Engineering Papers⌕ Search

Engineering topics

Zhang, Song

Publications and source records attributed to Zhang, Song.

At least 55 records · Page 3

Tacky Elastomers to Enable Tear-Resistant and Autonomous Self-Healing Semiconductor Composites

Mechanical failure of π-conjugated polymer thin films is unavoidable under cyclic loading conditions, due to intrinsic defects and poor resistance to crack propagation. Here, the first tear-resistant and room-temperature self-healable semiconducting composite is presented, consisting of conjugated polymers and butyl rubber elastomers. This new composite displays both a record-low elastic modulus (<1 MPa) and ultrahigh deformability with fracture strain above 800%. More importantly, failure behavior is not sensitive to precut notches under deformation. Autonomous self-healing at room temperature, both mechanical and electronic, is demonstrated through the physical contact of two separate films. The composite film also shows device stability in the ambient environment over 5 months due to much-improved barrier property to both oxygen and water. Butyl rubber is broadly applicable to various p-type and n-type semiconducting polymers for fabricating self-healable electronics to provide new resilient electronics that mimic the tear resistance and healable property of human skin.

36 MATERIALS SCIENCE↗

Open-Shell Donor–Acceptor Conjugated Polymers with High Electrical Conductivity

Conductive polymers largely derive their electronic functionality from chemical doping, processes by which redox and charge-transfer reactions form mobile carriers. While decades of research have demonstrated fundamentally new technologies that merge the unique functionality of these materials with the chemical versatility of macromolecules, doping and the resultant material properties are not ideal for many applications. Here, it is demonstrated that open-shell conjugated polymers comprised of alternating cyclopentadithiophene and thiadiazoloquinoxaline units can achieve high electrical conductivities in their native “undoped” form. Spectroscopic, electrochemical, electron paramagnetic resonance, and magnetic susceptibility measurements demonstrate that this donor–acceptor architecture promotes very narrow bandgaps, strong electronic correlations, high-spin ground states, and long-range π-delocalization. A comparative study of structural variants and processing methodologies demonstrates that the conductivity can be tuned up to 8.18 S cm -1 . This exceeds other neutral narrow bandgap conjugated polymers, many doped polymers, radical conductors, and is comparable to commercial grades of poly(styrene-sulfonate)-doped poly(3,4-ethylenedioxythiophene). X-ray and morphological studies trace the high conductivity to rigid backbone conformations emanating from strong π-interactions and long-range ordered structures formed through self-organization that lead to a network of delocalized open-shell sites in electronic communication. The results offer a new platform for the transport of charge in molecular systems.

36 MATERIALS SCIENCE↗

Achieving High Alignment of Conjugated Polymers by Controlled Dip-Coating

Realizing high polymer chain orientation and ordered thin-film microstructures is beneficial for efficient charge transport of conjugated polymers. However, achieving a high alignment degree remains a challenge due to the sensitive nature of polymers to the processing conditions. By simply varying concentrations during a dip-coating method, the component of polymer aggregates that adopt the planar backbones is enlarged and the ensuing assembly process is promoted. Herein, highly oriented polymer thin films of an isoindigo-based conjugated polymer (PII-2T) are prepared to enhance polymer orientation resulting in a drastic booming in carrier mobilities of organic field-effect-transistors (OFETs). The maximum mobility from aligned polymer films increases by up to 8.3 cm 2 V -1 s -1 , which is tenfold beyond the value evaluated from the unaligned direction or traditional spin-coated samples. The enhanced orientation can also reduce the adverse effects of the contact resistance and facilitate charge transport in transistors. This work demonstrates that the highly aligned conjugated polymer films can be approached by the dip-coating method while offers a latent cornerstone toward understanding the critical role of processing-related parameters in determining morphology of solution-coated thin films.

36 MATERIALS SCIENCE↗

Nonfused Nonfullerene Acceptors with an A–D–A'–D–A Framework and a Benzothiadiazole Core for High-Performance Organic Solar Cells

Nonfullerene acceptors (NFAs) have contributed significantly to the progress of organic solar cells (OSCs). However, most NFAs feature a large fused-ring backbone, which usually requires a tedious multiple-step synthesis, and are not applicable to commercial applications. An alternative strategy is to develop nonfused NFAs, which possess synthetic simplicity and facile tunability in optoelectronic properties and solid-state microstructures. In this work, we report two nonfused NFAs, BTCIC and BTCIC-4Cl, based on an A-D-A'-D-A architecture, which possess the same electron-deficient benzothiadiazole central core but different electron-withdrawing terminal groups. The optical properties, energy levels, and molecular crystallinities were finely tuned by changing the terminal groups. Moreover, a decent power conversion efficiency of 9.3 and 10.5% has been achieved by BTCIC and BTCIC-4Cl, respectively, by blending them with an appropriate polymer donor. These results demonstrate the potential of A-D-A'-D-A type nonfused NFAs for high-performance OSCs. Further development of nonfused NFAs will be very fruitful by employing appropriate building blocks and via side-chain optimizations.

36 MATERIALS SCIENCE↗

Pyrazine-Flanked Diketopyrrolopyrrole (DPP): A New Polymer Building Block for High-Performance n-Type Organic Thermoelectrics

n-Doped conjugated polymers usually show low electrical conductivities and low thermoelectric power factors, limiting their applications in n-type organic thermo- electrics. Here, we report the synthesis of a new diketopyrrolopyrrole (DPP) derivative, pyrazine-flanked DPP (PzDPP), with the deepest LUMO level in all the reported DPP derivatives. Based on PzDPP, a donor-acceptor copolymer, P(PzDPP-CT2), is synthesized. The polymer displays a deep LUMO energy level and strong interchain interaction with a short π-π stacking distance of 3.38 Å. When doped with n-dopant N-DMBI, P(PzDPP-CT2) exhibits high n- type electrical conductivities of up to 8.4 S cm -1 and power factors of up to 57.3 μWm -1 K -2 . These values are much higher than previously reported n-doped DPP polymers, and the power factor also ranks the highest in solution-processable n-doped conjugated polymers. Furthermore, these results suggest that PzDPP is a promising high-performance building block for n-type organic thermoelectrics and also highlight that, without sacrificing polymer interchain interactions, efficient n-doping can be realized in conjugated polymers with careful molecular engineering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Challenge and Solution of Characterizing Glass Transition Temperature for Conjugated Polymers by Differential Scanning Calorimetry

Thermomechanical properties of polymers greatly depend on their glass transition temperature ( T g ). Differential scanning calorimetry (DSC) is commonly used to measure T g of polymers. Yet, many conjugated polymers (CPs), especially donor–acceptor CPs (D–A CPs), do not show a clear glass transition when measured by conventional DSC using simple heat and cool scan. In this work, we discuss the origin of the difficulty for measuring T g in such type of polymers. The changes in specific heat capacity (Δ c p ) at T g were accurately probed for a series of CPs by DSC. The results showed a significant decrease in Δ c p from flexible polymer (0.28 Jg -1 K -1 for polystyrene) to rigid CPs (10 -3 Jg -1 K -1 for a naphthalene diimide-based D–A CP). When a conjugation breaker unit (flexible unit) is added to the D–A CPs, we observed restoration of the Δ c p at T g by a factor of 10, confirming that backbone rigidity reduces the Δ c p . Additionally, an increase in the crystalline fraction of the CPs further reduces Δ c p . We conclude that the difficulties of determining T g for CPs using DSC are mainly due to rigid backbone and semicrystalline nature. We also demonstrate that physical aging can be used on DSC to help locate and confirm the glass transition for D-A CPs with weak transition signals.

36 MATERIALS SCIENCE↗

The effect of side-chain branch position on the thermal properties of poly(3-alkylthiophenes)

Thermomechanical properties of conjugated polymers (CPs) are greatly influenced by both their microstructures and backbone dynamics. In the present work, to explore the effect of the side-chain branch position on the backbone's mobility and molecular packing structure, four poly (3-alkylthiophene-2,5-diyl) derivatives (P3ATs) with different side chains, either branched or linear, were synthesized by a quasi-living Kumada catalyst transfer polymerization (KCTP) method. The side-chain branch position greatly influences the glass transition temperature ( T g ) of the backbone of P3ATs as well as the melting temperature ( T m ), as measured by dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC) respectively. Placing the branching point closer to the conjugated backbone leads to increased backbone T g and T m . Also, according to grazing incidence wide-angle X-ray scattering (GIWAXS) results, branching closer to the backbone causes tighter packing in the side-chain direction. The tighter packing along the side-chain direction coresponds with the higher T m , which decreases the free volume of the polymer system and subsequently increases the T g at the same time. This work offers the first in-depth understanding of branch point influences on the thermal properties of poly(3-alkylthiophenes). It would provide guidance to the future development of side-chain engineering on next-generation CPs with desirable thermomechnical properties for stretchable and wearable electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Intrinsically Stretchable High-Performance Polymer Semiconductor with Low Crystallinity

For wearable and implantable electronics applications, developing intrinsically stretchable polymer semiconductor is advantageous, especially in the manufacturing of large-area and high-density devices. A prime challenge is to simultaneously achieve good electrical and mechanical properties for these semiconductor devices. Although crystalline domains are generally needed to achieve high mobility, amorphous domains are necessary to impart stretchability. Recent progresses in the design of high-performance donor–acceptor polymers that exhibit low degrees of energetic disorder, while having a high fraction of amorphous domains, appear promising for polymer semiconductors. Here, a low crystalline, i.e., near-amorphous, indacenodithiophene-co-benzothiadiazole (IDTBT) polymer and a semicrystalline thieno[3,2-b]thiophene-diketopyrrolopyrrole (DPPTT) are compared, for mechanical properties and electrical performance under strain. It is observed that IDTBT is able to achieve both a high modulus and high fracture strain, and to preserve electrical functionality under high strain. Next, fully stretchable transistors are fabricated using the IDTBT polymer and observed mobility ≈0.6 cm 2 V -1 s -1 at 100% strain along stretching direction. In addition, the morphological evolution of the stretched IDTBT films is investigated by polarized UV-vis and grazing-incidence X-ray diffraction to elucidate the molecular origins of high ductility. In summary, the near-amorphous IDTBT polymer signifies a promising direction regarding molecular design principles toward intrinsically stretchable high-performance polymer semiconductor.

36 MATERIALS SCIENCE↗

Alkyl Chain Length Effects of Polymer Donors on the Morphology and Device Performance of Polymer Solar Cells with Different Acceptors

Abstract The development of nonfullerene acceptors has brought polymer solar cells into a new era. Maximizing the performance of nonfullerene solar cells needs appropriate polymer donors that match with the acceptors in both electrical and morphological properties. So far, the design rationales for polymer donors are mainly borrowed from fullerene‐based solar cells, which are not necessarily applicable to nonfullerene solar cells. In this work, the influence of side chain length of polymer donors based on a set of random terpolymers PTAZ‐TPD10‐C n on the device performance of polymer solar cells is investigated with three different acceptor materials, i.e., a fullerene acceptor [70]PCBM, a polymer acceptor N2200, and a fused‐ring molecular acceptor ITIC. Shortening the side chains of polymer donors improves the device performance of [70]PCBM‐based devices, but deteriorates the N2200‐ and ITIC‐based devices. Morphology studies unveil that the miscibility between donor and acceptor in blend films depends on the side chain length of polymer donors. Upon shortening the side chains of the polymer donors, the miscibility between the donor and acceptor increases for the [70]PCBM‐based blends, but decreases for the N2200‐ and ITIC‐based blends. These findings provide new guidelines for the development of polymer donors to match with emerging nonfullerene acceptors.

Pang, Shuting↗

Big data analytics in smart grids: state-of-the-art, challenges, opportunities, and future directions

Big data has a potential to unlock novel groundbreaking opportunities in the power grid sector that enhances a multitude of technical, social, and economic gains. The currently untapped potential of applying the science of big data for better planning and operation of the power grid is a very challenging task and needs significant efforts all-around. As power grid technologies evolve in conjunction with measurement and communication technologies, this results in unprecedented amount of heterogeneous big data sets from diverse sources. In particular, computational complexity, data security, and operational integration of big data into utility decision frameworks are the key challenges to transform the heterogeneous large dataset into actionable outcomes. Moreover, due to the complex nature of power grids along with the need to balance power in real time, seamless integration of big data into utility operations is very critical. In this context, big data analytics combined with grid visualization can lead to better situational awareness and predictive decisions. This paper presents a comprehensive state-of-the-art review of big data analytics and its applications in power grids, and also identifies challenges and opportunities from utility, industry, and research perspectives. The paper analyzes research gaps and presents insights on future research directions to integrate big data analytics into electric utility decision framework. Detailed information for utilities looking to apply big data analytics and details insights on how utilities can enhance revenue streams and bring disruptive innovation in the industry are discussed. More importantly, general guidelines for utilities to make the right investment in the adoption of big data analytics by unveiling interdependencies among critical infrastructures and operations are also provided.

13 HYDRO ENERGY↗

Microstructure and Properties of Mn-Cu-Based Damping Alloys Prepared by Ball Milling and Hot-Press Sintering

A Mn-Cu-based damping alloy with a nominal composition of 70Mn-24Cu-3Zn-3Al (at.%) was prepared by ball milling of pure elemental powders and subsequent hot-press sintering of powder mixture at 750 and 825 °C for 2 h. For comparison, this alloy was also prepared by induction melting technology and then homogenized at 850 °C for 24 h. Further, they were aged at 430 °C for 2 h. The microstructure, damping capacity and microhardness of the hot-press-sintered and induction-melted alloys have been investigated. The results show that the microstructure of the powder mixture upon ball milling mainly comprises convoluted composite particles containing α-Mn and γ-Cu phases, and isolated α-Mn ones around. The high compactness of the alloys is obtained after hot-press sintering (94.8 and 98.6% at 750 and 825 °C, respectively). At a holding temperature of 750 °C, the microstructure of the alloy is primarily composed of γ-MnCu, γ-CuMn and α-Mn grains. With increasing the target temperature to 825 °C, the single γ-MnCu solid solution has been formed in the alloy by diffusion of Mn etc. into γ-Cu lattices. The hot-press-sintered alloys (especially at 825 °C) possess relatively high damping capacity although which is still lower than that of induction-melted one. In contrast, the microhardness of the hot-press-sintered alloys (especially at 750 °C) is obviously higher than that of the induction-melted one.

36 MATERIALS SCIENCE↗

Glass Transition Phenomenon for Conjugated Polymers

Conjugated polymers are emerging as promising building blocks for a broad range of modern applications including skin-like electronics, wearable optoelectronics, and sensory technologies. In the past three decades, the optical and electronic properties of conjugated polymers have been extensively studied, while their thermomechanical properties, especially the glass transition phenomenon which fundamentally represents the polymer chain dynamics, have received much less attention. Currently, there is a lack of design rules that underpin the glass transition temperature of these semirigid conjugated polymers, putting a constraint on the rational polymer design for flexible stretchable devices and stable polymer glass that is needed for the devices' long-term morphology stability. In this review article, the glass transition phenomenon for polymers, glass transition theories, and characterization techniques are first discussed. Furthermore, previous studies on the glass transition phenomenon of conjugated polymers are reviewed and a few empirical design rules are proposed to fine-tune the glass transition temperature for conjugated polymers. The review paper is finished with perspectives on future directions on studying the glass transition phenomena of conjugated polymers. The goal of this perspective is to draw attention to challenges and opportunities of controlling, predicting, and designing polymeric semiconductors, specifically to accommodate their end use.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study on Tensile Deformation Behavior of TC21 Titanium Alloy

To investigate the tensile deformation behavior of TC21 titanium alloy wires, the isothermal tensile deformation tests were conducted by a Geeble-1500D simulator in the temperature range of 720-880 °C and strain rates of 0.01-10 s{sup −1}. The in situ tensile deformation behavior has been studied by SEM SURPA40. The stress–strain curves indicate that the flow stress has shown an inverse relationship with temperature and a direct relationship with strain rate. The flow stress immediately reached the peak value and, then, gradually decreased due to the dynamic softening induced by dynamic recovery and dynamic recrystallization. According to the hot processing maps, the temperatures ranging from 720 to 760 °C (corresponding to the strain rates of 0.01-0.032 s{sup −1}) and 800-840 °C (corresponding to the strain rates of 0.01-0.056 s{sup −1}) are suitable for processing. The in situ tensile results reveal that the cracks initiated at the pre-fabricated defects with the concentrated stress and mainly propagated in the transgranular mode.

36 MATERIALS SCIENCE↗

The Critical Role of Electron-Donating Thiophene Groups on the Mechanical and Thermal Properties of Donor–Acceptor Semiconducting Polymers

Organic semiconducting donor–acceptor polymers are promising candidates for stretchable electronics owing to their mechanical compliance. However, the effect of the electron-donating thiophene group on the thermomechanical properties of conjugated polymers has not been carefully studied. Here, thin-film mechanical properties are investigated for diketopyrrolopyrrole (DPP)-based conjugated polymers with varying numbers of isolated thiophene moieties and sizes of fused thiophene rings in the polymer backbone. Interestingly, it is found that these thiophene units act as an antiplasticizer, where more isolated thiophene rings or bigger fused rings result in an increased glass transition temperature (T g ) of the polymer backbone, and consequently elastic modulus of the respective DPP polymers. Detailed morphological studies suggests that all samples show similar semicrystalline morphology. This antiplasticization effect also exists in para-azaquinodimethane-based conjugated polymers, indicating that this can be a general trend for various conjugated polymer systems. Using the knowledge gained above, a new DPP-based polymer with increased alkyl side chain density through attaching alky chains to the thiophene unit is engineered. The new DPP polymer demonstrates a record low T g , and 50% lower elastic modulus than a reference polymer without side-chain decorated on the thiophene unit. Finally, this work provides a general design rule for making low-T g conjugated polymers for stretchable electronics.

36 MATERIALS SCIENCE↗

Molecular packing control enables excellent performance and mechanical property of blade-cast all-polymer solar cells

All-polymer solar cells (all-PSCs) are the most promising power generators for flexible and portable devices due to excellent morphology stability and outstanding mechanical property. Prior work suggests high crystallinity is beneficial to device performance but detrimental to mechanical property, therefore identifying the optimized ratio between crystalline and amorphous domains becomes important. In this work, we demonstrated highly efficient and mechanically robust all-PSCs by blade-coating technology in ambient environment based on PTzBI:N2200 system. By controlling the aggregation in solution state and ultrafast film formation process, a weakly ordered molecular packing morphology as well as small phase separation is obtained, which leads to not only the good photovoltaic performance (8.36%-one of the best blade-cast device in air) but also prominent mechanical characteristic. The controlled film reflects a remarkable elongation with the crack onset strain of 15.6%, which is the highest result in organic solar cells without adding elastomers. These observations indicate the great promise of the developed all-PSCs for practical applications toward large-area processing technology.

42 ENGINEERING↗

Wafer-Scale Fabrication of High-Performance n-Type Polymer Monolayer Transistors Using a Multi-Level Self-Assembly Strategy

Wafer–scale fabrication of high–performance uniform organic electronic materials is of great challenge and has rarely been realized before. Previous large–scale fabrication methods always lead to different layer thickness and thereby poor film and device uniformity. Herein, the first demonstration of 4 in. wafer–scale, uniform, and high–performance n–type polymer monolayer films is reported, enabled by controlling the multi–level self–assembly process of conjugated polymers in solution. Since the self–assembly process happened in solution, the uniform 2D polymer monolayers can be facilely deposited on various substrates, and theoretically without size limitations. Polymer monolayer transistors exhibit high electron mobilities of up to 1.88 cm 2 V –1 s –1 , which is among the highest in n–type monolayer organic transistors. This method allows to easily fabricate n–type conjugated polymers with wafer–scale, high uniformity, low contact resistance, and excellent transistor performance (better than the traditional spin–coating method). Furthermore this work provides an effective strategy to prepare large–scale and uniform 2D polymer monolayers, which could enable the application of conjugated polymers for wafer–scale sophisticated electronics.

2D organic materials↗

Tuning the Cross-Linker Crystallinity of a Stretchable Polymer Semiconductor

The cross-linking of conjugated polymers has been shown to be an effective strategy to improve its elastic properties to give deformable semiconductors for plastic electronics. Although there have been extensive studies of the structural requirements of the polymer host for good film ductility, no work to date has focused on the relevance of the structural design or chemistry of these cross-linker additives. In this study, urethane groups and tertiary carbon atoms are inserted into the alkyl backbone of perfluorophenyl azide-based cross-linkers to investigate the importance of cross-linker crystallinity with respect to polymer morphology and hence mechanical and electrical properties. Linear cross-linkers with hydrogen bonding from urethane groups readily phase separate and recrystallize in the polymer network to form cross-linked domains that obstruct the strain distribution of the polymer film. Branch cross-linkers with tertiary carbon on the other hand form an evenly cross-linked network in the polymer blend stemming from excellent miscibility and show a 4-fold increase in fracture strain. Furthermore, a stable hole mobility of 0.2 cm 2 V –1 s –1 is achieved up to ε = 100%, and a stable hole mobility of 0.1 cm 2 V –1 s –1 after 2000 cycles of ε = 25% on fully stretchable organic field-effect transistors.

36 MATERIALS SCIENCE↗

Graph Sampling for Visual Analytics

Effectively visualizing large graphs and capturing the statistical properties are two challenging tasks. To aid in these two tasks, many sampling approaches for graph simplification have been proposed, falling into three categories: node sampling, edge sampling, and traversal-based sampling. It is still unknown which approach is the best. We evaluate commonly used graph sampling methods through a combined visual and statistical comparison of graphs sampled at various rates. We conduct our evaluation on three graph models: random graphs, small-world graphs, and scale-free graphs. Initial results indicate that the effectiveness of a sampling method is dependent on the graph model, the size of the graph, and the desired statistical property. This benchmark study can be used as a guideline in choosing the appropriate method for a particular graph sampling task, and the results presented can be incorporated into graph visualization and analysis tools.

97 MATHEMATICS AND COMPUTING↗