Engineering Papers⌕ Search

Engineering topics

Zhang, J.

Publications and source records attributed to Zhang, J..

At least 163 records · Page 9

OECD RIA Benchmark Phase II - Towards a better understanding of the RIA fuel modelling

This paper deals with the second phase of the RIA (reactivity initiated accident) fuel rod code benchmark for water-cooled reactors that began in 2014. This second phase has been organized around 2 complementary activities: the first activity is to compare the results of different simulations on simplified cases in order to provide additional bases for understanding the differences in modelling of the concerned phenomena, while the second activity is focused on the assessment of the uncertainty of the results. The detailed specification and comparison of the results from the first activity is presented in this paper. Based on the Phase-I and Phase-II conclusions, some generic recommendations can be made. First, fuel and clad thermomechanical models (with the associated material properties) should be further improved and validated more extensively against a sound RIA database. Secondly, build-up of a comprehensive and robust database consisting of both separate-effect tests and integral tests should be pursued in the short term to reinforce the basis for assessment of both individual model and model integration into codes. Thirdly, an assessment of the uncertainty of fuel thermo-mechanics is of high interest (which is consistent with the second activity of this RIA benchmark Phase-II). Finally, as RIA fuel codes are more and more likely to be used for reactor accident studies, particularly for those involving safety analyses, the fuel rod failure criteria (generally used in such analyses) will have to be carefully justified and validated. The current RIA fuel failure criteria are mainly based on the fuel thermal variables and the verification is based on 'conservative' assumptions for the heat transfer conditions. As all codes give rather consistent evaluations of such variables, it appears possible, taking into account adequate provisions, to derive criteria based on thermal variables from experimental values or from an analytical approach. However, if in the future more mechanistic modelling is ever to be used to establish fuel-failure criteria based on mechanical variables, weaknesses in the validation of the codes identified above will have to be accounted for.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Optimized design of reactor cores for continuous operation of Belgian nuclear power plants

Two Belgian nuclear power plants, owned and operated by Electrabel, were initially planned to be phased out in 2015, reaching their maximum life time of operation by the initial design. The fuel management of those two units has been subsequently designed by Tractebel to make the best use of the energy in the fuel assemblies either in the core or in the storage pool and to minimize the size of the fresh reloads in the terminating cycles. However, for ensuring energy security in Belgium, the Government decided in the same year to extend the life time of operation of the two units for 10 years, which raised the need to resume their continuous operation, in the opposite direction of the core contents and with a significant break in the usual sequence of cycle reloads. All this required adaptation of the tools and process for optimized reactor core design, in order to ensure the continuous and flexible operation of those units. The Tractebel LWRWIMS-PANTHER (LWP) core physics package is based on the 3-dimensional (3D) neutronic code PANTHER and the lattice code LWRWIMS for the generation of the assembly nuclear data. Both have been qualified by Tractebel for the Belgian Units to perform a complete range of PWR reactor calculations for fuel management design safety parameters assessment, transient analysis and operational support. In-core fuel management involves calculating core reactivity, power distribution and isotopic inventory for subsequent fuel cycles of a nuclear power plant in order to maintain adequate safety margins and operating lifetime for each core loading. This paper presents Tractebel's improved core design tools and process, the approach to optimize the reactor core design, and the applications to the 2 successive but opposite design requirements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Long-term non-invasive interrogation of human dorsal root ganglion neuronal cultures on an integrated microfluidic multielectrode array platform

Scientific studies in drug development and toxicology rely heavily on animal models, which often inaccurately predict the true response for human exposure. This may lead to unanticipated adverse effects or misidentified risks that result in, for example, drug candidate elimination. The utilization of human cells and tissues for in vitro physiological platforms has become a growing area of interest to bridge this gap and to more accurately predict human responses to drugs and toxins. The effects of new drugs and toxins on the peripheral nervous system are often investigated with neurons isolated from dorsal root ganglia (DRG), typically with one-time measurement techniques such as patch clamping. Here, we report the use of our multi-electrode array (MEA) platform for long-term noninvasive assessment of human DRG cell health and function. In this study, we acquired simultaneous optical and electrophysiological measurements from primary human DRG neurons upon chemical stimulation repeatedly through day in vitro (DIV) 23. Distinct chemical signatures were noted for the cellular responses evoked by each chemical stimulus. Additionally, the cell viability and function of the human DRG neurons were consistent through DIV 23. To the best of our knowledge, this is the first report on long-term measurements of the cell health and function of human DRG neurons on a MEA platform. Future generations will include higher electrode numbers in customized arrangements as well as integration with different tissue types on a single device. This platform will provide a valuable testing tool for both rodent and human cells, enabling a more comprehensive risk assessment for drug candidates and toxicants.

59 BASIC BIOLOGICAL SCIENCES↗

TH-E-201-02: Hands-On Physics Teaching of Residents in Diagnostic Radiology

The ABR Core Examination stresses integrating physics into real-world clinical practice and, accordingly, has shifted its focus from passive recall of facts to active application of physics principles. Physics education of radiology residents poses a challenge. The traditional method of didactic lectures alone is insufficient, yet it is difficult to incorporate physics teaching consistently into clinical rotations due to time constraints. Faced with this challenge, diagnostic medical physicists who teach radiology residents, have been thinking about how to adapt their teaching to the new paradigm, what to teach and meet expectation of the radiology resident and the radiology residency program. The proposed lecture attempts to discuss above questions. Newly developed diagnostic radiology residents physics curriculum by the AAPM Imaging Physics Curricula Subcommittee will be reviewed. Initial experience on hands-on physics teaching will be discussed. Radiology resident who will have taken the BAR Core Examination will share the expectation of physics teaching from a resident perspective. The lecture will help develop robust educational approaches to prepare radiology residents for safer and more effective lifelong practice. Learning Objectives: Learn updated physics requirements for radiology residents Pursue effective approaches to teach physics to radiology residents Learn expectation of physics teaching from resident perspective J. Zhang, This topic is partially supported by RSNA Education Scholar Grant.

61 RADIATION PROTECTION AND DOSIMETRY↗

A statistical study of the average iron charge state distributions inside magnetic clouds for solar cycle 23

Magnetic clouds (MCs) are the interplanetary counterparts of coronal magnetic flux ropes. They can provide valuable information regarding flux rope characteristics at their eruption stage in the corona, which is unable to be explored in situ at present. In this paper, we make a comprehensive survey of the average iron charge-state (〈Q〉Fe) distributions inside 96 MCs for solar cycle 23 using Advanced Composition Explorer (ACE) data. Since the 〈Q〉Fe in the solar wind are typically around 9+ to 11+, the Fe charge state is defined as being high when the 〈Q〉Fe is larger than 12+, which implies the existence of a considerable amount of Fe ions with high charge states (e.g., ≥16+). The statistical results show that the 〈Q〉Fe distributions of 92 (∼96%) MCs can be classified into four groups with different characteristics. In group A (11 MCs), the 〈Q〉Fe shows a bi-modal distribution with both peaks being higher than 12+. Group B (4 MCs) presents a unimodal distribution of 〈Q〉Fe, with its peak being higher than 12+. In groups C (29 MCs) and D (48 MCs), the 〈Q〉Fe remains higher and lower than 12+ throughout ACE’s passage through the MC, respectively. Possible explanations of these distributions are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Continuous control of spin polarization using a magnetic field

The giant magnetoresistance (GMR) of a point contact between a Co/Cu multilayer and a superconductor tip varies for different bias voltage. Direct measurement of spin polarization by Andreev reflection spectroscopy reveals that the GMR change is due to a change in spin polarization. This work demonstrates that the GMR structure can be utilized as a spin source and that the spin polarization can be continuously controlled by using an external magnetic field.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Intrinsic beam emittance of laser-accelerated electrons measured by x-ray spectroscopic imaging

Here, the recent combination of ultra-intense lasers and laser-accelerated electron beams is enabling the development of a new generation of compact x-ray light sources, the coherence of which depends directly on electron beam emittance. Although the emittance of accelerated electron beams can be low, it can grow due to the effects of space charge during free-space propagation. Direct experimental measurement of this important property is complicated by micron-scale beam sizes, and the presence of intense fields at the location where space charge acts. Reported here is a novel, non-destructive, single-shot method that overcame this problem. It employed an intense laser probe pulse, and spectroscopic imaging of the inverse-Compton scattered x-rays, allowing measurement of an ultra-low value for the normalized transverse emittance, 0.15 (±0.06) π mm mrad, as well as study of its subsequent growth upon exiting the accelerator. The technique and results are critical for designing multi-stage laser-wakefield accelerators, and generating high-brightness, spatially coherent x-rays.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

National Cost-Effectiveness of ANSI/ASHRAE/IES Standard 90.1-2016

The purpose of this analysis is to examine the cost-effectiveness of the 2016 edition of ANSI/ASHRAE/IES Standard 90.1, which is developed by the ASHRAE Standard Standing Project Committee (SSPC) 90.1, and is the model energy standard for all commercial buildings and multifamily residential buildings over three floors. PNNL analyzed the cost-effectiveness of changes in Standard 90.1-2016, compared to the previous 90.1-2013 edition, as applied in commercial buildings across the United States.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Structure alterations in Al-Y-based metallic glasses with La and Ni addition

The atomic structures of Al{sub 89}Y{sub 11}, Al{sub 90}Y{sub 6.5}La{sub 3.5}, and Al{sub 82.8}Y{sub 6.07}Ni{sub 8}La{sub 3.13} metallic glasses have been studied by using high energy X-ray diffraction, X-ray absorption fine structure combined with the ab initio molecular dynamics and reverse Monte Carlo simulations. It is demonstrated that the partial replacement of Y atoms by La has limited improvement of the glass forming ability (GFA), although La atoms reduce the ordering around Y atoms and also the fractions of icosahedron-like polyhedra centered by Al atoms. In contrast, Ni atoms can significantly improve the GFA, which are inclined to locate in the shell of polyhedra centered by Al, Y, and La atoms, mainly forming Ni-centered icosahedron-like polyhedra to enhance the spatial connectivity between clusters and suppress the crystallization.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical investigation of shock interaction with one-dimensional transverse array of particles in air

In this paper, we present numerical simulations of shock propagation in air over a one-dimensional transverse array of particles. Simulations are carried out by varying the particle spacing and shock Mach number. We compute the unsteady inviscid drag coefficient as a function of time and make relevant comparisons to that for a single particle. We find that deviations in the drag coefficient in time from that of a single particle can be correlated to the acoustic-particle interaction time. Finally, we investigate and classify the interaction of the bow shocks in front of the transverse array of particles.

42 ENGINEERING↗

Dark matter search results from the PICO-60 CF 3 I bubble chamber

New data are reported from the operation of the PICO-60 dark matter detector, a bubble chamber filled with 36.8 kg of CF3I and located in the SNOLAB underground laboratory. PICO-60 is the largest bubble chamber to search for dark matter to date. With an analyzed exposure of 92.8 livedays, PICO-60 exhibits the same excellent background rejection observed in smaller bubble chambers. Alpha decays in PICO-60 exhibit frequency-dependent acoustic calorimetry, similar but not identical to that reported recently in a C3F8 bubble chamber. PICO-60 also observes a large population of unknown background events, exhibiting acoustic, spatial, and timing behaviors inconsistent with those expected from a dark matter signal. These behaviors allow for analysis cuts to remove all background events while retaining 48.2% of the exposure. Stringent limits on weakly interacting massive particles interacting via spin-dependent proton and spin-independent processes are set, and most interpretations of the DAMA/LIBRA modulation signal as dark matter interacting with iodine nuclei are ruled out.

PICO-60↗

Photometric and period investigation of the late F-type overcontact binary II UMa

II UMa is a late F-type (F5) contact binary with a close-in tertiary and a distant visual companion. According to the four-color (B V R{sub c}I{sub c}) light curves’ solutions of II UMa, it is a high fill-out (f = 86.6%) and low-mass ratio (q = 0.172) contact binary system, which indicates that it is at the late evolutionary stage of late-type tidal-locked binary stars. The masses of the primary star and secondary star are calculated to be M{sub 1}=1.99M{sub ⊙} and M{sub 2}=0.34M{sub ⊙}. The primary star has evolved from the zero-age main sequence, but it still appeared before the terminal-age main sequence, and the secondary star is even more evolved. Considering the mass ratio (M{sub 3}/M{sub 1}=0.67) obtained by spectroscopic observations, the mass of the close-in tertiary is estimated to be M{sub 3}=1.34M{sub ⊙}. The period variations of the binary system are investigated for the first time. According to the observed–calculated (O−C) curve analysis, a continuous period increase at a rate of dP/dt=4.88×10{sup −7} day yr{sup −1} is determined. The parabolic variation in the O−C curve may be part of a cyclic period of change, or the combined period of change of a parabolic variation and a cyclic one. More instances of minimum light are needed to confirm this. The presence of the tertiary component may play an important role in the formation and evolution of this binary system by drawing angular momentum from the central system during the pre-contact stage.

79 ASTRONOMY AND ASTROPHYSICS↗

New Results from the Search for Low-Mass Weakly Interacting Massive Particles with the CDMS low ionization Threshold Experiment

The CDMS low ionization threshold experiment (CDMSlite) uses cryogenic germanium detectors operated at a relatively high bias voltage to amplify the phonon signal in the search for weakly interacting massive particles (WIMPs). Results are presented from the second CDMSlite run with an exposure of 70 kg day, which reached an energy threshold for electron recoils as low as 56 eV. A fiducialization cut reduces backgrounds below those previously reported by CDMSlite.

New Results, Low-Mass, Mazzive Particles, CDMS Low↗

Shock interaction with deformable particles using a constrained interface reinitialization scheme

In this paper, we present axisymmetric numerical simulations of shock propagation in nitromethane over an aluminum particle for post-shock pressures up to 10 GPa. We use the Mie-Gruneisen equation of state to describe both the medium and the particle. The numerical method is a finite-volume based solver on a Cartesian grid, that allows for multi-material interfaces and shocks, and uses a novel constrained reinitialization scheme to precisely preserve particle mass and volume. We compute the unsteady inviscid drag coefficient as a function of time, and show that when normalized by post-shock conditions, the maximum drag coefficient decreases with increasing post-shock pressure. We also compute the mass-averaged particle pressure and show that the observed oscillations inside the particle are on the particle-acoustic time scale. Finally, we present simplified point-particle models that can be used for macroscale simulations. In the Appendix, we extend the isothermal or isentropic assumption concerning the point-force models to non-ideal equations of state, thus justifying their use for the current problem.

Sridharan, P. (ORCID:0000000287902423)↗