Engineering Papers⌕ Search

Engineering topics

Zhang, Qiming

Publications and source records attributed to Zhang, Qiming.

First-principles studies of p-type nitrogen-doped α-Fe{sub 2}O{sub 3-x}S{sub x} alloys

Based on spin-polarized density functional theory, the characteristics of p-type doping are investigated in the N-doped α-Fe{sub 2}O{sub 3−x}S{sub x} alloys by means of first-principles methods. Numerical results show that when N substitutes O atom in pure α-Fe{sub 2}O{sub 3}, N impurity level is a deeper acceptor state. However, the unoccupied level is much shallower when N doped in the α-Fe{sub 2}O{sub 3−x}S{sub x} alloys, which indicates N impurity can provide good and effective p-type carriers. These predicted numerical results are interesting and useful to understand the α-Fe{sub 2}O{sub 3−x}S{sub x} alloys as a new low-cost solar cell material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Giant Electrocaloric Effect in Ferroelectrics with Tailored Polaw-Nanostructures

Electrocaloric effect (ECE) is the temperature and/or entropy change in a dielectric material caused by an electric field induced polarization change. Although ECE has been studied since 1930s, the very small ECE observed in earlier studies in bulk materials before 2007 makes it not attractive for practical cooling applications. The objectives of this DOE program are to carry out a systematical scientific research on the entropy change and ECE in polar-dielectrics, especially ferroelectrics based on several fundamental hypotheses and to search for answers on a few scientific questions. Especially, this research program developed a series of polar-dielectric materials with controlled nano- and meso-structures and carried out studies on how these structures affect the polar-ordering, correlations, energy landscapes, and consequently the entropy states at different phases and ECE. The key hypotheses of the program include: (i) Whether a large ECE can be obtained near the ferroelectric-paraelectric (FE-PE) transition in properly designed ferroelectrics which possess large polarization P and large ß (the coefficient in the thermodynamic Landau theory where the Gibbs free energy G = G = G 0 + ½ a P 2 +1/4 b P 4 + 1/6 c P 6 – EP, and a = ß (T-T c ), where b,c,ß and Tc are constants)? (ii) What determines/determine ß? Whether a ferroelectric material with built-in disorders, which disrupt the polar-correlations and enabling a large number of local polar-states, such as a properly designed ferroelectric relaxor, can achieve a large ECE? (iii) How to design a ferroelectric material which has flat energy landscape so that the energy barriers for switching among different phases are vanishingly small? What are the necessary conditions to maximize the number of coexisting phases? (iv) How to design ferroelectric materials with a large tunable dielectric response? That is, at zero electric field, the material possesses very low polar-correlation and hence a very small dielectric constant, under the application of electric field, the material develops long range polar-correlation and hence a high dielectric response. Studying and developing these materials will deepen our understanding on the polarization responses in strongly coupled materials and the roles of molecular and nano, meso-, and micro-scale defects and structures on the polarization responses. On the application front, besides ECE, these dielectrics will also have great impact on micro-electronics and communications. (v) The multi-field effect, besides the electric, elastic and even magnetic effects, could be made use of to tune the energy landscape of polar-materials and hence enhance the ECE. Hence the question is what are the suitable material systems to develop and maximize the multi-field effects? (vi) Besides solid dielectric, liquid dielectrics with properly designed molecular structures and dipolar coupling can also exhibit a large ECE near the dipolar order-disorder transition. The study of order-disorder transition and their influence on entropy change and ECE will provide additional avenue to study dielectrics and understand relationship between the polar-ordering and dipolar entropy in dielectrics. (vii) Besides the regular ECE in which applying an electric field will induce dipolar ordering, there are dielectric material systems which can exhibit negative ECE in which the applied field will reduce the dipolar ordering and anomalous ECE in which applying an electric field pulse will generate cooling only. The question is how to control and balance the nano- and meso-scale polar coupling in dielectrics to achieve such effects? ECE in dielectrics provides an interesting and effective avenue to probe the polar-correlation in dielectrics. Thus the study of ECE in polar-dielectrics, besides the application values, will also deepen our understanding of strongly coupled materials systems, phase transitions, and materials systems with nano- and meso-scale disorders. Through the efforts of this DoE program, we have developed understandings for many questions and materials approaches for many hypotheses listed above. The major accomplishments include: (i) The first one to show that a giant ECE can be obtained in bulk materials of ferroelectric P(VDF-TrFE) copolymer, which has a large ß coefficient and high polarization, near FE-PE transition.[1,3,12] (ii) The first who developed the theoretical analyses on the upper bound of dipolar entropy change in polar-materials and the general approach to maximize the coexisting phases with vanishingly small switching fields among the coexisting phases[10,23] Experimental results confirm these theoretical predictions.[24] (iii) The first to show that the relaxor ferroelectrics, due to built-in defects structures at nano- and meso scale, exhibit a giant ECE over a broad temperature range.[1,3,7,14] (iv) The first to show that a large ECE can be obtained near order-disorder transition in dielectric fluids such as liquid crystals with large dielectric anisotropy. Also the study developed a general approach for developing dielectric fluids to achieve a large electric field induced entropy change.[26] (v) We are starting to explore the multi-field effect (multiferroic effect) in nanocomposites in which there exist large dielectric contrasts between the matrix and nanofilelrs and showed that a significantly enhanced ECE compared with polymer matrix.[36] (vi) By facially tuning the nano- and meso-scale dipolar coupling, we are the first to show that an anomalous ECE can be obtained in a relaxor/normal ferroelectric blend.[39] (vii) Introduced and demonstrated that the internal bias field approach can be effective in enhancing the EC response at low electric field. The result is significant since for practical applications, a low applied field is highly desired. (viii) A high sensitivity ECE characterization system has been developed. This program has made major contributions to the advancement of the EC materials and understandings of EC phenomena. To reflect the advancement in the EC materials development and scientific understandings on ECE through in this time period (from Sept. 1, 2007 to May 2015), this final report is written based on the reports complied each year through the program. Some early works on the ECE which were obtained using the indirect method are not included in this report.

36 MATERIALS SCIENCE↗

Quantum-dot based nanothermometry in optical plasmonic recording media

We report on the direct experimental determination of the temperature increment caused by laser irradiation in a optical recording media constituted by a polymeric film in which gold nanorods have been incorporated. The incorporation of CdSe quantum dots in the recording media allowed for single beam thermal reading of the on-focus temperature from a simple analysis of the two-photon excited fluorescence of quantum dots. Experimental results have been compared with numerical simulations revealing an excellent agreement and opening a promising avenue for further understanding and optimization of optical writing processes and media.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Polymer-based electrocaloric cooling devices

Cooling devices (i.e., refrigerators or heat pumps) based on polymers which exhibit a temperature change upon application or removal of an electrical field or voltage, (e.g., fluoropolymers or crosslinked fluoropolymers that exhibit electrocaloric effect).

42 ENGINEERING↗

First-principles electronic structure and formation energies of group V and VII impurities in the α-Fe{sub 2}O{sub 3} alloys

Based on density functional theory, the electronic structures, formation energy, and transition level of the selected group V and VII impurities in α-Fe{sub 2}O{sub 3} are investigated by means of first-principles methods. Numerical results show that the group V and VII atoms-doped α-Fe{sub 2}O{sub 3} can be energetically favorable under the Fe-rich condition. Group V atom substituting O atom can induce the acceptor impurity level, while the deep donor impurity states are formed inside the band gap when group VII atom substitute O atom in the α-Fe{sub 2}O{sub 3}. Moreover, our results show that halogen atom F substituting O atom should be very easy in the α-Fe{sub 2}O{sub 3}. In addition, our results also show that for both group V and VII atom-doped α-Fe{sub 2}O{sub 3}, the upper sides of valence band are modified obviously, while the conduction band edge does not change.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles survey on the doping of Ga in Nd{sub 2}Fe{sub 14}B

The preferential site substitution of Fe by Ga and its effect on magnetic moments have been studied in Nd{sub 2}Fe{sub 14}B by a first-principles density functional calculation. The calculated substitution energies of Ga are positive values and unfavorable for the Ga substitution at the sites of 8j{sub 2}, 16k{sub 1}, and 4e, while those are negative values and favorable for the Ga substitution at the sites of 4c, 8j{sub 1}, and 16k{sub 2}, in good agreement with the experimental results. The Ga atom shows a small induced negative moment with a size of about 0.2 μ{sub B.} The magnetic moments of Fe with the nearest neighbor of Ga reduce by about 0.1–0.2 μ{sub B} while the moments of Nd with the Ga nearest neighbors are enhanced slightly. These magnetic moment changes originate from the hybrid of the Ga 4p- with the Fe 3d- or the Nd 5d-electron states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exchange interaction in hexagonal MnRhP from first-principles studies

Electronic structure and magnetic properties for MnRhP have been studied from a first-principles density functional calculation. The calculated lattice constants, a = 6.228 Å and c = 3.571 Å, are in good agreement with the experimental values of a = 6.223 Å and c = 3.585 Å. The calculated moment of Mn is 3.1 μ{sub B}/atom, resulting in a total moment of 3.0 μ{sub B}/atom due to small moments induced at Rh and P sites. The magnetic moment of Mn decreases with unit cell size. The exchange interactions are dominated by positive Mn-Mn exchange coupling (J{sub Mn−Mn}), implying a stable ferromagnetic ordering in Mn sublattice. In particular, J{sub Mn−Mn} shows a maximum value (1.5 mRy) at the the optimized unit cell size. The structural distortion or unit cell size change will affect J{sub Mn−Mn}, which is intimately related to the magneto-elastic and magneto-caloric effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A high-k ferroelectric relaxor terpolymer as a gate dielectric for orgnaic thin film transistors

Poly(vinylidenefluoride-trifluoroethylene-chlorofluoroethylene) (P(VDF-TrFE-CFE)) is a ferroelectric terpolymer relaxor with a static dielectric constant of 50, which was developed using defect modification to eliminate remnant polarization in the normal ferroelectric PVDF. In this work, this solution processable terpolymer was used as the gate insulator in bottom gated organic thin-film transistors with a pentacene semiconductor layer. Due to the high dielectric constant of P(VDF-TrFE- CFE), a large capacitive coupling between the gate and channel can be achieved which causes a high charge concentration at the interface of the semiconductor and dielectric layers. In this device, an on/ off ratio of 104 and a low minimum operation gate voltage (5-10 V) were attained

Wu, Shan↗

Effect of Bending Stiffness of the Electroactive Polymer Element on the Performance of a Hybrid Actuator System (HYBAS)

An electroactive polymer (EAP)-ceramic hybrid actuation system (HYBAS) was developed recently at NASA Langley Research Center. This paper focuses on the effect of the bending stiffness of the EAP component on the performance of a HYBAS, in which the actuation of the EAP element can match the theoretical prediction at various length/thickness ratios for a constant elastic modulus of the EAP component. The effects on the bending stiffness of the elastic modulus and length/thickness ratio of the EAP component were studied. A critical bending stiffness to keep the actuation of the EAP element suitable for a rigid beam theory-based modeling was found for electron irradiated P(VDF-TrFE) copolymer. For example, the agreement of experimental data and theoretical modeling for a HYBAS with the length/thickness ratio of EAP element at 375 times is demonstrated. However, the beam based theoretical modeling becomes invalid (i.e., the profile of the HYBAS movement does not follow the prediction of theoretical modeling) when the bending stiffness is lower than a critical value.

Xu, Tian-Bing↗

A Hybrid Actuation System Demonstrating Significantly Enhanced Electromechanical Performance

A hybrid actuation system (HYBAS) utilizing advantages of a combination of electromechanical responses of an electroactive polymer (EAP), an electrostrictive copolymer, and an electroactive ceramic single crystal, PZN-PT single crystal, has been developed. The system employs the contribution of the actuation elements cooperatively and exhibits a significantly enhanced electromechanical performance compared to the performances of the device made of each constituting material, the electroactive polymer or the ceramic single crystal, individually. The theoretical modeling of the performances of the HYBAS is in good agreement with experimental observation. The consistence between the theoretical modeling and experimental test make the design concept an effective route for the development of high performance actuating devices for many applications. The theoretical modeling, fabrication of the HYBAS and the initial experimental results will be presented and discussed.

Su, Ji↗

Theoretical Evaluation of Electroactive Polymer Based Micropump Diaphragm for Air Flow Control

An electroactive polymer (EAP), high energy electron irradiated poly(vinylidene fluoride-trifluoroethylene) [P(VDFTrFE)] copolymer, based actuation micropump diaphragm (PAMPD) have been developed for air flow control. The displacement strokes and profiles as a function of amplifier and frequency of electric field have been characterized. The volume stroke rates (volume rate) as function of electric field, driving frequency have been theoretically evaluated, too. The PAMPD exhibits high volume rate. It is easily tuned with varying of either amplitude or frequency of the applied electric field. In addition, the performance of the diaphragms were modeled and the agreement between the modeling results and experimental data confirms that the response of the diaphragms follow the design parameters. The results demonstrated that the diaphragm can fit some future aerospace applications to replace the traditional complex mechanical systems, increase the control capability and reduce the weight of the future air dynamic control systems. KEYWORDS: Electroactive polymer (EAP), micropump, diaphragm, actuation, displacement, volume rate, pumping speed, clamping ratio.

Xu, Tian-Bing↗