Engineering Papers⌕ Search

Engineering topics

Zhang, W.

Publications and source records attributed to Zhang, W..

At least 73 records · Page 4

Characterization of seminal plasma proteomic alterations associated with the IVF and rescue‐ICSI pregnancy in assisted reproduction

Abstract Background Seminal plasma is a promising diagnostic fluid for male infertility. In assisted reproduction, the seminal plasma‐based characteristics of normozoospermic men achieving successful clinical pregnancy through rescue intracytoplasmic sperm injection after in vitro fertilization failure remain unclear. Objective To identify potential seminal plasma proteins to contribute to a new understanding of unexplained male factor infertility. Materials and Methods An approach with isobaric tags for relative and absolute quantification labeling coupled with liquid chromatography matrix‐assisted laser desorption ionization mass spectrometry was applied to investigate differentially expressed proteins in the seminal plasma of a rescue intracytoplasmic sperm injection pregnancy group versus an in vitro fertilization pregnancy group of normozoospermic men. Result(s) The present work revealed seventy‐three differentially expressed seminal plasma proteins between the in vitro fertilization and rescue intracytoplasmic sperm injection groups. Forty‐five proteins were upregulated, and 28 proteins were downregulated in the rescue intracytoplasmic sperm injection group compared with the in vitro fertilization group. Bioinformatics analyses showed that these altered proteins were involved in various functions, including the kallikrein‐related proteolytic cascade, immune response, and heparin binding. Furthermore, the validity of the proteomic results was verified by Western blot analysis of the proteins (lactoferrin [LTF], fibronectin [FN1], creatine kinase B type [CKB], kallikrein‐2 [KLK2], aminopeptidase N [ANPEP], extracellular matrix protein 1 [ECM1], glycodelin [PAEP], alpha‐1‐antitrypsin [SERPINA1], and semenogelin‐1 [SEMG1]) and immunofluorescence. Moreover, 16% of the seminal plasma proteins identified in the present work have not been reported in previous studies. Discussion This panel of altered seminal plasma proteins associated with unexplained male factor infertility might have clinical relevance and may be useful in the diagnosis and prognosis of idiopathic infertility in in vitro fertilization. Conclusions Our work not only provides a new complementary high‐confidence dataset of seminal plasma proteins but also shines new light onto the molecular characteristics of seminal plasma from normozoospermic men with different assisted reproductive outcomes.

Liu, X.↗

Toward Resolved Simulations of Burning Fronts in Thermonuclear X-ray Bursts

© 2019 Published under licence by IOP Publishing Ltd. We discuss the challenges of modeling X-ray bursts in multi-dimensions, review the different calculations done to date, and discuss our new set of ongoing simulations. We also describe algorithmic improvements that may help in the future to offset some of the expense of these simulations, and describe what may be possible with exascale computing.

79 ASTRONOMY AND ASTROPHYSICS↗

HEX-P: the High-Energy X-Ray Probe

The High-Energy X-ray Probe (HEX-P) is a next-generation high-energy X-ray observatory with broadband (2-200 keV) response that has 40 times the sensitivity of any previous mission in the 10-80 keV band and > 100 times the sensitivity of any previous mission in the 80-200 keV band. With this leap in observational capability, HEX-P will address a broad range of science objectives beyond any planned mission in the hard X-ray bandpass. HEX-P will probe the extreme environments around black holes and neutron stars, map the growth of supermassive black holes, and quantify the effect they have on their environments. HEX-P will resolve the hard X-ray emission from dense regions of our Galaxy to understand the high- energy source populations and investigate dark matter candidate particles through their decay channel signatures. If developed and launched on a timescale similar to Athena, the complementary abilities of the two missions will greatly enhance the Community’s ability to address the important science questions of the hot universe. HEX-P addresses science that is not planned by any flagship-class missions, and is beyond the capability of an Explorer-class mission.

Madsen, Kristin K.↗

A Graphene-Based Terahertz Hot Electron Bolometer with Johnson Noise Readout

In this paper, we present the development of a graphene-based hot electron bolometer with Johnson noise readout. The bolometer is a graphene microbridge connected to a log spiral antenna by Au contact pads. The Fourier transform spectrometer measurement shows the bolometer has high coupling efficiency in the frequency range from 0.3 to 1.6 THz. Using 300/77 K blackbody loads, we measure an optical noise equivalent power of 5.6 × 10{sup −12} W/Hz{sup 0.5} at 3.0 K. To understand the thermal transport inside the graphene microbridge, we measure the bolometers with different microbridge lengths at different bath temperatures. We find that the thermal conductance due to electron diffusion is significant in the bolometers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation of gradient microstructure and mechanical properties of hot-pressed W-20 wt% Cu composites after sliding friction severe deformation

Highlights: • W particles of composites were refined during sliding friction treatment (SFD). • Dislocation, dislocation tangles and boundary clearly exist in deformed W particle. • YS and UTS of SFDed sample are 308.74 MPa and 553.60 MPa owing to the refinement. • Electrical conductivity of SFDed sample decreased from 33 IACS% to 28.5 IACS%. • Fracture mode changing from inter-granular mode to trans-granular. - Abstract: W-based alloys are currently considered promising candidates for high heat flux components in future fusion reactors. In this paper, hot pressed W-20 wt%Cu composites were treated at room temperature using a sliding friction severe deformation (SFD) process, with a moving speed of 0.2 m/s and an applied load of 500 N. Microstructural evolution of composites after the SFD treatment was evaluated and compared with that of the untreated composites. Results showed that there was a gradient structure generated and an obvious refinement in tungsten particles size in the surface layer after the SFD process. The average particle size of tungsten in the SFD treated composites was 2.60 μm, whereas it was 4.5 μm for tungsten in the untreated composites. Fracture surfaces of the composites indicated that the SFD treatment destroyed the W skeleton and changed fracture mode from predominant inter-granular one to trans-granular one due to the decrease in contact area of W-W inter-particles. Yield strength and ultimate tensile strength of composites after the SFD treatment were 308 MPa and 553 MPa, respectively. The treated composites exhibited micro-hardness values with an average reading of about 308 HV. Analysis of the facture microstructures clearly suggested that the tungsten particles in the treated composites are consisted of dislocations and boundaries as well as dislocation tangles. The electrical conductivity of the composites was decreased from 33 IACS% to 28.5 IACS% after the SFD treatment, mainly due to loss or squeezing of copper into the inner surface.

36 MATERIALS SCIENCE↗

Self-Amplifying Feedbacks Accelerate Greening and Warming of the Arctic

Increased greening, higher vegetation productivity, and shrubification have been observed in Arctic tundra in response to recent warming. Such changes have affected the near-surface climate through opposing biogeophysical feedbacks (BF) associated with changes to albedo and evapotranspiration. However, the likely spatiotemporal variations of BF to future climate change and the consequences for Arctic vegetation and ecology have not been robustly quantified. In this paper, we apply a regional Earth system model (RCA-GUESS) interactively coupling atmospheric dynamics to land vegetation response in three potential 21st-century radiative forcing simulations for the Arctic. We find that BF, dominated by albedo-mediated warming in early spring and evapotranspiration-mediated cooling in summer, have the potential to amplify or modulate local warming and enhance summer precipitation over land. Finally, the magnitude of these effects depends on radiative forcing and subsequent ecosystem responses. Thus, it is important to account for BF when assessing future Arctic climate change and its ecosystem impacts.

54 ENVIRONMENTAL SCIENCES↗

Meeting the Challenges of Modeling Astrophysical Thermonuclear Explosions: Castro, Maestro, and the AMReX Astrophysics Suite

We describe the AMReX suite of astrophysics codes and their application to modeling problems in stellar astrophysics. Maestro is tuned to efficiently model subsonic convective flows while Castro models the highly compressible flows associated with stellar explosions. Both are built on the block-structured adaptive mesh refinement library AMReX. Together, these codes enable a thorough investigation of stellar phenomena, including Type Ia supernovae and X-ray bursts. We describe these science applications and the approach we are taking to make these codes performant on current and future many-core and GPU-based architectures.

79 ASTRONOMY AND ASTROPHYSICS↗

Improving performance of the MgZnO ultraviolet photodetectors by changing the interdigital electrode width

Highlights: • The different electrode width of the metal-semiconductor-metal photodetectors are fabricated by the radio frequency magnetron sputtering technique. • The responsivity and the dark current of the photodetectors will vary with the electrode width. • The main reason of the interesting phenomenon is the change of the density of the carriers. - Abstract: We grow the Mg{sub 0.24}Zn{sub 0.76}O thin film onto a quartz substrate by the radio frequency magnetron sputtering technique. Planar geometry metal-semiconductor-metal structured ultraviolet detectors were fabricated by conventional ultraviolet lithography and wet etching on the Mg{sub 0.24}Zn{sub 0.76}O thin films. To improve the performance of the device, three kinds of photodetectors with different electrode width were fabricated, after a series of tests on those device, it is amusing to find an interesting phenomenon, the Mg{sub 0.24}Zn{sub 0.76}O photodetectors with different electrode width have a great influence on the performance of the whole device. The Mg{sub 0.24}Zn{sub 0.76}O photodetectors that own larger electrode width had a higher responsivity and lower dark current than the photodetectors own littler electrode width. These interesting results are very meaningful for the photodetector industry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Warp-X: A new exascale computing platform for beam–plasma simulations

Turning the current experimental plasma accelerator state-of-the-art from a promising technology into mainstream scientific tools depends critically on high-performance, high-fidelity modeling of complex processes that develop over a wide range of space and time scales. As part of the U.S. Department of Energy's Exascale Computing Project, a team from Lawrence Berkeley National Laboratory, in collaboration with teams from SLAC National Accelerator Laboratory and Lawrence Livermore National Laboratory, is developing a new plasma accelerator simulation tool that will harness the power of future exascale supercomputers for high-performance modeling of plasma accelerators. We present the various components of the codes such as the new Particle-In-Cell Scalable Application Resource (PICSAR) and the redesigned adaptive mesh refinement library AMReX, which are combined with redesigned elements of the Warp code, in the new WarpX software. Lastly, the code structure, status, early examples of applications and plans are discussed.

43 PARTICLE ACCELERATORS↗

Unidirectional response in spin-torque driven magnetization dynamics

It was recently demonstrated in bilayers of permalloy and platinum, that by combining spin torques arising from the spin Hall effect with Oersted field-like torques, magnetization dynamics can be induced with a directional preference.(1) This "unidirectional" magnetization dynamic effect is made possible by exploiting the different even and odd symmetry that damping-like and field-like torques respectively have when magnetization is reversed. The experimental method used to demonstrate this effect was the spin-torque ferromagnetic (ST-FMR) resonance technique; a popular tool used in the phenomenological quantification of a myriad of damping-like and field-like torques. In this report, we review the phenomenology which is used to describe and analyze the unidirectional magnetization dynamic effect in ST-FMR measurements. We will focus on how the asymmetry in the dynamics also is present in the phase angle of the magnetization precession. We conclude by demonstrating a utility of this directional effect; we will outline an improved experimental method that can be used to distinguish a phase-shifted field-like torque in a ST-FMR experiment from a combination of field-like and damping-like torques.

Sklenar, J.↗

An improved prediction of residual stresses and distortion in additive manufacturing

In laser assisted additive manufacturing (AM) an accurate estimation of residual stresses and distortion is necessary to achieve dimensional accuracy and prevent premature fatigue failure, delamination and buckling of components. Since many process variables affect AM, experimental measurements of residual stresses and distortion are time consuming and expensive. Numerical thermo-mechanical models can be used for their estimation, but the quality of calculations depends critically on the accurate transient temperature field which affects both the residual stresses and distortion. Here in this study, a well-tested, three-dimensional, transient heat transfer and fluid flow model is used to accurately calculate transient temperature field for the residual stress and distortion modeling. The calculated residual stress distributions are compared with independent experimental results. It is shown that the residual stresses can be significantly minimized by reducing the layer thickness during AM. Inconel 718 components are found to be more susceptible to delamination than Ti-6Al-4V parts because they encounter higher residual stresses compared to their yield strength.

36 MATERIALS SCIENCE↗