Engineering Papers⌕ Search

Engineering topics

Zhang, S.

Publications and source records attributed to Zhang, S..

At least 163 records · Page 9

Low temperature laser scanning microscopy of a superconducting radio-frequency cavity

An apparatus was created to obtain, for the first time, 2D maps of the surface resistance of the inner surface of an operating superconducting radio-frequency niobium cavity by a low-temperature laser scanning microscopy technique. This allows identifying non-uniformities of the surface resistance with a spatial resolution of about one order of magnitude better than with earlier methods. A signal-to-noise ratio of about 10 dB was obtained with 240 mW laser power and 1 Hz modulation frequency. The various components of the apparatus, the experimental procedure and results are discussed in details in this contribution.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Magic-wavelength optical traps for Rydberg atoms

We propose blue-detuned optical traps that are suitable for trapping of both ground-state and Rydberg excited atoms. The addition of a background compensation field or a suitable choice of the trap geometry provides a magic trapping condition for ground-state and Rydberg atoms at the trap center. Deviations from the magic condition at finite temperature are calculated. Designs that achieve less than 200-kHz differential trap shift between Cs ground states and 125s Rydberg states for 10 {mu}K Cs atoms are presented. Consideration of the trapping potential and photoionization rates suggests that these traps will be useful for quantum-information experiments with atomic qubits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A proposed VUV oscillator-based FEL upgrade at Jefferson Lab

Advances in superconducting linac technology offer the possibility of an upgrade of the Jefferson Lab Free Electron Laser (JLab FEL) facility to an oscillator-based VUV-FEL that would produce 6 x 10{sup 12} coherent 100 eV photons per pulse at multi-MHz repetition rates in the fundamental. At present JLab operates a pair of oscillator-based continuous-wave Free Electron Lasers (FELs) as a linac-based next generation light source in the IR and UV, with sub-picosecond pulses up to 75 MHz. Harmonics upwards of 10 eV are produced and the fully coherent nature of the source results in peak and average brightness values that are several orders of magnitude higher than storage rings. The accelerator uses an energy recovered linac design for efficiency of operation. New style superconducting linac cryomodules with higher gradient, combined with a new injector and beam transport system allow the development of the FEL to higher photon energies.

43 PARTICLE ACCELERATORS↗

Breaking and Moving Hotspots in a Large Grain Nb Cavity with a Laser Beam

Magnetic vortices pinned near the inner surface of SRF Nb cavities are a possible source of RF hotspots, frequently observed by temperature mapping of the cavities outer surface at RF surface magnetic fields of about 100 mT. Theoretically, we expect that the thermal gradient provided by a 10 W green laser shining on the inner cavity surface at the RF hotspot locations can move pinned vortices to different pinning locations. The experimental apparatus to send the beam onto the inner surface of a photoinjector-type large-grain Nb cavity is described. Preliminary results on the changes in thermal maps observed after applying the laser heating are also reported.

43 PARTICLE ACCELERATORS↗

New Titanium Monosulfide Mineral Phase in Yamato 691 Enstatite Chondrite

Yamato 691, an EH3 enstatite chondrite, was among the first meteorites discovered by chance in Antarctica by the Japanese Antarctic Research Expedition (JARE) team in 1969. This discovery led to follow-up searches for meteorites in Antarctica [1]. These international searches have been very successful recovering over 40,000 total specimens (and still counting), including martian and lunar meteorites. Titanium is partly chalcophile in enstatite-rich meteorites. Previous occurrences of Ti-bearing sulfides include troilite, daubrelite and ferroan alabandite in enstatite chondrites and aubrites [2], and heideite with 28.5 wt% Ti in the Bustee aubrite [3]. Here we report a new mineral from Yamato 691, ideally stoichiometric TiS, titanium monosulfide, a simple two-element mineral phase, yet with a very unique crystal structure that, to our knowledge, has not been observed previously in nature.

Nakamura-Messenger, K↗

The Formation of Wassonite: A New Titanium Monosulfide Mineral in the Yamato 691 Enstatite Chondrite

Wassonite, ideally stoichiometric TiS, is a titanium monosulfide not previously observed in nature, that was discovered within the Yamato 691 EH3 enstatite chondrite [1]. Because of the submicrometer size of the wassonite grains, it was not possible to determine conventional macroscopic properties. However, the chemical composition and crystal structure were well constrained by extensive quantitative energy dispersive x-ray analysis and electron diffraction using transmission electron microscopy (TEM). The crystal system for wassonite is rhombohedral (a = 3.42 plus or minus 0.07, c = 26.50 plus or minus 0.53 Angstroms) with space group: R(sup 3 raised bar) m (R9 type), cell volume: 268.4 plus or minus 0.53 Angstroms(sup 3), Z=9, density (calculated): 4.452 grams per cubic centimeter, empirical formula: (Ti(sub 0.93), Fe(sub 0.06), Cr(sub 0.01))S. In this study, we discuss possible formation mechanisms of wassonite and its associated minerals based on the petrology, mineralogy, crystallography, thermodynamic calculations, Al/Mg isotopic systematics and the O-isotopic composition of the wassonite-bearing BO chondrule.

Nakamura-Messenger, K.↗

A Novel Approach for the Simultaneous Determination of Iodide, Iodate and Organo-Iodide for 127 I and 129 I in Environmental Samples Using Gas Chromatography-Mass Spectrometry

In aquatic environments, iodine mainly exists as iodide, iodate, and organic iodine. The high mobility of iodine in aquatic systems has led to 129 I contamination problems at sites where nuclear fuel has been reprocessed, such as the F-area of Savannah River Site. In order to assess the distribution of 129 I and stable 127 I in environmental systems, a sensitive and rapid method was developed which enables determination of isotopic ratios of speciated iodine. Iodide concentrations were quantified using gas chromatography-mass spectrometry (GC-MS) after derivatization to 4-iodo-N,N-dimethylaniline. Iodate concentrations were quantified by measuring the difference of iodide concentrations in the solution before and after reduction by Na 2 S 2 O 5 . Total iodine, including inorganic and organic iodine, was determined after conversion to iodate by combustion at 900 °C. Organo-iodine was calculated as the difference between the total iodine and total inorganic iodine (iodide and iodate). The detection limits of iodide-127 and iodate-127 were 0.34 nM and 1.11 nM, respectively, whereas the detection limits for both iodide-129 and iodate-129 was 0.08 nM (i.e., 2pCi 129 I/L). This method was successfully applied to water samples from the contaminated Savannah River Site, South Carolina, and more pristine Galveston Bay, Texas.

Zhang, S.↗

JLab FEL DC Gun

The Jefferson Lab (JLab) Energy Recovery Linac 10 kW IR Upgrade Free Electron Laser (FEL) is driven by a 350kV DC un-polarized photoemission electron gun. In 2003, an upgrade version of the earlier 1 kW IR Demo FEL gun delivered over 1000 Coulombs with a single Cs:GaAs wafer in one year of operation. Between 2004 and 2007 a second wafer delivered over 7000 Coulombs and up to 9 mA CW beam for FEL operations. Both wafers suffered surface damage with total loss of quantum efficiency in several occasions during high current operations. Since then, the electron gun has been refurbished two times due to field emission damage. Although presently operating at nominal 350kV, field emission has significantly decreased the photocathode lifetime.

Hernandez-Garcia, Carlos↗

Directional Field-Induced Metallization of Quasi-One-Dimensional Li0.9Mo6O17

We report a detailed magnetotransport study of the highly anisotropic quasi-one-dimensional oxide Li{sub 0.9}Mo{sub 6}O{sub 17} whose in-chain electrical resistivity diverges below a temperature T{sub min} {approx} 25 K. For T<T{sub min}, a magnetic field applied parallel to the conducting chain induces a large negative magnetoresistance and, ultimately, the recovery of a metallic state. We show evidence that this insulator-metal crossover is a consequence of field-induced suppression of a density-wave gap in a highly one-dimensional conductor. At the highest fields studied, there is evidence for the possible emergence of a novel superconducting state with an onset temperature T{sub c} > 10 K.

36 MATERIALS SCIENCE↗

Transport Phenomena of Off-Axis Sputtering Deposition

Various high quality epitaxial films, especially oxides, have been synthesized using off-axis sputtering deposition. In this presentation, we report the experiment results of ZnO films grown by the off-axis sputtering deposition. Films were synthesized in temperatures ranged from room temperature to 600 C, and pressures from 5 mTorr to 150 mTorr. Film growth rate was measured by surface profilometer, ellipsometer, and wavelength dispersive spectrometry. Due to the collisions between the sputtered species and the residue gases, the kinetic energy of species was reduced and the transport of depositing species changed from a ballistic movement for low pressure to a diffuse drift for high pressure in which the transport species were almost thermalized. The measurements show an increase of growth rates along the gravity vector when the Knodson (Knudsen??) number of transport species is less than 0.05, which suggests that gravity affected the transport characterization in off-axis sputtering deposition. Because the product of pressure (p) and travel distance (d) of sputtered species, p exceeds several mTorr-cm during film deposition, the classical simulations for sputtering process in high vacuum system may not be applied. Based on these experimental measurements, a transport process of the off-axis sputtering deposition is proposed. Several methods including the Monte Carlo method and gravity-driven flow dynamics simulation will be discussed.

Zhu, S.↗

Unic Unstructured CFD Methodology Development

Base heating characteristics is crucial to the success and the overall performance of the X-33 engine. Base heating is important throughout the entire flight trajectory due to the aerospike engine design of X-33. The base region is surrounded by the hot-gas plume, which expands, circulates and impinges on the base. An advanced computation fluid dynamics method is employed in an effort to develop a robust, accurate and efficient tool for the X-33 base heating performance predictions. This computational tool is developed based on a Navier-Stokes flow solver, which is suitable for general complex geometry and includes turbulence, finite-rate chemistry, and radiation models. To fulfill the fast turnaround requirement as a design analysis tool, adaptive mesh refinement method and parallel-computing algorithm are also incorporated in the present model. Case study for the X-33 base-region fluid dynamics and heat transfer characteristics are presented.

Chen, Y. S.↗

TRMM Data Assimilation at NASA

We give an overview of the research at NASA in assimilating tropical rainfall and total precipitable water (TPW) retrievals derived from the TRMM Microwave Imager (TMI) and the Special Sensor Microwave/ Imager (SSM/I) instruments. Global analyses currently contain order-one errors in the primary fields of the hydrological cycle such as precipitation, evaporation, moisture, and the related cloud fields, especially in the tropics. We show that an effective strategy to assimilate tropical rainfall data is to use observations to compensate for errors in moisture tendencies produced by the assimilation model. Results show that assimilating TMI and SSM/I surface rainrates and TPW estimates improves shortrange forecasts and reduces state-dependent systematic errors in the hydrological cycle and related climate parameters such as cloud, radiation, and the large-scale circulation in the tropics. The study provides a demonstration of the potential of using rainfall and moisture observations derived from passive microwave instruments to improve the quality of 4-dimensional global datasets for climate analysis and weather forecasting applications.

Hou, Arthur Y.↗

Mineral induced phosphorylation of glycolate ion--a metaphor in chemical evolution

Bilateral surface-active minerals with excess positive charge concentrate glycolate and trimetaphosphate ion from l0(-3) m aqueous solution to half-saturation of the internal surface sites, and induce phosphorylation of glycolate ion in the mineral with trimetaphosphate, sorbed from l0(-2) m solution. By utilizing reactants from dilute solution at near-neutral pH, and eliminating the need for participating organic nitrogen compounds, the reaction comprises several elements considered necessary for geochemical realism in models for molecular evolution.

NASA Discipline Exobiology↗

Spontaneous assembly of a self-complementary oligopeptide to form a stable macroscopic membrane

A 16-residue peptide [(Ala-Glu-Ala-Glu-Ala-Lys-Ala-Lys)2] has a characteristic beta-sheet circular dichroism spectrum in water. Upon the addition of salt, the peptide spontaneously assembles to form a macroscopic membrane. The membrane does not dissolve in heat or in acidic or alkaline solutions, nor does it dissolve upon addition of guanidine hydrochloride, SDS/urea, or a variety of proteolytic enzymes. Scanning EM reveals a network of interwoven filaments approximately 10-20 nm in diameter. An important component of the stability is probably due to formation of complementary ionic bonds between glutamic and lysine side chains. This phenomenon may be a model for studying the insoluble peptides found in certain neurological disorders. It may also have implications for biomaterials and origin-of-life research.

Non-NASA Center↗