Engineering Papers⌕ Search

Engineering topics

Zhang, Jun

Publications and source records attributed to Zhang, Jun.

At least 163 records · Page 9

FLIP-FLOP ACTIVITY ON THE W UMa-TYPE BINARY SYSTEM HH UMa

We report the discovery of flip-flop activity in a W UMa-type binary. A long-term multi-color photometric surveillance of HH UMa was carried out with three sets of light curves obtained over six weeks. The light curves of the eclipsing binary presented marked asymmetry and rapid interchange between the two light maxima. During the observations from 2014 February to 2014 April, the spot distortion phase jumped between phases 0.25 and 0.75 twice, a typical indication of flip-flop activity. We applied the Wilson–Devinney method to analyze the three light curves. The results indicate that HH UMa is a partially eclipsing contact system of A subtype with an obviously asymmetric light curve. The observed light curves can be modeled by assuming that there are two dark spots on the massive primary component that are almost persistently located around phases 0.25 and 0.75, but can interchange their intensities. We further suggest that a plausible scenario for explaining the properties of those dark spots is strong surface magnetic activity with a sudden reversal of the more active longitude. We therefore conclude that HH UMa is very likely a W UMa-type system displaying flip-flop activity.

79 ASTRONOMY AND ASTROPHYSICS↗

DARK RIBBONS PROPAGATING AND SWEEPING ACROSS EXTREME ULTRAVIOLET STRUCTURES AFTER FILAMENT ERUPTIONS

With observations from the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory, we first report that dark ribbons (DRs) moved apart from the filament channel and swept across EUV structures after filament eruptions on 2013 June 23 and 2012 February 10 and 24, respectively. In the first event, the DR with a length of 168 Mm appeared at 100 Mm to the northwest of the filament channel, where the filament erupted 15 hr previously. The DR moved toward the northwest with the different sections having different velocities, ranging from 0.3 to 1.6 km s{sup −1}. When the DR’s middle part swept across a strong EUV structure, the motion of this part was blocked, appearing to deflect the DR. With the DR propagation, the connection of the surrounding EUV structures gradually changed. After one day passed, the DR eventually disappeared. In the other two events, the dynamic evolution of the DRs was similar to that in the first event. Based on the observations, we speculate that the reconnection during the filament eruption changes the configuration of the surrounding magnetic fields systematically. During the reconnection process, magnetic fields are deflecting and the former arbitrarily distributed magnetic fields are rearranged along specific directions. The deflection of magnetic fields results in an instantaneous void region where the magnetic strength is smaller and the plasma density is lower. Consequently, the void region is observed as a DR and propagates outward with the reconnection developing.

79 ASTRONOMY AND ASTROPHYSICS↗

One-pot solvothermal synthesis of ZnFe{sub 2}O{sub 4} nanospheres/graphene composites with improved lithium-storage performance

Highlights: • A one-pot solvothermal route is developed for synthesizing ZnFe{sub 2}O{sub 4}/graphene nanocomposites. • ZnFe{sub 2}O{sub 4} nanospheres with a size of about 100–200 nm are uniformly dispersed on graphene nanosheets. • The nanocomposite delivers a reversible capacity of 704 mAh/g after 50 cycles. • The improved lithium-storage performance is ascribed to the confining and conducting effects of graphene nanosheets. - Abstract: We report a facile one-pot solvothermal route for synthesizing ZnFe{sub 2}O{sub 4}/graphene nanocomposites. XRD, SEM and TEM results demonstrate that ZnFe{sub 2}O{sub 4} nanospheres with a size of about 100–200 nm are uniformly dispersed on graphene nanosheets. Each ZnFe{sub 2}O{sub 4} nanosphere is assembled by many nanoparticles around 10 nm. When evaluated as anode for Li-ion batteries, ZnFe{sub 2}O{sub 4}/graphene nanocomposites deliver a first discharge capacity of 1400 mAh g{sup −1} and remain a reversible capacity up to 704.2 mAh g{sup −1} after 50 cycles. ZnFe{sub 2}O{sub 4}/graphene nanocomposites also exhibit ameliorative rate capacity of 271.8 mAh g{sup −1} at the current of 800 mA g{sup −1}, which can recover to 814 mAh g{sup −1} when the current density is reduced back to 100 mA g{sup −1}. The enhanced electrochemical performances of the nanocomposites are ascribed to the confining and conducting effects of graphene and the synergistic effects between the conductive graphene and ZnFe{sub 2}O{sub 4} nanospheres.

36 MATERIALS SCIENCE↗

GREAT3 results - I. Systematic errors in shear estimation and the impact of real galaxy morphology

The study present first results from the third GRavitational lEnsing Accuracy Testing (GREAT3) challenge, the third in a sequence of challenges for testing methods of inferring weak gravitational lensing shear distortions from simulated galaxy images. GREAT3 was divided into experiments to test three specific questions, and included simulated space- and ground-based data with constant or cosmologically varying shear fields. The simplest (control) experiment included parametric galaxies with a realistic distribution of signal-to-noise, size, and ellipticity, and a complex point spread function (PSF). The other experiments tested the additional impact of realistic galaxy morphology, multiple exposure imaging, and the uncertainty about a spatially varying PSF; the last two questions will be explored in Paper II. The 24 participating teams competed to estimate lensing shears to within systematic error tolerances for upcoming Stage-IV dark energy surveys, making 1525 submissions overall. GREAT3 saw considerable variety and innovation in the types of methods applied. Several teams now meet or exceed the targets in many of the tests conducted (to within the statistical errors). We conclude that the presence of realistic galaxy morphology in simulations changes shear calibration biases by ~1 per cent for a wide range of methods. Other effects such as truncation biases due to finite galaxy postage stamps, and the impact of galaxy type as measured by the Sérsic index, are quantified for the first time. Our results generalize previous studies regarding sensitivities to galaxy size and signal-to-noise, and to PSF properties such as seeing and defocus. Almost all methods’ results support the simple model in which additive shear biases depend linearly on PSF ellipticity.

79 ASTRONOMY AND ASTROPHYSICS↗

OSCILLATING LIGHT WALL ABOVE A SUNSPOT LIGHT BRIDGE

With the high tempo-spatial Interface Region Imaging Spectrograph 1330 Å images, we find that many bright structures are rooted in the light bridge of NOAA 12192, forming a light wall. The light wall is brighter than the surrounding areas, and the wall top is much brighter than the wall body. The New Vacuum Solar Telescope Hα and the Solar Dynamics Observatory 171 and 131 Å images are also used to study the light-wall properties. In 1330, 171, and 131 Å, the top of the wall has a higher emission, while in the Hα line, the wall-top emission is very low. The wall body corresponds to bright areas in 1330 Å and dark areas in the other lines. The top of the light wall moves upward and downward successively, performing oscillations in height. The deprojected mean height, amplitude, oscillation velocity, and the dominant period are determined to be 3.6 Mm, 0.9 Mm, 15.4 km s{sup −1}, and 3.9 minutes, respectively. We interpret the oscillations of the light wall as the leakage of p-modes from below the photosphere. The constant brightness enhancement of the wall top implies the existence of some kind of atmospheric heating, e.g., via the persistent small-scale reconnection or the magneto-acoustic waves. In another series of 1330 Å images, we find that the wall top in the upward motion phase is significantly brighter than in the downward phase. This kind of oscillation may be powered by the energy released due to intermittent impulsive magnetic reconnection.

79 ASTRONOMY AND ASTROPHYSICS↗

QUASI-PERIODIC SLIPPING MAGNETIC RECONNECTION DURING AN X-CLASS SOLAR FLARE OBSERVED BY THE SOLAR DYNAMICS OBSERVATORY AND INTERFACE REGION IMAGING SPECTROGRAPH

We first report the quasi-periodic slipping motion of flare loops during an eruptive X-class flare on 2014 September 10. The slipping motion was investigated at a specific location along one of the two ribbons and can be observed throughout the impulsive phase of the flare. The apparent slipping velocity was 20–110 km s{sup −1}, and the associated period was 3–6 minutes. The footpoints of flare loops appeared as small-scale bright knots observed in 1400 Å, corresponding to fine structures of the flare ribbon. These bright knots were observed to move along the southern part of the longer ribbon and also exhibited a quasi-periodic pattern. The Si iv 1402.77 Å line was redshifted by 30–50 km s{sup −1} at the locations of moving knots with a ∼40–60 km s{sup −1} line width, larger than other sites of the flare ribbon. We suggest that the quasi-periodic slipping reconnection is involved in this process and the redshift at the bright knots is probably indicative of reconnection downflow. The emission line of Si iv at the northern part of the longer ribbon also exhibited obvious redshifts of about 10–70 km s{sup −1} in the impulsive phase of the flare, with the redshifts at the outer edges of the ribbon larger than those in the middle. The redshift velocities at post-flare loops reached about 80–100 km s{sup −1} in the transition region.

79 ASTRONOMY AND ASTROPHYSICS↗

Elucidation of Two Giants: Challenges to Thick-shell Synthesis in CdSe/ZnSe and ZnSe/CdS Core/Shell Quantum Dots

Core/thick-shell "giant" quantum dots (gQDs) possessing type II electronic structures exhibit suppressed blinking and diminished nonradiative Auger recombination. Here we investigate CdSe/ZnSe and ZnSe/CdS as potential new gQDs. We show theoretically and experimentally that both can exhibit partial or complete spatial separation of an excited-state electron–hole pair (i.e., type II behavior). However, we reveal that thick-shell growth is challenged by competing processes: alloying and cation exchange. We demonstrate that these can be largely avoided by choice of shelling conditions (e.g., time, temperature, and QD core identity). The resulting CdSe/ZnSe gQDs exhibit unusual single-QD properties, principally emitting from dim gray states but having high two-exciton (biexciton) emission efficiencies, whereas ZnSe/CdS gQDs show characteristic gQD blinking suppression, though only if shelling is accompanied by partial cation exchange.

36 MATERIALS SCIENCE↗

Preliminary investigation of an improved metal-dielectric cathode for magnetically insulated transmission line oscillator

In order to explore the cathode with good repetition quality for the magnetically insulated transmission line oscillators, an improved metal-dielectric cathode is proposed and investigated experimentally. The cathode is designed to be step-like shape, and thin copper plated boards are periodically and compactly arrayed on the surface of the cathode base, which ensures the uniformity of the electrons emitted from the cusps of the copper plated boards. According to the numerical simulation results, the step-like shape is beneficial to convert the kinetic energy of the magnetic insulating current partially and enhance the beam-wave interaction efficiency. Finally, a preliminary experiment of an L-band magnetically insulated transmission line oscillator (MILO) with the improved metal-dielectric cathode is carried out. A high power microwave (HPM) with an average power of 1.95 GW is generated from the MILO, with an efficiency of 13.5%. Under the same experiment condition, the output power and main frequency with the presented cathode are almost the same to those with the velvet cathode. Apart from that, metal-dielectric cathode has the merits of small outgassing and long lifetime, and all of these make the improved metal-dielectric cathode significantly promising for the MILO repetition operation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

CORONAL HEATING BY THE INTERACTION BETWEEN EMERGING ACTIVE REGIONS AND THE QUIET SUN OBSERVED BY THE SOLAR DYNAMICS OBSERVATORY

The question of what heats the solar corona remains one of the most important puzzles in solar physics and astrophysics. Here we report Solar Dynamics Observatory Atmospheric Imaging Assembly observations of coronal heating by the interaction between emerging active regions (EARs) and the surrounding quiet Sun (QS). The EARs continuously interact with the surrounding QS, resulting in dark ribbons which appear at the boundary of the EARs and the QS. The dark ribbons visible in extreme-ultraviolet wavelengths propagate away from the EARs with speeds of a few km s{sup −1}. The regions swept by the dark ribbons are brightening afterward, with the mean temperature increasing by one quarter. The observational findings demonstrate that uninterrupted magnetic reconnection between EARs and the QS occurs. When the EARs develop, the reconnection continues. The dark ribbons may be the track of the interface between the reconnected magnetic fields and the undisturbed QS’s fields. The propagating speed of the dark ribbons reflects the reconnection rate and is consistent with our numerical simulation. A long-term coronal heating which occurs in turn from nearby the EARs to far away from the EARs is proposed.

79 ASTRONOMY AND ASTROPHYSICS↗

Evolution of Self-Assembled ZnTe Magic-Sized Nanoclusters

Three families of ZnTe magic-sized nanoclusters (MSNCs) were obtained exclusively using polytellurides as a tellurium precursor in a one-pot reaction by simply varying the reaction temperature and time only. Different ZnTe MSNCs exhibit different self-assembling or aggregation behavior, owing to their different structure, cluster size, and dipole-dipole interactions. The smallest family of ZnTe MSNCs (F323) does not reveal a crystalline structure and as a result assembles into lamellar triangle plates. Continuous heating of as synthesized ZnTe F323 assemblies resulted in the formation of ZnTe F398 MSNCs with wurzite structure and concomitant transformation into lamellar rectangle assemblies with the organization of nanoclusters along the < 002 > direction. Further annealing of ZnTe F398 assembled lamellar rectangles leads to full organization of MSNCs in all directions and formation of larger ZnTe F444 NCs that spontaneously form ultrathin nanowires following an oriented attachment mechanism. The key step in control over the size distribution of ZnTe ultrathin nanowires is, in fact, the growth mechanism of ZnTe F398 MSNCs; namely, the step growth mechanism enables formation of more uniform nanowires compared to those obtained by continuous growth mechanism. High yield of ZnTe nanowires is achieved as a result of the wurzite structure of F398 precursor. Transient absorption (TA) measurements show that all three families possess ultrafast dynamics of photogenerated electrons, despite their different crystalline structures.

Zhang, Jun↗

Accurate shear measurement with faint sources

For cosmic shear to become an accurate cosmological probe, systematic errors in the shear measurement method must be unambiguously identified and corrected for. Previous work of this series has demonstrated that cosmic shears can be measured accurately in Fourier space in the presence of background noise and finite pixel size, without assumptions on the morphologies of galaxy and PSF. The remaining major source of error is source Poisson noise, due to the finiteness of source photon number. This problem is particularly important for faint galaxies in space-based weak lensing measurements, and for ground-based images of short exposure times. In this work, we propose a simple and rigorous way of removing the shear bias from the source Poisson noise. Our noise treatment can be generalized for images made of multiple exposures through MultiDrizzle. This is demonstrated with the SDSS and COSMOS/ACS data. With a large ensemble of mock galaxy images of unrestricted morphologies, we show that our shear measurement method can achieve sub-percent level accuracy even for images of signal-to-noise ratio less than 5 in general, making it the most promising technique for cosmic shear measurement in the ongoing and upcoming large scale galaxy surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

MAGNETIC RECONNECTION BETWEEN SMALL-SCALE LOOPS OBSERVED WITH THE NEW VACUUM SOLAR TELESCOPE

Using the high tempo-spatial resolution Hα images observed with the New Vacuum Solar Telescope, we report solid observational evidence of magnetic reconnection between two sets of small-scale, anti-parallel loops with an X-shaped topology. The reconnection process contains two steps: a slow step with a duration of more than several tens of minutes, and a rapid step lasting for only about three minutes. During the slow reconnection, two sets of anti-parallel loops gradually reconnect, and new loops are formed and stacked together. During the rapid reconnection, the anti-parallel loops approach each other quickly, and then rapid reconnection takes place, resulting in the disappearance of the former loops. In the meantime, new loops are formed and separate. The region between the approaching loops is brightened, and the thickness and length of this region are determined to be about 420 km and 1.4 Mm, respectively. During the rapid reconnection process, obvious brightenings at the reconnection site and apparent material ejections outward along reconnected loops are observed. These observed signatures are consistent with predictions by reconnection models. We suggest that the successive slow reconnection changes the conditions around the reconnection site and triggers instabilities, thus leading to the rapid approach of the anti-parallel loops and resulting in the rapid reconnection.

79 ASTRONOMY AND ASTROPHYSICS↗

DIRECT OBSERVATIONS OF TETHER-CUTTING RECONNECTION DURING A MAJOR SOLAR EVENT FROM 2014 FEBRUARY 24 TO 25

Using multi-wavelength data from the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory, we investigated two successive solar flares, a C5.1 confined flare and an X4.9 ejective flare with a halo coronal mass ejection, in NOAA active region 11990 from 2014 February 24 to 25. Before the confined flare onset, EUV brightening beneath the filament was detected. As the flare began, a twisted helical flux rope (FR) wrapping around the filament moved upward and then stopped, and in the meantime an obvious X-ray source below it was observed. Prior to the ejective X4.9 flare, some pre-existing loop structures in the active region interacted with each other, which produced a brightening region beneath the filament. Meanwhile, a small flaring loop appeared below the interaction region and some new helical lines connecting the far ends of the loop structures were gradually formed and continually added into the former twisted FR. Then, due to the resulting imbalance between the magnetic pressure and tension, the new FR, together with the filament, erupted outward. Our observations coincide well with a tether-cutting model, suggesting that the two flares probably have the same triggering mechanism, i.e., tether-cutting reconnection. To our knowledge, this is the first direct observation of tether-cutting reconnection occurring between pre-existing loops in an active region. In the ejective flare case, the erupting filament exhibited an Ω-like kinked structure and underwent an exponential rise after a slow-rise phase, indicating that the kink instability might be also responsible for the eruption initiation.

79 ASTRONOMY AND ASTROPHYSICS↗

Quantum correlation cost of the weak measurement

Quantum correlation cost (QCC) characterizing how much quantum correlation is used in a weak-measurement process is presented based on the trace norm. It is shown that the QCC is related to the trace-norm-based quantum discord (TQD) by only a factor that is determined by the strength of the weak measurement, so it only catches partial quantumness of a quantum system compared with the TQD. We also find that the residual quantumness can be ‘extracted’ not only by the further von Neumann measurement, but also by a sequence of infinitesimal weak measurements. As an example, we demonstrate our outcomes by the Bell-diagonal state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Two critical issues in Langevin simulation of gas flows

A stochastic algorithm based on the Langevin equation has been recently proposed to simulate rarefied gas flows. Compared with the direct simulation Monte Carlo (DSMC) method, the Langevin method is more efficient in simulating small Knudsen number flows. While it is well-known that the cell sizes and time steps should be smaller than the mean free path and the mean collision time, respectively, in DSMC simulations, the Langevin equation uses a drift term and a diffusion term to describe molecule movements, so no direct molecular collisions have to be modeled. This enables the Langevin simulation to proceed with a much larger time step than that in the DSMC method. Two critical issues in Langevin simulation are addressed in this paper. The first issue is how to reproduce the transport properties as that described by kinetic theory. Transport coefficients predicted by Langevin equation are obtained by using Green-Kubo formulae. The second issue is numerical scheme with boundary conditions. We present two schemes corresponding to small time step and large time step, respectively. For small time step, the scheme is similar to DSMC method as the update of positions and velocities are uncoupled; for large time step, we present an analytical solution of the hitting time, which is the crucial factor for accurate simulation. Velocity-Couette flow, thermal-Couette flow, Rayleigh-Bénard flow and wall-confined problem are simulated by using these two schemes. Our study shows that Langevin simulation is a promising tool to investigate small Knudsen number flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗