Engineering Papers⌕ Search

Engineering topics

Zhang, Peng

Publications and source records attributed to Zhang, Peng.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Electrical Manipulation of Topological Phases in a Quantum Anomalous Hall Insulator

Quantum anomalous Hall phases arising from the inverted band topology in magnetically doped topological insulators have emerged as an important subject of research for quantization at zero magnetic fields. Though necessary for practical implementation, sophisticated electrical control of molecular beam epitaxy (MBE)-grown quantum anomalous Hall matter have been stymied by growth and fabrication challenges. Here, in this study, a novel procedure is demonstrated, employing a combination of thin-film deposition and 2D material stacking techniques, to create dual-gated devices of the MBE-grown quantum anomalous Hall insulator, Cr-doped (Bi,Sb) 2 Te 3 . In these devices, orthogonal control over the field-induced charge density and the electric displacement field is demonstrated. A thorough examination of material responses to tuning along each control axis is presented, realizing magnetic property control along the former and a novel capability to manipulate the surface exchange gap along the latter. Through electrically addressing the exchange gap, the capabilities to either strengthen the quantum anomalous Hall state or suppress it entirely and drive a topological phase transition to a trivial state are demonstrated. The experimental result is explained using first principle theoretical calculations, and establishes a practical route for in situ control of quantum anomalous Hall states and topology.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Influence of discharge polarity on streamer breakdown criterion of ambient air in a non-uniform electric field

Streamer breakdown of atmospheric air with non-uniform dc electric field in a needle-to-plate electrode configuration is studied using a semi-analytic model and experimental measurements. A high voltage (either positive or negative) is applied to a hollow needle with 0.51 mm outer diameter and 0.25 mm inner diameter separated from a planar ground electrode by a gap distance of 0.1–1.4 cm. Breakdown voltages are recorded for both positive and negative discharge polarities. Empirical relations between the critical avalanche size for streamer breakdown and the gap distance are proposed. Using these empirical relations, a semi-analytic model based on Meek's criterion for streamer breakdown is developed to accurately predict the measured breakdown voltages. It is found that for pd > 380 Torr cm (or d > 0.5 cm at one atmosphere) streamer breakdown of ambient air occurs at a lower applied voltage for a positively biased needle compared to that with a negatively biased needle, referred as the polarity effect. For pd < 380 Torr cm breakdown is attained at a lower applied voltage with a negatively biased needle compared to that with a positively biased needle, and breakdown mode transits from the polarity effect to the so called inverted polarity effect.

42 ENGINEERING↗
DOE OSTI2022

Measured Potential Profile in a Quantum Anomalous Hall System Suggests Bulk-Dominated Current Flow

Ideally, quantum anomalous Hall systems should display zero longitudinal resistance. Yet in experimental quantum anomalous Hall systems elevated temperature can make the longitudinal resistance finite, indicating dissipative flow of electrons. Here, we show that the measured potentials at multiple locations within a device at elevated temperature are well-described by solution of Laplace's equation, assuming spatially-uniform conductivity, suggesting non-equilibrium current flows through the two-dimensional bulk. Extrapolation suggests that at even lower temperatures current may still flow primarily through the bulk rather than, as had been assumed, through edge modes. In conclusion, an argument for bulk current flow previously applied to quantum Hall systems supports this picture.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Safety-assured, real-time neural active fault management for resilient microgrids integration

Federated-learning-based active fault management (AFM) is devised to achieve real-time safety assurance for microgrids and the main grid during faults. AFM was originally formulated as a distributed optimization problem. Here, federated learning is used to train each microgrid's network with training data achieved from distributed optimization. The main contribution of this work is to replace the optimization-based AFM control algorithm with a learning-based AFM control algorithm. The replacement transfers computation from online to offline. With this replacement, the control algorithm can meet real-time requirements for a system with dozens of microgrids. By contrast, distributed-optimization-based fault management can output reference values fast enough for a system with several microgrids. More microgrids, however, lead to more computation time with optimization-based method. Distributed-optimization-based fault management would fail real-time requirements for a system with dozens of microgrids. Controller hardware-in-the-loop real-time simulations demonstrate that learning-based AFM can output reference values within 10 ms irrespective of the number of microgrids.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Photoemission Induced Plasma Breakdown (Update)

Laser-induced photoemission of electrons offers opportunities to trigger and control plasmas and discharges. However, the underlying mechanisms are not sufficiently characterized to be fully utilized. Photoemission is highly nonlinear, achieved through multiphoton absorption, above threshold ionization, photo-assisted tunneling, etc., where the dominant process depends on the work function of the material, photon energy and associated fields, surface heating, background fields, etc. To characterize the effects of photoemission on breakdown, breakdown experiments were performed and interpreted using a 0D plasma discharge circuit model and quantum model of photoemission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Parametric studies of stream instability-induced higher harmonics in plasma ionization breakdown near an emissive dielectric surface

Here, in this work, we comprehensively investigate the generation of higher harmonic (HH) electric fields normal to the applied rf electric field in multipactor-coexisting plasma breakdown by fully kinetic particle-in-cell (PIC) simulations and a theoretical model. Firstly, a base case at driving frequency 1 GHz, transverse rf electric field amplitude 3 MV m –1 , and background gas pressure 0.2 Torr, is studied in detail. The enhanced harmonic frequency observed is around ten times the fundamental rf frequency, significantly lower than the Langmuir frequency. A theoretical model reveals that the fundamental mechanism of HHs generation is stream–plasma instability, which originates from stream-like secondary electron emission interacting with plasma. The resulting HH frequency and the growth rate of its oscillating amplitude from the theoretical model, agree well with the PIC simulations. With increasing pressure, the HH oscillations are found to be significantly reduced. This is because at higher pressure the gas ionization rate is higher, which causes a more rapidly increasing plasma density, leaving less time for the growth of instability. Furthermore, the parameter space in terms of background gas pressure and rf field amplitude within which the HHs appear is revealed. Finally, the effect of the driving rf frequency on HHs is also investigated, and it is found that the instability-induced oscillating HHs field remains when the driving frequency is increased to 2 GHz, however, it is highly reduced at higher driving frequency of 5 GHz, as oscillations at the fundamental frequency start playing a more important role.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Quantum-Inspired Power System Reliability Assessment

To enable an in-depth study of power system operation and planning, the assessment of standard reliability indices is inevitable. The Monte Carlo Simulation (MCS) approach is a broadly used method in replacing the analytical methods in reliability indices assessment. The accuracy of MCS, however, highly depends on the sampling size, and hence, a complicated system with large number of components requires a large sampling size and daunting computational effort. To address this shortcoming, we, in this paper attempt to take advantage of potentials of the quantum computing (QC) for power system reliability assessment by realizing the following contributions: 1) an innovative quantum model designed for reliability assessment; 2) a quantum circuit that achieves the quadratic speed up compared to the classical MCS method; 3) an efficient quantum amplitude estimation (QAE) algorithm to accurately evaluate the reliability indices. The accuracy and efficacy of the quantum reliability method are extensively verified and demonstrated on both radial and mesh distribution systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Ligand Coverage and Exciton Delocalization Control Chiral Imprinting in Perovskite Nanoplatelets

Chiral perovskites have generated significant recent interest, yet little is known about how their chiro-optical properties arise. In this study, chiral methylammonium lead halide perovskite nanoplatelets (NPLs) with varied halide and ligand compositions are prepared using direct synthetic methods. Circular dichroism (CD) and 1 H NMR studies find a non-linear relationship between the chiroptical properties and the ratio of chiral phenylethylammonium (PEA) to achiral octylamine (OA) ligands on the NPL surface. We use density functional theory (DFT) computations and a chiral imprinted particle-in-a-box model to rationalize the experimentally observed CD spectra and find that the saturation point of the induced chirality depends on the size of the perovskite exciton relative to the size of the ligands. Temperature-dependent CD and 1 H NMR studies, combined with DFT analysis, show that both the CD intensity and sign depend strongly on the structure and orientation of the ligands. Furthermore, this work reveals the complex nature of chiral imprinting in perovskite nanostructures and establishes a simple physical model for ligand-induced chiral imprinting to guide the further development of chiral materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Employing Interacting Qubits for Distributed Microgrid Control

To empower flexible and scalable operations, distributed control of multi-inverter microgrids, based on classical communication networks among distributed energy resources, has attracted considerable attention as it can guarantee synchronization and provide suitable remedies to the problem of improper power sharing. Notwithstanding this, resilience of the current schemes on classical communication makes microgrids vulnerable to cyber attacks. Inspired by recent revolutionary breakthroughs in quantum communication, in this paper, we devise a novel synchronization mechanism. We extend the synchronization framework utilized in distributed control algorithms to networks of quantum systems by generating pinning terms and coupling mechanism for the new synchronization rule via exploiting proper quantum jump operators and observables, and show that the quantum system will converge to a time-variant target state. Our devised quantum distributed controller (QDC) gives rise to a novel quantum communication scheme for distributed control of microgrids and enables microgrids to exploit the state-of-the-art quantum communication frameworks as communication infrastructure. Finally, test results on two representative AC and DC networked microgrids validate the efficacy and universality of the quantum distributed control.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Probing the mesoscopic size limit of quantum anomalous Hall insulators

The inelastic scattering length (L s ) is a length scale of fundamental importance in condensed matters due to the relationship between inelastic scattering and quantum dephasing. In quantum anomalous Hall (QAH) materials, the mesoscopic length scale L s plays an instrumental role in determining transport properties. Here we examine L s in three regimes of the QAH system with distinct transport behaviors: the QAH, quantum critical, and insulating regimes. Although the resistance changes by five orders of magnitude when tuning between these distinct electronic phases, scaling analyses indicate a universal L s among all regimes. Finally, mesoscopic scaled devices with sizes on the order of L s were fabricated, enabling the direct detection of the value of L s in QAH samples. Our results unveil the fundamental length scale that governs the transport behavior of QAH materials.

42 ENGINEERING↗