Frustrated Magnetism in Mott Insulating ( V 1 − x Cr x ) 2 O 3
Not Available
Engineering topics
Publications and source records attributed to Zhang, S..
Not Available
Na 2 OsO 4 is an unusual quantum material that, in contrast to the common 5d 2 oxides with spins = 1, owns a magnetically silent ground state with spin = 0 and a band gap at Fermi level attributed to a distortion in the OsO 6 octahedral sites. In this semiconductor, our low-temperature electrical transport measurements indicate an anomaly at 6.3 K with a power-law behavior inclining through the semiconductor-to-metal transition observed at 23 GPa. Even more peculiarly, we discover that before this transition, the material becomes more insulating instead of merely turning into a metal according to the conventional wisdom. Furthermore, to investigate the underlying mechanisms, we applied experimental and theoretical methods to examine the electronic and crystal structures comprehensively, and conclude that the enhanced insulating state at high pressure originates from the enlarged distortion of the OsO 6 . It is such a distortion that widens the band gap and decreases the electron occupancy in Os’s t 2 g orbital through an interplay of the lattice, charge, and orbital in the material, which is responsible for the changes observed in our experiments.
An array of correlative and spatially-resolved techniques, including electroluminescence, photoluminescence, Raman, I-V curve, and high-resolution TEM, have been performed on both GaAs and CdTe solar cells, to study the impact of individual dislocation defects and defect clusters on device performance, the dependence of the impact on the device operation conditions, and the microscopic structures of the defects. This approach offers quantitative and definitive correlation between the atomistic structure of a defect and its effects in a real device.
We have specialized astronomical applications for X-ray microcalorimeters with superconducting transition edge sensors (TESs) that require exceptionally good TES performance, but which operate in the small-signal regime. We have therefore begun a program to carefully characterize the entire transition surface of TESs with and without the usual zebra stripes to see if there are reproducible local “sweet spots” where the performance is much better than average. These measurements require precise knowledge of the circuit parameters. Here, we show how the Shapiro effect can be used to precisely calibrate the value of the shunt resistor. We are also investigating the effects of stress and external magnetic fields to better understand reproducibility problems.
The physics governing electron acceleration by a relativistically intense laser is not confined to the critical density surface; it also pervades the subcritical plasma in front of the target. Here particles can gain many times the ponderomotive energy from the overlying laser and strong fields can grow. Experiments using a high-contrast laser and a prescribed laser prepulse demonstrate that development of the preplasma has an unexpectedly strong effect on the most energetic, superponderomotive electrons. The presented two-dimensional particle-in-cell simulations reveal how strong, voluminous magnetic structures that evolve in the preplasma impact high-energy electrons more significantly than low-energy ones for longer pulse durations and how the common practice of tilting the target to a modest incidence angle can be enough to initiate strong deflection. In conclusion, the implications are that multiple angular spectral measurements are necessary to prevent misleading conclusions from past and future experiments.
Ferroelectric BiFeO 3 is promising for photovoltaic applications, especially in regard to the exploitation of ferroelectric photovoltaic effects for charge separation. However, its large band gap limits efficient sunlight absorption. Here, we demonstrate a new strategy to effectively tune the band gap of tetragonal BiFeO 3 via superlattice structuring with the ferroelectric BiCrO 3 . The (BiCrO 3 ) m /(BiFeO 3 ) n superlattices are found to exhibit conventional ferroelectric properties, but low fundamental band gaps, smaller than either of the parent materials. First-principles calculations reveal that the unexpected band-gap reduction is induced by charge reconstruction due to lattice strain, octahedral distortion, and polarization discontinuity at the BiCrO3-BiFeO 3 interfaces. Ultimately, these results provide a new strategy, in the form of superlattice structuring, which could open the door to the creation of efficient ferroelectric photovoltaics.
Channeling experiments were performed at the OMEGA EP facility using relativistic intensity (> 10 18 W/cm 2 ) kilojoule laser pulses through large density scale length (~ 390-570 μm) laser-produced plasmas, demonstrating the effects of the pulse’s focal location and intensity as well as the plasma’s temperature on the resulting channel formation. The results show deeper channeling when focused into hot plasmas and at lower densities as expected. However, contrary to previous large scale particle-in-cell studies, the results also indicate deeper penetration by short (10 ps), intense pulses compared to their longer duration equivalents. To conclude, this new observation has many implications for future laser-plasma research in the relativistic regime.
Not Available
In 2012 Jefferson Laboratory's energy recovery linac (ERL) driven Free Electron Laser successfully completed a transmission test in which high current CW beam (4.3 mA at 100 MeV) was transported through a 2 mm aperture for 7 hours with beam losses as low as 3 ppm. The purpose of the run was to mimic an internal gas target for DarkLight — an experiment designed to search for a dark matter particle. The ERL was not run again until late 2015 for a brief re-commissioning in preparation for the next phase of DarkLight. In the intervening years, the FEL was rebranded as the Low Energy Recirculator Facility. In 2016 several weeks of operation were allocated to configure the machine for DarkLight with the purpose of exercising – for the first time – an internal gas target in an ERL. Despite a number of challenges, including the inability to energy recover without losses (precluding CW operation), beam was delivered to a target of thickness 10 18 cm -2 which represents a three order of magnitude increase in thickness from previous internal target experiments. Details of the machine configuration and operational experience will be discussed.
We report at the interface between two distinct materials, desirable properties, such as superconductivity, can be greatly enhanced1, or entirely new functionalities may emerge. Similar to in artificially engineered heterostructures, clean functional interfaces alternatively exist in electronically textured bulk materials. Electronic textures emerge spontaneously due to competing atomic-scale interactions, the control of which would enable a top-down approach for designing tunable intrinsic heterostructures. This is particularly attractive for correlated electron materials, where spontaneous heterostructures strongly affect the interplay between charge and spin degrees of freedom. Here we report high-resolution neutron spectroscopy on the prototypical strongly correlated metal CeRhIn 5 , revealing competition between magnetic frustration and easy-axis anisotropy—a well-established mechanism for generating spontaneous superstructures. Because the observed easy-axis anisotropy is field-induced and anomalously large, it can be controlled efficiently with small magnetic fields. Finally, the resulting field-controlled magnetic superstructure is closely tied to the formation of superconducting and electronic nematic textures in CeRhIn 5 , suggesting that in situ tunable heterostructures can be realized in correlated electron materials.
Long ago, Fred Hoyle proposed the existence of an excited level in 12C, which decays into 3α. This level, now nicknamed Hoyle state, was found in experiments and plays a crucial role in our understanding of stellar evolution. Modern experiments concentrate in understanding the geometry of the decay, i.e. a sequential decay 12 C → 8 Be* + α → 3α or a direct decay 12C→3α. Experiments favor the first channel but there might be a possibility of a lower excitation state, which decays directly into 3α. Our paper discusses the probabilities of decay into different channels.
Bismuth ferrite BiFeO 3 (BFO) is an important ferroelectric material for thin-film optoelectronic sensing and potential photovoltaic applications. Its relatively large band gap, however, limits the conversion efficiency of BFO absorber-based PV devices. In this study, based on density functional theory calculations we demonstrate that with well-designed Fe-site elemental substitution, tetragonal BFO can exhibit a much lower fundamental band gap than conventional rhombohedral BFO without forming in-gap electronic states and unravel the underlying mechanisms. Cation atomic size, electronegativity, and crystallographic symmetry are evidenced as critical parameters to tailor the metal 3d – oxygen 2p orbital interactions and thus intrinsically modify electronic structure, particularly, the shape and character of the valence and conduction band edges. With reduced band gap, improved mobility, and uncompromised ferroelectric and magnetic ground states, the present results provide a new strategy of designing high symmetry BFO for efficient optoelectronic applications.
Explore the source record for details and available documents.
Photoluminescence (PL) imaging has been shown to be an efficient technique for investigating carrier diffusion in semiconductors. In the past, the measurement was typically carried out by measuring at one wavelength (e.g., at the band gap) or simply the whole emission band. At room temperature in a semiconductor like GaAs, the band-to-band PL emission may occur in a spectral range over 200 meV, vastly exceeding the average thermal energy of about 26 meV. To investigate the potential dependence of the carrier diffusion on the carrier kinetic energy, we performed wavelength selective PL imaging on a GaAs double hetero-structure in a spectral range from about 70 meV above to 50 meV below the bandgap, extracting the carrier diffusion lengths at different PL wavelengths by fitting the imaging data to a theoretical model. The results clearly show that the locally generated carriers of different kinetic energies mostly diffuse together, maintaining the same thermal distribution throughout the diffusion process. Potential effects related to carrier density, self-absorption, lateral wave-guiding, and local heating are also discussed.
Prediction of hydrocarbon extraction from shale requires specialized knowledge of shale play characteristics and analysis to assess effective, economical, and sustainable implementation of oil and natural gas production. In this paper, we present a statistical approach that can be used as a preliminary investigation into the hydrocarbon resource potential of a shale play based on limited data. Statistical algorithms for Principal Component Analysis (PCA) and Partial Least Squares Regression (PLS) were used to determine if depositional environments and lithographic boundary characteristics of different plays allowed prediction of specific production parameters. This project characterizes Eagle Ford and Utica formations—two high-producing shale plays in the United States—and Banff/Exshaw and Colorado formations—two recently assessed shale plays in Alberta, Canada. Partial Least Squares Regression models were unable to model gas production parameters from predictor variables, highlighting the complexity of gas formations and the need for data on microscale petrophysical characteristics. In contrast, oil production parameters were better predicted, because bulk variables such as mineral composition appeared to correlate with oil location in mineral interfaces. As expected, a PLS model's predictive capabilities increased with specificity of data sets to particular regions of a shale play. Finally, this study indicates how PCA and PLS modeling could assist stakeholders to make preliminary decisions regarding hydrocarbon extraction, especially when limited to publicly available petrophysical data.
We develop a new method using binary collision approximation simulating the Rutherford backscattering spectrometry in channeling conditions (RBS/C) from molecular dynamics atom coordinates of irradiated cells. The approach allows comparing experimental and simulated RBS/C signals as a function of depth without fitting parameters. The simulated RBS/C spectra of irradiated Ni and concentrated solid solution alloys (CSAs, NiFe and NiCoCr) show a good agreement with the experimental results. The good agreement indicates the damage evolution under damage overlap conditions in Ni and CSAs at room temperature is dominated by defect recombination and migration induced by irradiation rather than activated thermally.