Engineering topics
Zhang, Jianzhong
Publications and source records attributed to Zhang, Jianzhong.
Microstructure characterization and elastic-plastic self-consistent simulation studies of anisotropic deformation of β -tin
Uniaxial compression tests of 99.9% pure polycrystalline $β$-tin (Sn) were conducted at various strain rates (10 -3 /s, 10 -1 /s and 1/s) and temperatures (294 K and 193 K) to understand the effects of these variables on the stress–strain response, microstructure evolution, and stress relaxation behavior. Multiple Sn specimens were subjected to complex compressive loading/unloading/reloading paths at different strain rates. Specimens initially compressed at higher strain rates showed strain rate-dependent texture evolution and more pronounced relaxation upon reloading, as compared to those pre-strained at lower rates at room temperature (RT). Compression tests conducted at low temperature (193 K) revealed increased strength, similar to the enhanced strength observed when the strain rate was increased at RT. Neutron diffraction was employed to characterize the initial and final bulk textures of the RT specimens. Electron backscatter diffraction was utilized to examine the crystallographic grain orientation and morphology, thereby identifying the signatures of dislocation-mediated deformation, grain refinement, recrystallization, and twinning behaviors. Elastic-plastic self-consistent simulations were performed to investigate the deformation modes responsible for the strain rate-dependent macroscopic stress–strain response and texture evolution. Effects of crystallographic orientation on stress relaxation behavior was also examined. In conclusion, the model predictions are in reasonable agreement with experimental observations.
A Coupled Small and Wide-Angle X-Ray Scattering Study of Phase Transformation Mechanisms in U-6Wt Pct Nb
The elevated temperature phase transformation kinetics of U-6wt%Nb in both wrought and cast conditions were investigated using in-situ high energy synchrotron X-ray scattering. The evolution of the phase content, γ-phase composition, and microstructure morphology was determined through the analysis of simultaneously collected wide-angle diffraction and small-angle scattering (SAXS) data. The results of the wide-angle scattering analysis, especially the phase fractions and average composition of the γ-phase, provide model parameters to enable a quantitative analysis using the SAXS data. Greater clarity regarding the kinetics of different precipitation mechanisms, namely the continuous precipitation (CP) of α-U within the γ-phase matrix and the discontinuous (DP) grain boundary precipitation of a lamellar microstructure, consisting of α-U and Nb-rich γ-phase are obtained from the coupled measurement modes. These results indicate that the CP mechanism is responsible for the initial precipitation of α-U at all temperatures considered. Near the nose in the time-temperature-transformation (TTT) diagram at ~798 K, both mechanisms are active during the early stages of phase transformation. However, the DP mechanism has an increasingly long incubation period with decreasing temperature below the TTT nose. In conclusion, the average interlamellar spacing obtained from the SAXS analysis increases with time, providing further evidence of the so-called divergent DP behavior previously observed in U-6wt%Nb alloys.
Time-resolved phase and compositional homogenization of segregated uranium-niobium alloys above the monotectoid temperature
Not Available
Compressibility and thermoelasticity of CrN
Explore the source record for details and available documents.
Crystal Structure Evolution of UCl 3 from Room Temperature to Melting
We report uranium trichloride (UCl 3 ) is actively researched to develop and improve applications ranging from molten salt reactors to actinide processing, including spent fuel reprocessing. Here, we report for the first time the crystal structure evolution between room temperature and melting point from in situ high-temperature neutron diffraction to quantify, for example, the thermal expansion of the hexagonal a and c lattice parameters. The results are compared with density functional theory calculations. The melting point of UCl 3 is determined by differential scanning calorimetry to be 1108.2 ± 0.2 K.
Towards a better understanding of phase transformations in uranium alloys
In-situ Synchrotron X-ray Scattering to Determine the TTT Diagram of U-6Nb
In-situ Synchrotron X-ray Scattering to Determine the TTT Diagram of U-6Nb
Explore the source record for details and available documents.
The lattice parameter – composition relationship of the body centered cubic uranium-niobium alloys
In this paper, in-situ time-of-flight neutron diffraction experiments were performed on uranium-niobium alloy with 6 wt% Nb to study the lattice parameter-composition relationship for the body centered cubic (bcc) alloys. Based on lattice-parameter measurements of Nb-supersaturated γs phase over the range of 450 – 790 °C, an improved Vegard's-type relationship was established for determination of Nb concentrations at elevated temperatures. Neutron diffraction data were also collected as a function of aging time over the 450 - 600 °C range when γs phase decomposed isothermally into the mixture of orthorhombic α-U and Nb-rich bcc phase, as well as at room-temperature on the alloys aged ex-situ at 500 °C up to five years. From these measurements, the average Nb concentrations in the bcc phase were determined based on the Rietveld refinements of weight fraction and mass conservation relations (lever rule). Over the 15at% – 78at% range of Nb concentrations that correspond to different experimental aging times, the lattice parameters at constant temperatures exhibit a nonlinear S-shaped variation with Nb concentration, and the associated excess volumes of mixing can be described by a subregular solution model of the Redlich–Kister type of polynomial. Over the full range of composition the S-shaped deviation from Vegard's law can be modeled using a combination of an elastic continuum model and a perturbation to the radii of the solute atoms in the solvent, suggesting that electronic interactions between solute and solvent atoms could play an important role in the compositional dependence of lattice parameter for the γ-phase U-Nb alloys. While Vegard's law is a straightforward and reasonably good approximation for the bcc solid solutions in the U-Nb system, the Nb concentrations determined from the weight fraction refinements of diffraction data provide internally consistent, mass-conserving estimates of solute redistribution for the monotectoid reaction.
Structural disorder, sublattice melting, and thermo-elastic properties of anti-perovskite Li 3 OBr under high pressure and temperature
Here, in situ synchrotron x-ray diffraction experiments were conducted in the system Li-O-Br at pressures up to 6.5 GPa and temperatures up to the melting points. The thermal equation of state determined from the P–V–T measurements indicates that crystalline anti-perovskite Li 3 OBr exhibits similar thermo-elastic properties to common salts. At temperatures that are 50–75 °C below the crystal melting, a pre-melting behavior was inferred based on weakened Bragg intensity and a substantial increase in the diffuse scattering. Concurrent with the onset of pre-melting, an anomalous increase in the lattice volume was observed and is interpreted as anion sublattice disorder. These findings support previous ab initio molecular dynamics simulations based on a simple anion interchange mechanism, indicating that structural disorder below crystal melting temperature can be a main driving force for Li-sublattice melting and superionic transition in the Li 3 OBr anti-perovskite.