadronic rescatterings in the final state. A multiphase transport model (AMPT) with two different hadronization mechanisms, string fragmentation or parton coalescence, is used in our study. When the hadrons are formed from string fragmentation, the subsequent hadronic rescatterings will result in particle mass dependence of the nuclear modification factor R{sub CP}, which is consistent with the present experimental data. On the other hand, in the framework of parton coalescence, the mass dependence disappears and the strangeness plays an important role in hadron production.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Phase change behavior in titanium-doped Ge{sub 2}Sb{sub 2}Te{sub 5} films

The titanium-doped Ge{sub 2}Sb{sub 2}Te{sub 5} films were deposited on Si(100) substrates by comagnetron sputtering method. The titanium concentrations in those films were determined by x-ray photoelectron spectroscopy. The influence of Ti doping upon phase change characteristics of the samples has been investigated by x-ray diffraction and a temperature-regulable UVISEL typed spectroscopic ellipsometry. With the augmentation of Ti doping concentration, the crystalline temperatures of the films went up while annealing, and the face-centered-cubic phase of them had high thermal stability because of the bond making between Ti and Te elements partly.

36 MATERIALS SCIENCE↗

Calibrated cylindrical Mach probe in a plasma wind tunnel

A simple cylindrical Mach probe is described along with an independent calibration procedure in a magnetized plasma wind tunnel. A particle orbit calculation corroborates our model. The probe operates in the weakly magnetized regime in which probe dimension and ion orbit are of the same scale. Analytical and simulation models are favorably compared with experimental calibration.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Visualizing interfacial charge transfer in Ru-dye sensitized TiO{sub 2} nanoparticles using x-ray transient absorption spectroscopy.

A molecular level understanding of the structural reorganization accompanying interfacial electron transfer is important for rational design of solar cells. Here we have applied XTA (X-ray transient absorption) spectroscopy to study transient structures in a heterogeneous interfacial system mimicking the charge separation process in dye-sensitized solar cell (DSSC) with Ru(dcbpy){sub 2}(NCS){sub 2} (RuN3) dye adsorbed to TiO{sub 2} nanoparticle surfaces. The results show that the average Ru-NCS bond length reduces by 0.06 {angstrom}, whereas the average Ru?N(dcbpy) bond length remains nearly unchanged after the electron injection. The differences in bond-order change and steric hindrance between two types of ligands are attributed to their structural response in the charge separation. This study extends the application of XTA into optically opaque hybrid interfacial systems relevant to the solar energy conversion.

14 SOLAR ENERGY↗

Grain boundary resistivities of polycrystalline Au films

The surface and grain boundary resistivities of polycrystalline Au films are determined without any adjustable parameters by comparing the changes in residual resistivity and average grain size before and after annealing. The measured resistivity data point to a linear dependence of the surface roughness on the average grain size which suggests a self-similar scaling behavior.

36 MATERIALS SCIENCE↗

An integrative modeling framework to evaluate the productivity and sustainability of biofuel crop production systems

The potential expansion of biofuel production raises food, energy, and environmental challenges that require careful assessment of the impact of biofuel production on greenhouse gas (GHG) emissions, soil erosion, nutrient loading, and water quality. In this study, we describe a spatially explicit integrative modeling framework (SEIMF) to understand and quantify the environmental impacts of different biomass cropping systems. This SEIMF consists of three major components: (1) a geographic information system (GIS)-based data analysis system to define spatial modeling units with resolution of 56 m to address spatial variability, (2) the biophysical and biogeochemical model Environmental Policy Integrated Climate (EPIC) applied in a spatially-explicit way to predict biomass yield, GHG emissions, and other environmental impacts of different biofuel crops production systems, and (3) an evolutionary multiobjective optimization algorithm for exploring the trade-offs between biofuel energy production and unintended ecosystem-service responses. Simple examples illustrate the major functions of the SEIMF when applied to a nine-county Regional Intensive Modeling Area (RIMA) in SW Michigan to (1) simulate biofuel crop production, (2) compare impacts of management practices and local ecosystem settings, and (3) optimize the spatial configuration of different biofuel production systems by balancing energy production and other ecosystem-service variables. Potential applications of the SEIMF to support life cycle analysis and provide information on biodiversity evaluation and marginal-land identification are also discussed. The SEIMF developed in this study is expected to provide a useful tool for scientists and decision makers to understand sustainability issues associated with the production of biofuels at local, regional, and national scales.

bioenergy↗

Dynamical Casimir-Polder force in a one-dimensional cavity with quasimodes

In this article, we consider the dynamic Casimir-Polder force between an atom and a conducting wall in a one-dimensional cavity. Using quasimode theory to describe the dissipation of the electromagnetic fields in the cavity, our investigation shows that the force oscillations are damped in a short time, and tend to a final, steady, negative value. We discuss in detail the effects on the force of the quasimode decay rate, the cavity size, and the atom-wall distance.

74 ATOMIC AND MOLECULAR PHYSICS↗

Progress with Tevatron Electron Lens Head-On Beam-Beam Compensation

Tevatron electron lenses have been successfully used to mitigate bunch-to-bunch differences caused by longrange beam-beam interactions. For this purpose, the electron beam with uniform transverse density distribution was used. Another planned application of the electron lens is the suppression of tune spread due to head-on beam-beam collisions. For this purpose, the transverse distribution of the E{sup -} beam must be matched to that of the antiproton beam. In 2009, the Gaussian profile electron gun was installed in one of the Tevatron electron lenses. We report on the first experiments with non-linear beam-beam compensation. Discussed topics include measurement and control of the betatron tune spread, importance of the beam alignment and stability, and effect of electron lens on the antiproton beam lifetime.

43 PARTICLE ACCELERATORS↗

Size dependent strengthening mechanisms in sputtered Fe/W multilayers

We investigate size dependent strengthening mechanisms in sputtered Fe/W multilayers with individual layer thickness, h, varying from 1 to 200 nm. Microstructure analyses reveal that Fe/W has incoherent bcc/bcc interface when h is greater than 5 nm. When h decreases to 1-2.5 nm, the interface becomes semicoherent, and Fe and W show significant lattice distortions comparing to their bulk counterpart due to interface constraint. The layer thickness dependent drastic variations in x-ray diffraction profiles are simulated well by using an analytical model. Film hardness increases with decreasing h, and approaches a maximum value of 12.5 GPa when h is 1 nm. The layer thickness dependent film hardnesses are compared with analytical models. Koehler's image force plays a major role in determining the maximum strength of composites at smaller h.

36 MATERIALS SCIENCE↗

Excited-state molecular structures captured by x-ray transient absorption spectroscopy : a decade and beyond.

Transient molecular structures along chemical reaction pathways are important for predicting molecular reactivity, understanding reaction mechanisms, as well as controlling reaction pathways. During the past decade, X-ray transient absorption spectroscopy (XTA, or LITR-XAS, laser-initiated X-ray absorption spectroscopy), analogous to the commonly used optical transient absorption spectroscopy, has been developed. XTA uses a laser pulse to trigger a fundamental chemical process, and an X-ray pulse(s) to probe transient structures as a function of the time delay between the pump and probe pulses. Using X-ray pulses with high photon flux from synchrotron sources, transient electronic and molecular structures of metal complexes have been studied in disordered media from homogeneous solutions to heterogeneous solution-solid interfaces. Several examples from the studies at the Advanced Photon Source in Argonne National Laboratory are summarized, including excited-state metalloporphyrins, metal-to-ligand charge transfer (MLCT) states of transition metal complexes, and charge transfer states of metal complexes at the interface with semiconductor nanoparticles. Recent developments of the method are briefly described followed by a future prospective of XTA. It is envisioned that concurrent developments in X-ray free-electron lasers and synchrotron X-ray facilities as well as other table-top laser-driven femtosecond X-ray sources will make many breakthroughs and realise dreams of visualizing molecular movies and snapshots, which ultimately enable chemical reaction pathways to be controlled.

43 PARTICLE ACCELERATORS↗

Observation of transient iron(II) formation in dye-sensitized iron oxide nanoparticles by time-resolved x-ray spectroscopy.

The reduction of ferric iron in solid phase minerals leads to the mobilization of ferrous iron in the environment and is thus a crucial component of the global iron cycle. Despite the importance of this process, a mechanistic understanding of the structural and chemical changes that are caused by this electron transfer reaction is not established because the speed of the fundamental chemical steps renders them inaccessible to conventional study. Ultrafast time-resolved X-ray spectroscopy is a technique that can overcome this limitation and measure changes in oxidation state and structure occurring during chemical reactions that can be initiated by a fast laser pulse. We use this approach with {approx}100 ps resolution to monitor the speciation of Fe atoms in iron oxide nanoparticles following photoinduced electron transfer from a surface-bound photoactive dye molecule. These data represent the first direct real-time observation of the dynamics of ferrous ion formation and subsequent reoxidation in iron oxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗