Engineering Papers⌕ Search

Engineering topics

Zhang, Li

Publications and source records attributed to Zhang, Li.

At least 37 records · Page 2

The genetic basis for panicle trait variation in switchgrass ( Panicum virgatum )

Grass species exhibit large diversity in panicle architecture influenced by genes, the environment, and their interaction. The genetic study of panicle architecture in perennial grasses is limited. In this study, we evaluate the genetic basis of panicle architecture including panicle length, primary branching number, and secondary branching number in an outcrossed switchgrass QTL population grown across ten field sites in the central USA through multi-environment mixed QTL analysis. We also evaluate genetic effects in a diversity panel of switchgrass grown at three of the ten field sites using genome-wide association (GWAS) and multivariate adaptive shrinkage. Furthermore, we search for candidate genes underlying panicle traits in both of these independent mapping populations. Overall, 18 QTL were detected in the QTL mapping population for the three panicle traits, and 146 unlinked genomic regions in the diversity panel affected one or more panicle trait. Twelve of the QTL exhibited consistent effects (i.e., no QTL by environment interactions or no QTL × E), and most (four of six) of the effects with QTL × E exhibited site-specific effects. Most (59.3%) significant partially linked diversity panel SNPs had significant effects in all panicle traits and all field sites and showed pervasive pleiotropy and limited environment interactions. Panicle QTL co-localized with significant SNPs found using GWAS, providing additional power to distinguish between true and false associations in the diversity panel.

59 BASIC BIOLOGICAL SCIENCES↗

Stability of a Mixed–Valence Hydrous Iron–Rich Oxide: Implications for Water Storage and Dynamics in the Deep Lower Mantle

Incorporation of water into mantle compositions can have significant effects on the phase relations in the systems. Here, we synthesized an iron-rich hexagonal hydrous phase (referred to as "HH1-phase") under the high pressure-temperature (P-T) conditions of the deep lower mantle and determined the crystal structure of the HH1-phase at 79 GPa using the multigrain crystallography method. The chemical formula obtained was Fe 12.76 O 18 H x (x ~ to 4.5) in the Fe-O-H system. To demonstrate the role of HH1-phase for water storage in multicomponent systems relevant to mantle compositions, we investigated the stability of HH1-phase in both MgO-rich pyrolitic and SiO 2 -rich basaltic compositions. Our results indicate that the HH1-phase serves as major water storage in a pyrolitic composition, whereas the Al-rich CaCl 2 -type δ-phase and SiO 2 phase are major water storage phases in a SiO 2 -rich basaltic composition. Incorporation of considerable amounts of SiO 2 , MgO, and Al 2 O 3 into the HH1-phase expands its stability field from 98 GPa in the Fe-Al-O-H system to at least 108 GPa (corresponding to similar to 2,400 km depth) in the Mg-Si-Al-Fe-O-H system. Plumes of hot upwelling rock rooted at the base of the lower mantle have been proposed as a possible origin of hotspot volcanoes. The hydrous Fe-rich HH1-phase, if included into the material of upwelling plumes, will decompose on its rising to the upper part of the lower mantle and release water. Our results should provide constraints on water storage in the deep lower mantle and have implications for deep mantle dynamics.

58 GEOSCIENCES↗

Microbial Community Structure and Ecological Networks during Simulation of Diatom Sinking

Microbial-mediated utilization of particulate organic matter (POM) during its downward transport from the surface to the deep ocean constitutes a critical component of the global ocean carbon cycle. However, it remains unclear as to how high hydrostatic pressure (HHP) and low temperature (LT) with the sinking particles affects community structure and network interactions of the particle-attached microorganisms (PAM) and those free-living microorganisms (FLM) in the surrounding water. In this study, we investigated microbial succession and network interactions in experiments simulating POM sinking in the ocean. Diatom-derived 13C- and 12C-labeled POM were used to incubate surface water microbial communities from the East China Sea (ECS) under pressure (temperature) of 0.1 (25 °C), 20 (4 °C), and 40 (4 °C) MPa (megapascal). Our results show that the diversity and species richness of the PAM and FLM communities decreased significantly with HHP and LT. Microbial community analysis indicated an increase in the relative abundance of Bacteroidetes at high pressure (40 MPa), mostly at the expense of Gammaproteobacteria, Alphaproteobacteria, and Gracilibacteria at atmospheric pressure. Hydrostatic pressure and temperature affected lifestyle preferences between particle-attached (PA) and free-living (FL) microbes. Ecological network analysis showed that HHP and LT enhanced microbial network interactions and resulted in higher vulnerability to networks of the PAM communities and more resilience of those of the FLM communities. Most interestingly, the PAM communities occupied most of the module hubs of the networks, whereas the FLM communities mainly served as connectors of the modules, suggesting their different ecological roles of the two groups of microbes. These results provided novel insights into how HHP and LT affected microbial community dynamics, ecological networks during POM sinking, and the implications for carbon cycling in the ocean.

59 BASIC BIOLOGICAL SCIENCES↗

HP-PdF2-type FeCl2 as a potential Cl-carrier in the deep Earth

Here, we report for the first time the formation of a HP-PdF 2 -type FeCl 2 phase (space group Pa$\bar{3}$), through high pressure-temperature (P-T) reactions in the hydrous systems (Mg 0.6 Fe 0.4 )SiO 3 –H 2 O–NaCl and FeO2H–NaCl in a laser-heated diamond-anvil cell up to 108 GPa and 2000 K. Applying single-crystal X-ray diffraction (XRD) analysis to individual submicrometer-sized grains, we have successfully determined the crystal structure of the as-synthesized FeCl 2 phase, in agreement with our theoretical structure search results. In situ high P-T XRD data revealed the substitution of Cl for OH(O) in such a cubic Pa$\bar{3}$ structure, demonstrating that this topology is a potential host for both H and Cl in the deep Earth. The chemical analysis of the recovered sample showed that the post-perovskite phase contains considerable amounts of Na 2 O and Fe 2 O 3 . The coexistence of the cubic FeCl 2 phase and post-perovskite suggests that the lowermost mantle could be a potential reservoir of Cl. The possible presence of volatiles such as H and Cl in the deep lower mantle would impact the composition and iron valence state of the post-perovskite phase.

58 GEOSCIENCES↗

A universal wet-chemistry synthesis of solid-state halide electrolytes for all-solid-state lithium-metal batteries

Solid-state halide electrolytes have gained revived research interests owing to their high ionic conductivity and high-voltage stability. However, synthesizing halide electrolytes from a liquid phase is extremely challenging because of the vulnerability of metal halides to hydrolysis. In this work, ammonium-assisted wet chemistry is reported to synthesize various solid-state halide electrolytes with an exceptional ionic conductivity (>1 microsiemens per centimeter). Microstrain-induced localized microstructure change is found to be beneficial to lithium ion transport in halide electrolytes. Furthermore, the interfacial incompatibility between halide electrolytes and lithium metal is alleviated by transforming the mixed electronic/ionic conductive interface into a lithium ion–conductive interface. Such all-solid-state lithium-metal batteries (ASSLMBs) demonstrate a high initial coulombic efficiency of 98.1% based on lithium cobalt oxide and a high discharge capacity of 166.9 microampere hours per gram based on single-crystal LiNi 0.6 Mn 0.2 Co 0.2 O 2 . This work provides universal approaches in both material synthesis and interface design for developing halide-based ASSLMBs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Altered Regional Homogeneity and Functional Connectivity during Microlesion Period after Deep Brain Stimulation in Parkinson’s Disease

Background. Patients with Parkinson’s disease (PD) undergoing deep brain electrode implantation experience a temporary improvement in motor symptoms before the electrical stimulation begins. We usually call this the microlesion effect (MLE), but the mechanism behind it is not clear. Purpose. This study aimed to assess the alterations in brain functions at the regional and whole-brain levels, using regional homogeneity (ReHo) and functional connectivity (FC), during the postoperative microlesion period after deep brain stimulation (DBS) in PD patients. Method. Resting-state functional MRI data were collected from 27 PD patients before and after the first day of DBS and 12 healthy controls (HCs) in this study. The ReHo in combination with FC analysis was used to investigate the alterations of regional brain activity in all the subjects. Results. There were increased ReHo in the basal ganglia-thalamocortical circuit (left supplementary motor area and bilateral paracentral lobule), whereas decreased ReHo in the default mode network (DMN) (left angular gyrus, bilateral precuneus), prefrontal cortex (bilateral middle frontal gyrus), and the cerebello-thalamocortical (CTC) circuit (Cerebellum_crus2/1_L) after DBS. In addition, we also found abnormal FC in the lingual gyrus, cerebellum, and DMN. Conclusion. Microlesion of the thalamus caused by electrode implantation can alter the activity of the basal ganglia-thalamocortical circuit, prefrontal cortex, DMN, and CTC circuit and induce abnormal FC in the lingual gyrus, cerebellum, prefrontal cortex, and DMN among PD patients. The findings of this study contribute to the understanding of the mechanism of MLE.

Luo, Bei↗

Evaluation and modification of ELM seasonal deciduous phenology against observations in a southern boreal peatland forest

Phenological transitions determine the timing of changes in land surface properties and the seasonality of exchanges of biosphere-atmosphere energy, water, and carbon. Accurate mechanistic modeling of phenological processes is therefore critical to understand and correctly predict terrestrial ecosystem feedbacks with changing atmospheric and climate conditions. However, the phenological components in the land model of the US Department of Energy's (DOE) Energy Exascale Earth System Model (ELM of E3SM) were previously unable to accurately capture the observed phenological responses to environmental conditions in a well-studied boreal peatland forest. In this research, we introduced new seasonal-deciduous phenology schemes into version 1.0 of ELM and evaluated their performance against the PhenoCam observations at the Spruce and Peatland Responses Under Changing Environments (SPRUCE) experiment in northern Minnesota from 2015 to 2018. We found that phenology simulated by the revised ELM (i.e., earlier spring onsets and stronger warming responses of spring onsets and autumn senescence) was closer to observations than simulations from the original algorithms for both the deciduous conifer (Larix laricina) and mixed shrub layers. Moreover, the revised ELM generally produced higher carbon and water fluxes (e.g., photosynthesis and evapotranspiration) during the growing season and stronger flux responses to warming than the default ELM. A parameter sensitivity analysis further indicated the significant contribution of phenology parameters to uncertainty in key carbon and water cycle variables, underscoring the importance of precise phenology parameterization. Furthermore, this phenological modeling effort demonstrates the potential to enhance the E3SM representation of land-climate interactions at broader spatiotemporal scales, especially under anticipated elevated CO 2 and warming conditions.

54 ENVIRONMENTAL SCIENCES↗

Probing the exact form and doping preference of magnesium in ordinary Portland cement clinker phases: A study from experiments and DFT simulations

Highlights: • The doping behaviors of Mg in OPC clinker phases were systematically studied. • About 1.3 wt% MgO enter OPC clinker phases by forming substitutional solid solutions. • In the 4 composed minerals, C{sub 3}S, C{sub 3}A and C{sub 4}AF can host more Mg ions than C{sub 2}S. • Mg ions prefer to replace Ca in C{sub 3}S, C{sub 2}S and C{sub 3}A while replace Fe and Ca in C{sub 4}AF. • Both the large structure distortions and formation energies governs the low solubility. A systematic study was performed to learn the exact existence form and doping behaviors of magnesium in ordinary Portland cement (OPC) clinker. Our results show that about 1.3 wt% MgO incorporates into OPC clinker phases by forming substitutional solid solutions while excess Mg accumulate and exist as periclase. Results from Rietveld refinement present a substitution preference in C{sub 3}S and C{sub 3}A over C{sub 2}S. More in-depth analyses from density function theoretical simulations show that in C{sub 3}S, C{sub 2}S and C{sub 3}A, the substitution occurs by replacing Ca while in C{sub 4}AF, it probably occurs by substituting Fe and Ca ions. The large structure distortions and sharp increase in formation energies with increasing MgO determines its low solubility. This work provides a clear understanding of the existence states and the intrinsic mechanism governing doping behaviors of Mg, thus should be very important in guiding the synthesis of OPC clinker by utilizing high-Mg limestone.

36 MATERIALS SCIENCE↗

A 10-Gb/s Driver/Receiver ASIC and Optical Modules for Particle Physics Experiments

We present the design and test results of a Drivers and Limiting AmplifierS ASIC operating at 10 Gbps (DLAS10) and three Miniature Optical Transmitter/Receiver/Transceiver modules (MTx+, MRx+, and MTRx+) based on DLAS10. DLAS10 can drive two Transmitter Optical Sub-Assemblies (TOSAs) of Vertical Cavity Surface Emitting Lasers (VCSELs), receive the signals from two Receiver Optical Sub-Assemblies (ROSAs) that have no embedded limiting amplifiers, or drive a VCSEL TOSA and receive the signal from a ROSA, respectively. Each channel of DLAS10 consists of an input Continuous Time Linear Equalizer (CTLE), a four-stage limiting amplifier (LA), and an output driver. The LA amplifies the signals of variable levels to a stable swing. The output driver drives VCSELs or impedance-controlled traces. DLAS10 is fabricated in a 65 nm CMOS technology. The die is 1 mm x 1 mm. DLAS10 is packaged in a 4 mm x 4 mm 24-pin quad-flat no-leads (QFN) package. DLAS10 has been tested in MTx+, MRx+, and MTRx+ modules. Both measured optical and electrical eye diagrams pass the 10 Gbps eye mask test. Furthermore, the input electrical sensitivity is 40 mVp-p, while the input optical sensitivity is -12 dBm. The total jitter of MRx+ is 29 ps (P-P) with a random jitter of 1.6 ps (RMS) and a deterministic jitter of 9.9 ps. Each MTx+/MTRx+ module consumes 82 mW/ch and 174 mW/ch, respectively.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Deciphering Interfacial Chemical and Electrochemical Reactions of Sulfide-Based All-Solid-State Batteries

Large interfacial resistance resulting from interfacial reactions is widely acknowledged as one of the main challenges in sulfide electrolytes (SEs)-based all-solid-state lithium batteries (ASSLBs). However, the root cause of the large interfacial resistance between the SEs and typical layered oxide cathodes is not fully understood yet. Here we deciphered that interfacial oxygen loss from single-crystal LiNi 0.5 Mn 0.3 Co 0.2 O 2 (SC-NMC532) chemically oxidizes Li 10 GeP 2 S 12 , generating oxygen-containing interfacial species. Meanwhile, the interfacial oxygen loss also induces a structural change of oxide cathodes (layered-to-rocksalt). Besides, the high operation voltage can electrochemically oxidize SEs to form non-oxygen species (e.g. polysulfides). These chemically and electrochemically oxidized species, together with the interfacial structural change, are responsible for the large interfacial resistance at the cathode interface. More importantly, the widely adopted interfacial coating strategy is effective in suppressing chemically oxidized oxygen-containing species and mitigating the coincident interfacial structural change but is unable to prevent electrochemically induced non-oxygen species. These findings provide a deeper insight into the large interfacial resistance between the typical SE and layered oxide cathodes, which may be of assistance for the rational interface design of SE-based ASSLBs in future.

25 ENERGY STORAGE↗

QTL × environment interactions underlie ionome divergence in switchgrass

Abstract Ionomics measures elemental concentrations in biological organisms and provides a snapshot of physiology under different conditions. In this study, we evaluate genetic variation of the ionome in outbred, perennial switchgrass in three environments across the species’ native range, and explore patterns of genotype-by-environment interactions. We grew 725 clonally replicated genotypes of a large full sib family from a four-way linkage mapping population, created from deeply diverged upland and lowland switchgrass ecotypes, at three common gardens. Concentrations of 18 mineral elements were determined in whole post-anthesis tillers using ion coupled plasma mass spectrometry (ICP-MS). These measurements were used to identify quantitative trait loci (QTL) with and without QTL-by-environment interactions (QTLxE) using a multi-environment QTL mapping approach. We found that element concentrations varied significantly both within and between switchgrass ecotypes, and GxE was present at both the trait and QTL level. Concentrations of 14 of the 18 elements were under some genetic control, and 77 QTL were detected for these elements. Seventy-four percent of QTL colocalized multiple elements, half of QTL exhibited significant QTLxE, and roughly equal numbers of QTL had significant differences in magnitude and sign of their effects across environments. The switchgrass ionome is under moderate genetic control and by loci with highly variable effects across environments.

59 BASIC BIOLOGICAL SCIENCES↗

Genomic mechanisms of climate adaptation in polyploid bioenergy switchgrass

Long-term climate change and periodic environmental extremes threaten food and fuel security and global crop productivity. Although molecular and adaptive breeding strategies can buffer the effects of climatic stress and improve crop resilience, these approaches require sufficient knowledge of the genes that underlie productivity and adaptation—knowledge that has been limited to a small number of well-studied model systems. Here we present the assembly and annotation of the large and complex genome of the polyploid bioenergy crop switchgrass ( Panicum virgatum ). Analysis of biomass and survival among 732 resequenced genotypes, which were grown across 10 common gardens that span 1,800 km of latitude, jointly revealed extensive genomic evidence of climate adaptation. Climate–gene–biomass associations were abundant but varied considerably among deeply diverged gene pools. Furthermore, we found that gene flow accelerated climate adaptation during the postglacial colonization of northern habitats through introgression of alleles from a pre-adapted northern gene pool. The polyploid nature of switchgrass also enhanced adaptive potential through the fractionation of gene function, as there was an increased level of heritable genetic diversity on the nondominant subgenome. In addition to investigating patterns of climate adaptation, the genome resources and gene–trait associations developed here provide breeders with the necessary tools to increase switchgrass yield for the sustainable production of bioenergy.

09 BIOMASS FUELS↗

A Low-Power Time-to-Digital Converter for the CMS Endcap Timing Layer (ETL) Upgrade

We present the design and test results of a Time-to-Digital-Converter (TDC). The TDC will be a part of the readout ASIC, called ETROC, to read out Low-Gain Avalanche Detectors (LGADs) for the CMS Endcap Timing Layer (ETL) of High-Luminosity LHC upgrade. One of the challenges of the ETROC design is that the TDC is required to consume less than 200 W for each pixel at the nominal hit occupancy of 1%. To meet the low-power requirement, we use a single delay line for both the Time of Arrival (TOA) and the Time over Threshold (TOT) measurements without delay control. A double-strobe self-calibration scheme is used to compensate for process variation, temperature, and power supply voltage. The TDC is fabricated in a 65 nm CMOS technology. The overall performances of the TDC have been evaluated. The TOA has a bin size of 17.8 ps within its effective dynamic range of 11.6 ns. The effective measurement precision of the TOA is 5.6 ps and 9.9 ps with and without the nonlinearity correction, respectively. The TDC block consumes 97 W at the hit occupancy of 1%. Over a temperature range from 23 C to 78 C and a power supply voltage range from 1.05 V to 1.35 V (the nominal value of 1.20 V), the self-calibrated bin size of the TOA varies within 0.4%. The measured TDC performances meet the requirements except that more tests will be performed in the future to verify that the TDC complies with the radiation-tolerance specifications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A 20 Gbps Data Transmitting ASIC with PAM4 for Particle Physics Experiments

We present the design principle and test results of a data transmitting ASIC, GBS20, for particle physics experiments. The goal of GBS20 will be an ASIC that employs two serializers each from the 10.24 Gbps lpGBT SerDes, sharing the PLL also from lpGBT. A PAM4 encoder plus a VCSEL driver will be implemented in the same die to use the same clock system, eliminating the need of CDRs in the PAM4 encoder. This way the transmitter module, GBT20, developed using the GBS20 ASIC, will have the exact lpGBT data interface and transmission protocol, with an output up to 20.48 Gbps over one fiber. With PAM4 embedded FPGAs at the receiving end, GBT20 will halve the fibers needed in a system and better use the input bandwidth of the FPGA. A prototype, GBS20v0 is fabricated using a commercial 65 nm CMOS technology. This prototype has two serializers and a PAM4 encoder sharing the lpGBT PLL, but no user data input. An internal PRBS generator provides data to the serializers. GBS20v0 is tested barely up to 20.48 Gbps. With lessons learned from this prototype, we are designing the second prototype, GBS20v1, that will have 16 user data input channels each at 1.28 Gbps. We present the design concept of the GBS20 ASIC and the GBT20 module, the preliminary test results, and lessons learned from GBS20v0 and the design of GBS20v1 which will be not only a test chip but also a user chip with 16 input data channels.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗