Engineering Papers⌕ Search

Engineering topics

Zhang, Lu

Publications and source records attributed to Zhang, Lu.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Experimental Protocols for Studying Organic Non-aqueous Redox Flow Batteries

We report that Redox flow batteries (RFBs) are promising devices for grid-scale energy storage due to the decoupling of power and energy, which can be independently scaled by the electrode area and storage tank size, respectively. To date, only aqueous RFBs, such as the vanadium RFB, have been implemented commercially. Nevertheless, the limited energy densities and high-cost materials may preclude their wider market penetration. Organic non-aqueous redox-flow batteries (O-NRFBs), which utilize redox-active organic molecules (ROMs), have been offered as an attractive alternative. Many possible advantages include the use of earth-abundant elements (C, H, N, O, S, F), wherein the ROMs can be prepared from low-cost and sustainable materials. Additionally, a large variety of electroactive moieties are accessible as building blocks, providing a synthetic platform to tune the properties of ROMs through rational design. As a consequence, the development of novel ROMs has attracted researchers with diverse backgrounds, prompting remarkable innovations in the past decade. However, consistency in experimental protocols (e.g., electrochemical methods, cycling stability, experimental conditions) has not coincided with this uptick in research, leading to sometimes ambiguous and incomparable results. This is further convoluted by the complexity innate to battery development, such as cell design, detection, and characterization of reactions and active components. The O-NRFB application imposes stringent requirements on the physical or/and chemical processes involved in electrochemical cycling. Yet such considerations are often overlooked. Further, while quantum mechanical calculations provide a convenient tool for evaluating and selecting ROM candidates, this simulation is not always performed. Thus, in this Energy Focus, we detail a means to standardize experimental protocols for studies of O-NRFBs and suggest practices to facilitate fundamental understanding and development of ROMs.

25 ENERGY STORAGE↗
DOE OSTI2021

Cross-Platform Classifier of Chemical Stability for Charged Redoxmers

The development of new redox flow battery chemistries is hampered by time-consuming organic syntheses and electrochemical characterization of candidate redoxmer molecules. Here, we use Sure Independence Screening and Sparsifying Operator (SISSO) to demonstrate a cross-platform classifier for chemical stability of charged redoxmers in electrolyte solutions. This SISSO model yields a single formula to separate positively charged dialkoxyarene catholytes and negatively charged pyridinium anolytes into stable and unstable species in acetonitrile-based electrolytes as probed through cyclic voltammetry measurements. Using such classifiers, the stability of new compounds across different synthetic platforms can be rapidly assessed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Discovery of Energy Storage Molecular Materials Using Quantum Chemistry-Guided Multiobjective Bayesian Optimization

Redox flow batteries (RFBs) are a promising technology for stationary energy storage applications due to their flexible design, scalability, and low cost. In RFBs, energy is carried in flowable redoxactive materials (redoxmers) which are stored externally and pumped to the cell during operation. Further improvements in the energy density of RFBs necessitates redoxmer designs with wider redox potential windows and higher solubility. Additionally, designing redoxmers with a fluorescence-enabled self-reporting functionality allows monitoring of the state of health of RFBs. To accelerate the discovery of redoxmers with desired properties, state-of-the- art machine learning ( ML) methods, such as multiobjective Bayesian optimization (MBO), are useful. Here, we first employed density functional theory calculations to generate a database of reduction potentials, solvation free energies, and absorption wavelengths for 1400 redoxmer molecules based on a 2,1,3-benzothiadiazole (BzNSN) core structure. From the computed properties, we identified 22 Pareto-optimal molecules that represent best trade-off among all of the desired properties. We further utilized these data to develop and benchmark an MBO approach to identify candidates quickly and efficiently with multiple targeted properties. With MBO, optimal candidates from the 1400-molecule data set can be identified at least 15 times more efficiently compared to the brute force or random selection approach. Importantly, we utilized this approach for discovering promising redoxmers from an unseen database of 1 million BzNSN-based molecules, where we discovered 16 new Pareto-optimal molecules with significant improvements in properties over the initial 1400 molecules. Furthermore, we anticipate that this active learning technique is general and can be utilized for the discovery of any class of functional materials that satisfies multiple desired property criteria.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Engineering the Si Anode Interface via Particle Surface Modification: Embedded Organic Carbonates Lead to Enhanced Performance

Si nanoparticles (SiNPs) are recognized as a promising anode material for next-generation high-energy lithium-ion batteries. However, due to the more stringent requirements resulting from severe volume change, the solid-electrolyte interphase (SEI) on SiNPs plays a critical role in determining their cycling performance. Engineering the interface for higher stability has become an effective yet challenging approach to accommodate the deterioration of the silicon anode from the repeated lithiation/delithiation process. Herein, we report a novel approach of engineering a covalently bonded organic monolayer of ethylene carbonates onto the surface of the SiNPs that can help form a sturdy SEI. Finally, this molecule-level surface modification provides an effective approach to enable high-energy lithium-ion batteries with Si anodes.

25 ENERGY STORAGE↗
DOE OSTI2021

TEMPO allegro: liquid catholyte redoxmers for nonaqueous redox flow batteries

Redoxmers are organic active molecules storing energy in redox flow batteries (RFBs). Liquid redoxmers represent an extreme scenario where maximum concentration may be achieved by minimizing supporting solvents, thus maximizing the energy density of RFBs. Herein, a series of (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO)-based high potential (catholyte) liquid redoxmers, TEMPO-EG1, TEMPO-EG2, and TEMPO-EG3, were developed by incorporating polyethylene glycol (PEG) chains. Such modifications not only afford dramatic physical changes from solid to liquid and full miscibility in acetonitrile, but also impact the redox behavior. DFT calculations indicate that the incorporated PEG chains impact the charge distribution, which may account for the electrochemical changes. Importantly, compared to our previous liquid catholytes, the new redoxmers exhibit lower viscosity, which is desired for enhancing high concentration cycling performance. Furthermore, by using a hybrid flow cell, TEMPO-EG1 demonstrated more than 70% capacity retention over 100 cycles at 0.1 M and 66% capacity retention at 0.5 M, affording excellent cyclability at various concentrations. The study exemplifies how molecular engineering tuned the rheological properties of redoxmers, such as viscosity, to improve the high concentration cycling performance of RFBs, which may represent a promising avenue for a high energy density and low-cost flow battery system.

25 ENERGY STORAGE↗
DOE OSTI2021

Crowded electrolytes containing redoxmers in different states of charge: Solution structure, properties, and fundamental limits on energy density

Nonaqueous redox flow batteries use liquid electrolytes containing redox-active organic molecules (redoxmers) as their energy storage medium. To maximize energy density, the redoxmer concentration needs to be maximized while maintaining low viscosity and high ionic conductivity. During charge, a redoxmer molecule pairs with an ion in the electrolyte while another ion migrates across the membrane to maintain electric neutrality. In a crowded electrolyte, this reconstitution changes physical and chemical properties of the solution. To explore these behaviors, a phenothiazine redoxmer fully miscible with acetonitrile was used, and electrochemical charge was mimicked by chemical oxidation. The solutions were examined using small-angle X-ray scattering, nuclear magnetic resonance, and conductometry and modeled using classical molecular dynamics. Overall, our study indicates that physical and structural properties of redoxmer solutions in both states of charge make it exceedingly difficult to increase the redoxmer concentrations over 2 M at any temperature without compromising dynamic properties of such solutions. The cause for this limitation is proximity to a gel-like regime in which fluidity, diffusivity, and ionic conductivity exponentially decrease with increasing concentration. This tendency is compounded by non-Arrhenius behavior of the electrolyte: a small increase in the concentration outruns gains in fluidity and conductivity at a higher temperature. Thus the properties of crowded electrolytes generally make it impossible to operate when gel-like behavior sets in. Pushing the redoxmer concentration to 2.5-3 M might be possible for small redoxmer molecules, but it would require the use of ionic liquid electrolytes at 340-360 K. (C) 2021 Elsevier B.V. All rights reserved.

25 ENERGY STORAGE↗
DOE OSTI2021

Elastic Wave Propagation in Curvilinear Coordinates with Mesh Refinement Interfaces by a Fourth Order Finite Difference Method

In this work, we develop a fourth order accurate finite difference method for the three dimensional elastic wave equation in isotropic media with the piecewise smooth material property. In our model, the material property can be discontinuous at curved interfaces. The governing equations are discretized in second order form on curvilinear meshes by using a fourth order finite difference operator satisfying a summation-by-parts property. The method is energy stable and high order accurate. The highlight is that mesh sizes can be chosen according to the velocity structure of the material so that computational efficiency is improved. At the mesh refinement interfaces with hanging nodes, physical interface conditions are imposed by using ghost points and interpolation. With a fourth order predictor-corrector time integrator, the fully discrete scheme is energy conserving. Numerical experiments are presented to verify the fourth order convergence rate and the energy conserving property.

58 GEOSCIENCES↗
DOE OSTI2021

Time-Resolved Observation of Hole Tunneling in van der Waals Multilayer Heterostructures

We reported a time-resolved study of quantum-mechanical tunneling of holes between two MoSe 2 monolayers that are separated by a monolayer WS 2 energy barrier. Four-layer heterostructures of MoSe 2 /WS 2 /MoSe 2 /graphene, as well as control samples, were fabricated by mechanical exfoliation and dry transfer techniques. To time-resolve the hole tunneling process, an ultrashort laser pulse was used to excite electrons and holes in both MoSe 2 layers. Here, by utilization of the graphene layer to eliminate carriers in the third MoSe 2 layer, the first MoSe 2 layer is selectively populated with the holes, which then tunnel to the third MoSe 2 layer. By monitoring decay of the hole population with an ultrashort probe pulse, we measure a hole tunneling time of about 20 ps, which is found to slightly increase with the injected carrier density. Besides the fundamental interests of real-time observation of the quantum-mechanical tunneling effect across a nanometer barrier, these results provide quantitative understanding on tunneling mechanisms of charge transfer in van der Waals heterostructures, which is useful for designing sophisticated van der Waals multilayer heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Restorable Neutralization of Poly(acrylic acid) Binders toward Balanced Processing Properties and Cycling Performance for Silicon Anodes in Lithium-Ion Batteries

Neutralization of poly(acrylic acid) (PAA)-based binders using lithium hydroxide is a common strategy for fabricating silicon anode laminates, which improves rheological properties of slurries toward high-quality electrode laminates. However, the significantly increased basicity causes degradation of Si particles while the irreversible conversion of carboxylic acid groups to lithium carboxylates undermines the binding strength, collectively leading to adverse cycling performance of the fabricated Si anodes. Herein, a novel neutralization process for PAA binders is developed. A weak base, ammonia (NH 3 ), was discovered as a neutralizing agent that still promotes rheological response of binder solutions but results in a reduced pH increase. Interestingly, the resulting ammonium carboxylate groups may cleave during the drying process to restore the neutralized PAA (PAA-NH 3 ) binders to their pristine states. The best-performing composition of 50% neutralization (PAA-50%NH 3 ) provides comparable rheological response as a PAA-Li binder as well as much improved cycling performance. Additionally, the half-cells using the PAA-50%NH 3 binder can deliver 60% capacity retention over 100 cycles at C/3 rate, affording a 23.8% increase compared to PAA-Li half-cells. This restorable neutralization process of PAA binders represents an innovative strategy of mitigating issues from slurry processing of Si particles to achieve concurrent improvements in high-quality lamination and cycling performance.

25 ENERGY STORAGE↗
DOE OSTI2020

IImprove hydrogen sorption kinetics of MgH2 by doping carbon-encapsulated iron-nickel nanoparticles

Magnesium hydride (MgH2) with excellent hydrogen storage kinetics is important for the wide application of hydrogen energy. Herein, to accelerate the sorption kinetics of MgH2 and lower its dehydrogenation temperature, we design and prepare a carbon film coated dual transition metal alloy, the Fe0.64Ni0.36@C composite with a coreshell structure, and employ it as an additive to synthesize MgH2–Fe0.64Ni0.36@C system by ball-milling and hydriding combustion method. In contrast to pure MgH2, the initial hydrogen release temperature of the MgH2–Fe0.64Ni0.36@C composite lowers to 250°C from 480°C and the composite can absorb 5.18 wt% H2 within 20 min (150°C, 3 MPa H2). More importantly, the apparent activation energy of the dehydrogenation for decomposition of Fe0.64Ni0.36@C-doped MgH2 reduced from 162.8 ± 8.3 kJ/mol to 86.9 ± 4.6 kJ/mol. It is believed that the Fe@C and Mg2Ni/Mg2NiH4 formed on the surface of Mg/MgH2 act as intermediates of electron transfer between Mg2+ and H–, which synergistically enhanced the hydrogen absorption and desorption kinetics properties of the MgH2. Moreover, the MgH2 co-doped with the multiple in-situ formed active particles shows excellent cycling performance, indicative of potential application in practical hydrogen storage in the near future.

Ding, Zhenmin↗
DOE OSTI2020

Two-electron redox active molecules with high capacity and energy density for energy storage applications

A non-aqueous redox flow battery includes a catholyte including a compound of formula (I): wherein E1 and E2 are independently O, S, S═O, S(═O)2, Se, NR11, or PR11; The compounds of the present technology are capable of undergoing a reversible two-electron transfer process, thus leading to high efficiency of molecular design and an increase in the overall energy density.

Huang, Jinhua↗
DOE OSTI2020

Competitive Pi-Stacking and H-Bond Piling Increase Solubility of Heterocyclic Redoxmers

Redoxmers are organic molecules that carry electric charge in flow batteries. In many instances, they consist of heteroaromatic moieties modified with appended groups to prevent stacking of the planar cores and increase solubility in liquid electrolytes. This higher solubility is desired as it potentially allows achieving greater energy density in the battery. However, the present synthetic strategies often yield bulky molecules with low molarity even when they are neat and still lower molarity in liquid solutions. Fortunately, there are exceptions to this rule. Here, we examine one well-studied redoxmer, 2,1,3-benzothiadiazole, which has solubility similar to 5.7 M in acetonitrile at 25 degrees C. We demonstrate computationally and prove experimentally that the competition between two packing motifs, face-to-face it-stacking and random N-H bond piling, introduces frustration that confounds nucleation in crowded solutions. Our findings and examples from related systems suggest a complementary strategy for the molecular design of redoxmers for high energy density redox flow cells.

25 ENERGY STORAGE↗
DOE OSTI2020

Self-Assembled Solute Networks in Crowded Electrolyte Solutions and Nanoconfinement of Charged Redoxmer Molecules

Redoxmers are electrochemically active organic molecules storing charge and energy in electrolyte fluids circulating through redox flow batteries (RFBs). Such molecules typically have solvent-repelling cores and solvent-attracting pendant groups introduced to increase solubility in liquid electrolytes. These two features can facilitate nanoscale aggregation of the redoxmer molecules in crowded solutions. In some cases, this aggregation leads to the emergence of continuous networks of solute molecules in contact, and the solution becomes microscopically heterogeneous. In this study, we used small-angle X-ray scattering (SAXS) and molecular dynamics modeling to demonstrate formation of such networks and examine structural factors controlling this self-assembly. We also show that salt ions become excluded from these solute aggregates into small pockets of electrolytes, where these ions strongly associate. This confinement by exclusion is also likely to occur to charged redoxmer molecules in a “sea” of neutral precursors coexisting in the same solution. Here, we demonstrate that the decay lifetime of the confined charged molecules in such solutions can increase several fold compared to dilute solutions. We attribute this behavior to a “microreactor effect” on reverse reactions of the confined species during their decomposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Fluorescence-Enabled Self-Reporting for Redox Flow Batteries

Monitoring battery health is challenging. Self-reporting enables the rapid health assessment of redox flow batteries (RFBs) and provides insight into degradation mechanisms of electrochemically active molecules (redoxmers). In this study, we introduce fluorescence as an orthogonal property to probe this chemistry in situ. An established anolyte redoxmer, 2,1,3-benzothiadiazole, is rendered an efficient blue-green fluorophore through minimalistic derivatization. One of the derivatives is electrochemically reversible with a long lifetime and cycling stability in the charged state. Spectroscopic measurements on this new redoxmer reveal strong effects of the electrolyte cation on the fluorescence that are useful for probing the solvent microenvironment. Using this probe, we demonstrate proof-of-concept in situ crossover sensing and characterize the effects of electrolyte composition on this crossover. In this way, real-time tracing of redoxmers in a flow cell is demonstrated, paving the way to include still more self-reporting functions into the redoxmers.

25 ENERGY STORAGE↗