Engineering Papers⌕ Search

Engineering topics

Zhang, J

Publications and source records attributed to Zhang, J.

At least 91 records · Page 5

The novel phase transition of NaBi(WO{sub 4}){sub 2} under high pressure

The Raman and synchrotron angle-dispersive X-ray diffraction studies have been performed on NaBi(WO{sub 4}){sub 2} under high pressure up to 30.7 and 36.2 GPa, respectively, at room temperature. With pressure increases to ∼7.0 GPa, the structure of NaBi(WO{sub 4}){sub 2} begins to transform from tetragonal (I4{sub 1}/a) into monoclinic (P2/m), and the phase transition completes around 13 GPa. With pressure higher than 29.0 GPa, the NaBi(WO{sub 4}){sub 2} turns into amorphous state. The random arrangement of Na{sup +} and Bi{sup 3+} in short-range ordered scheelite NaBi(WO{sub 4}){sub 2} results in the tetragonal to monoclinic phase transition, which is different from that observed in AWO{sub 4} tungstates and AMoO{sub 4} molybdates (A=Ca, Sr, Ba, Pb, Eu, Cd). - Graphical abstract: The NaBi(WO{sub 4}){sub 2} transforms from tetragonal into monoclinic, which starts around 7 GPa and completes at about 13 GPa. With pressure higher than 29 GPa, the NaBi(WO{sub 4}){sub 2} turns into amorphous state. Highlights: ► Raman and X-ray diffraction studies performed on NaBi(WO{sub 4}){sub 2} up to 30.7 and 36.2 GPa, respectively. ► The tetragonal (I4{sub 1}/a) into monoclinic (P2/m) phase transition is determined. ► With pressure higher than 29 GPa, the NaBi(WO{sub 4}){sub 2} ultimately turns into amorphous state. ► The ambient pressure bulk modulus and volume of tetragonal and monoclinic phases are obtained.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultra-bright XUV emission from laser wakefields in underdense plasma

By use of particle-in-cell (PIC) simulation, we observe ultra-bright XUV radiation pulses emerging from a laser wakefield driven above the wave-breaking threshold in underdense plasma, which is as short as a few hundred attoseconds in one-dimentsional simulations and a few femtoseconds in two-dimensional simulations. It is concerned with the formation of a transverse narrow current layer co-moving with the intense laser pulse. This current layer is formed by an electron density spike with trapped electrons in the wakefield with certain transverse kinetic momentum of electrons left behind the laser pulse. This net momentum appears when the driving laser pulse undergoes strong selfmodulation and subsequent pulse steepening at the front. In the multi-dimensional simulations, the XUV emission is found only near the laser axis with a much smaller spot size than the laser pulse due to the transverse dynamics of the trapped electrons. The present scheme provides an alternative method to produce ultra-bright XUV pulses for ultrafast applications.

07 ISOTOPE AND RADIATION SOURCES↗

Two-stage acceleration of protons from relativistic laser-solid interaction

A two-stage proton acceleration scheme using present-day intense lasers and a unique target design is proposed. The target system consists of a hollow cylinder, inside which is a hollow cone, which is followed by the main target with a flat front and dish-like flared rear surface. At the center of the latter is a tapered proton layer, which is surrounded by outer proton layers at an angle to it. In the first acceleration stage, protons in both layers are accelerated by target normal sheath acceleration. The center-layer protons are accelerated forward along the axis and the side protons are accelerated and focused towards them. As a result, the side-layer protons radially compress as well as axially further accelerate the front part of the accelerating center-layer protons in the second stage, which are also radially confined and guided by the field of the fast electrons surrounding them. Two-dimensional particle-incell simulation shows that a 79fs 8.5 Multiplication-Sign 10{sup 20} W/cm{sup 2} laser pulse can produce a proton bunch with {approx} 267MeV maximum energy and {approx} 9.5% energy spread, which may find many applications, including cancer therapy.

43 PARTICLE ACCELERATORS↗

Fabrication of Si surface pattern by Ar beam irradiation and annealing method

The fabrication process of crater structures on Si crystal has been studied by an irradiation of Ar beam and a thermal annealing at 600 Degree-Sign C. The fabricated surface was measured by field emission scanning electron microscope and atomic force microscope. The results have shown the controllability of specifications of crater formation such as density, diameter and depth by changing two irradiation parameters, fluence and energy of Ar ions. By changing the fluence over a range of 1 {approx} 10 Multiplication-Sign 10{sup 16}/cm{sup 2}, we could control a density of crater 0 {approx} 39 counts/100{mu}m{sup 2}. By changing the energy over a range of 90 {approx} 270 keV, we could control a diameter and a depth of crater in 0.8 {approx} 4.1{mu}m and 99 {approx} 229nm, respectively. The present result is consistent with the previously proposed model that the crater structure would be arising from an exfoliated surface layer of silicon. The present result has indicated the possibility of the crater production phenomena as a hopeful method to fabricate the surface pattern on a micro-nano meter scale.

36 MATERIALS SCIENCE↗

QUADRATURE OBSERVATIONS OF WAVE AND NON-WAVE COMPONENTS AND THEIR DECOUPLING IN AN EXTREME-ULTRAVIOLET WAVE EVENT

We report quadrature observations of an extreme-ultraviolet (EUV) wave event on 2011 January 27 obtained by the Extreme Ultraviolet Imager on board the Solar Terrestrial Relations Observatory, and the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory. Two components are revealed in the EUV wave event. A primary front is launched with an initial speed of {approx}440 km s{sup -1}. It appears that significant emission enhancement occurs in the hotter channel while deep emission reduction occurs in the cooler channel. When the primary front encounters a large coronal loop system and slows down, a secondary, much fainter, front emanates from the primary front with a relatively higher starting speed of {approx}550 km s{sup -1}. Afterward, the two fronts propagate independently with increasing separation. The primary front finally stops at a magnetic separatrix, while the secondary front travels farther until it fades out. In addition, upon the arrival of the secondary front, transverse oscillations of a prominence are triggered. We suggest that the two components are of different natures. The primary front belongs to a non-wave coronal mass ejection (CME) component, which can be reasonably explained with the field-line stretching model. The multi-temperature behavior may be caused by considerable heating due to nonlinear adiabatic compression on the CME frontal loop. As for the secondary front, it is most likely a linear fast-mode magnetohydrodynamic wave that propagates through a medium of the typical coronal temperature. X-ray and radio data provide us with complementary evidence in support of the above scenario.

79 ASTRONOMY AND ASTROPHYSICS↗

Collisional effects on the oblique instability in relativistic beam-plasma interactions

The general oblique instability for a relativistic electron beam propagating through a warm and resistive plasma is investigated fully kinetically by a variable rotation method. Analysis shows that the electrostatic part of the oblique instability is attenuated and eventually stabilized by collisional effects. However, the electromagnetic part of the oblique instability (EMOI) is enhanced. Since the current-filamentation instability as a special case of the EMOI has a larger growth rate, it becomes dominant in the collisional case as shown in our two-dimensional particle-in-cell simulations. While the beam diverges in the collisionless case, it can become magnetically collimated in the collisional case due to stabilization of the electrostatic instabilities when the initial beam spreading angle is less than certain magnitude such as a dozen degrees.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strong terahertz radiation from relativistic laser interaction with solid density plasmas

We report a plasma-based strong THz source generated in intense laser-solid interactions at relativistic intensities >10{sup 18} W/cm{sup 2}. Energies up to 50 {mu}J/sr per THz pulse is observed when the laser pulses are incident onto a copper foil at 67.5 Degree-Sign . The temporal properties of the THz radiation are measured by a single shot, electro-optic sampling method with a chirped laser pulse. The THz radiation is attributed to the self-organized transient fast electron currents formed along the target surface. Such a source allows potential applications in THz nonlinear physics and provides a diagnostic of transient currents generated in intense laser-solid interactions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗