Engineering Papers⌕ Search

Engineering topics

Zhang, H.

Publications and source records attributed to Zhang, H..

At least 73 records · Page 4

Adding diffusion ordered NMR spectroscopy (DOSY) to the arsenal for characterizing paramagnetic complexes

Herein we report the development of diffusion ordered NMR spectroscopy (DOSY) for its use to characterize metal complexes containing paramagnetic first row transition metal elements. This technique is capable of assessing the purity and speciation of paramagnetic complexes, and also provides a convenient method to provide qualitative and sometimes quantitative molecular weight data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Latest Code Development Progress of JSPEC

The JLab Simulation Package on Electron Cooling (JSPEC) is an open source software developed at Jefferson Lab for electron cooling and intrabeam scattering (IBS) simulations. IBS is an important factor that leads to the growth of the beam emittance and hence the reduction of the luminosity in a high density ion collider ring. Electron cooling is an effective measure to overcome the IBS effect. Although JSPEC is initiated to fulfill the simulation needs in JLab Electron Ion Collider project, it can be used as a general design tool for other accelerators. JSPEC provides various models of the ion beam and the electron beam and it calculates the expansion rate and simulates the evolution of the ion beam under the IBS and/or electron cooling effect. In this report, we will give a brief introduction of JSPEC and then present the latest code development progress of JSPEC, including new models, algorithms, and the user interface.

Zhang, Y.↗

A C++ TPSA/DA Library with Python Wrapper

Truncated power series algebra (TPSA) or differential algebra (DA) is often used by accelerator physicists to generate a transfer map of a dynamic system. The map then can be used in dynamic analysis of the system or in particle tracking study. TPSA/DA can also be used in some fast algorithms, eg. the fast multipole method, for collective effect simulation. This paper reports a new TPSA/DA library written in C++. This library is developed based on Dr. Lingyun Yang?s TPSA code, which has been used in MAD-X and PTC. Compared with the original code, the updated version has the following changes: (1) The memory management has been revised to improve the efficiency; (2) A new data type of DA vector is defined and supported by most frequently used operators; (3) Support of inverse trigonometric functions and hyperbolic functions for the DA vector has been added; (4) function composition is revised for better efficiency; (5) a python wrapper is provided. The code is hosted at github and available to the public.

Zhang, Y.↗

NASA GES DISC Giovanni: Current and Future

Giovanni (Geospatial Interactive Online Visualization and Analysis Infrastructure), developed by the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC), has established a reputation among NASA users for easy access, analysis, and visualization of NASA Earth science data. Currently, Giovanni supports over 1900 variables in eight disciplinary areas. Like any other enterprise application, Giovanni faces big data challenges, such as servicing increasingly large data volumes and more complex data types, while at the same time addressing the demands of a more diverse user community, e.g., placing requests for long-term time series from multiple spatially and temporally dense data records. I will present how Giovanni has been evolving from an on-premises, monolithic software application towards a cloud-enabled implementation to address these challenges.

Analytics↗

Nature of the structural symmetries associated with hybrid improper ferroelectricity in C a 3 X 2 O 7 ( X = Mn and Ti )

In hybrid improper ferroelectric systems, polarization arises from the onset of successive nonpolar lattice modes. Here, measurements and modeling were performed to determine the spatial symmetries of the phases involved in the transitions to these modes. Structural and optical measurements reveal that the tilt and rotation distortions of the MnO 6 or TiO 6 polyhedra relative to the high symmetry phases driving ferroelectricity in the hybrid improper Ca 3 X 2 O 7 system (X = Mn and Ti) condense at different temperatures. The tilt angle vanishes abruptly at T T ~ 400 K for Ca 3 Mn 2 O 7 (and continuously for X = Ti ) and the rotation mode amplitude is suppressed at much higher temperatures T R ~ 1060 K. Moreover, Raman measurements in Ca 3 Mn 2 O 7 under isotropic pressure reveal that the polyhedral tilts can be suppressed by very low pressures (between 1.4 and 2.3 GPa) indicating their softness. These results suggest that the Ca 3 Mn 2 O 7 system provides a platform for strain engineering of ferroelectric properties in film-based systems with substrate-induced strain.

36 MATERIALS SCIENCE↗

Doppler broadening in Mg 20 ( β p γ ) Ne 19 decay

The $^{15}$$\textbf{O}$$\Big({α,γ}\Big)$$^{19}$$\textbf{Ne}$ bottleneck reaction in Type I x-ray bursts is the most important thermonuclear reaction rate to constrain experimentally, to improve the accuracy of burst light-curve simulations. A proposed technique to determine the thermonuclear rate of this reaction employs the $^{20}$$\textbf{Mg}$$\Big({βpα}\Big)$$^{15}$$\textbf{O}$ decay sequence. The key $^{15}$$\textbf{O}$$\Big({α,γ}\Big)$$^{19}$$\textbf{Ne}$ resonance at an excitation of 4.03 MeV is now known to be fed in $^{20}$$\textbf{Mg}$$\Big({βpγ}\Big)$$^{19}$$\textbf{Ne}$ however, the energies of the protons feeding the 4.03 MeV state are unknown. Knowledge of the proton energies will facilitate future $^{20}$$\textbf{Mg}$$\Big({βpα}\Big)$$^{15}$$\textbf{O}$ measurements. To determine the energy of the proton transition feeding the 4.03 MeV state in $^{19}$$\textbf{Ne}$. A fast beam of $^{20}$$\textbf{Mg}$ was implanted into a plastic scintillator, which was used to detect $β$ particles. 16 high purity germanium detectors were used to detect $γ$ rays emitted following $βp$ decay. A Monte Carlo method was used to simulate the Doppler broadening of $^{19}$$\textbf{Ne}γ$-ray lines and compare to the experimental data. The center of mass energy between the proton and $^{19}$$\textbf{Ne}$, feeding the 4.03 MeV state, is measured to be $1.21^{+0.25}_{-0.22}$ $\textbf{MeV}$, corresponding to a $^{20}$$\textbf{Na}$ excitation energy of $7.44^{+0.25}_{-0.22}$$\textbf{MeV}$. Absolute feeding intensities and $γ$-decay branching ratios of $^{19}$$\textbf{Ne}$ states were determined including the 1615 keV state, which has not been observed before in this decay. A new $γ$ decay branch from the 1536 keV state in $^{19}$$\textbf{Ne}$ to the ground state is reported. The lifetime of the 1507 keV state in $^{19}$$\textbf{Ne}$ is measured to be $4.3^{+1.3}_{-1.1}$ ps resolving discrepancies in the literature. Conflicting $^{20}$$\textbf{Mg}$$\Big({βp}\Big)$ decay schemes in published literature are clarified.The utility of this Doppler broadening technique to provide information on $β$-delayed nucleon emission and excited-state lifetimes has been further demonstrated. In particular, knowledge of the proton energies feeding the 4.03 MeV $^{19}$$\textbf{Ne}$ state in $^{20}$$\textbf{Mg}$ $β$ decay will facilitate future measurements of the $α$-particle branching ratio.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Synthesis of β-Cyclodextrin Immobilized Starch and Its Application for the Removal of Dyestuff from Waste-Water

A natural polymeric adsorbent, β-cyclodextrin immobilized starch (CS-βCD) was prepared by introducing host functional molecule β-cyclodextrin (β-CD) onto starch in presence of citric acid. The immobilization conditions were optimized to: m CA:m CS = 1:2, reaction time of 2 h and reaction temperature at 120 °C, by varying the input levels of the reactant, CS-βCD with a series of immobilization ratio (IR) and carboxyl content (CC) could be obtained. The FT-IR and {sup 13}C-NMR analysis indicated the β-CD molecules have been immobilized onto starch via the formation of ester linkages. The XRD and SEM analysis showed CS-βCD had more looser structure and more irregular surface compared with native starch. The GPC analysis showed CS-βCD had a reduced molecular weight but a more complicated molecular configuration. The adsorbing capacities of CS-βCD to three cationic dyes (methylene blue, methyl purple and basic fuchsin) were significantly improved compared with native starch, diatomite and zeolite. The adsorption behaviors of CS-βCD to the three dyes had high fitting degrees to both Langmuir and Freundlich models (R{sup 2} > 0.98). The decolourization ratio of CS-βCD to the mixed dyestuff waste-water had reached 88.75%, which was much higher than other absorbents. The results indicated the CS-βCD would become a high-efficiency dyestuff adsorbent, and would have a promising application in the industrial dyestuff waste-water treatment.

36 MATERIALS SCIENCE↗

Two mode coupling of the ablative Rayleigh-Taylor instabilities

In this work, the coupling and evolution of two-mode ablative Rayleigh-Taylor instability (ARTI) in two-dimensional geometry are studied via numerical simulations. We focus primarily on two scenarios: Coupling and bubble competition of a long and a short wavelength mode and of two short-wavelength modes. It is found that the long-wavelength modes tend to dominate in the nonlinear phase of the long-short coupling cases. The presence of the short-wavelength mode in the long-short cases enhances the total ARTI bubble vertex velocity. However, due to the formation of enclosed bubbles, this enhancement does not increase monotonically with the initial short-wavelength amplitude. Coupling of two short-wavelength modes forms a long-wavelength component which grows faster than each individual short-wavelength mode.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

PETSc Users Manual (Rev. 3.11)

This manual describes the use of PETSc for the numerical solution of partial differential equations and related problems on high-performance computers. The Portable, Extensible Toolkit for Scientific Computation (PETSc) is a suite of data structures and routines that provide the building blocks for the implementation of large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all message-passing communication.

97 MATHEMATICS AND COMPUTING↗

Measuring the elastic wave velocity in the lens of the eye as a function of intraocular pressure using optical coherent elastography

The dependence of the elastic properties of the eye lens on the intraocular pressure is investigated in porcine eyes ex vivo. To measure the stiffness of the lens, the method of dynamic optical coherent elastography is used, in which the propagation velocity of surface elastic waves in the lens is measured using phase-sensitive optical coherent tomography. Measurement data show an increase in Young’s modulus of the lens by ∼30% with an increase in intraocular pressure from 10 to 40 mm Hg. This result allows us to conclude that the effect of intraocular pressure on the rigidity of the lens is less significant than on the rigidity of other eye tissues, such as the cornea and sclera. The method of optical coherent elastography makes it possible to measure the elastic properties of the lens without removing it from the eyeball and has considerable potential for clinical use. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of Critical Current and n-Values of 2G HTS Tapes: Their Magnetic Field-Angular Dependence

Since many applications of YBCO tapes operate in external magnetic fields, it is necessary to investigate the magneto-angular dependence of critical current and n-values in coated conductors. In this paper, five commercial YBCO tapes with different microstructures produced by three different manufacturers are chosen. The selected samples have a width of 2.0, 4.0, 4.8, 6.0 or 12 mm, with copper, brass or stainless steel laminations. The critical current density dependence J{sub c}(B, θ) and n-values characteristics n(B, θ) of the tapes are comprehensively measured under various magnetic fields and orientations. Afterwards, the obtained experimental data sets are successfully fitted using a novel multi-objective model which considers the material anisotropy. By using this approach, a fitting function I{sub c}(B, θ) can always be obtained to accurately describe the experimental data, regardless of the fabrication and width differences of the superconducting tapes. Moreover, our experiment shows that when subject to different external magnetic fields, the angular dependence of n-values characteristics is directly correlated with the corresponding critical current profiles. Our results are helpful to predict the critical current of electromagnetically interacting 2G HTS wires, thereby improving the design and performance of the devices made from YBCO tapes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication and Study of Optical Properties of LEDs Based on GaN Micropyramids with a Ni/Au/Graphene Semi-Transparent Contact

The results of studies of technological conditions of formation of LEDs on the basis of an InGaN/GaN micropyramid in the core/shell geometry using a semi-transparent Ni/Au/graphene contact have been presented. The structures have been formed by the method of metalorganic vapor-phase epitaxy. The development of the tranfer conditions of large-area graphene obtained by chemical-vapor deposition has allowed the using of it as a contact for current injection. The fabricated LEDs have demonstrated electroluminescence at a wavelength of 520–540 nm. These sources of radiation are of interest for biomedical applications— in particular, for optogenetics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Active Quenching Technique for YBCO Tapes: Quench Acceleration and Protection

The application of resistive-type superconducting fault current limiters (RSFCLs) in electrical networks is very attractive due to their relative compactness, light weight, and good performance. However, this technology still has drawbacks: asymmetrical quench, uncertain limiting velocity, passive action and incapability of enlarging capacity. Here, we present an active quenching technique which can potentially solve these problems. The quenching process is triggered using high-frequency (HF) AC fields, which are generated by two coupled copper coils attached on both sides of the YBCO sample. Our experiments show that this approach is effective in guaranteeing uniform quench and therefore is expected to be able to significantly extend the service life of the device. Moreover, the quench speed can be considerably increased by the HF field. We find that the performance of acceleration is positively correlated to the transport current, intensity and frequency of the AC field. In addition, a DC magnetic field is added around the sample holder simultaneously with the AC field, to study the field-angular-frequency dependence of the quench time t(B{sub AC}f{sub AC}B{sub DC}𝜃{sub DC}). Experimental results prove that the DC magnetic field can cooperate with the HF AC field to accelerate quench, which means better performance can be produced with lower costs with the two fields acting together. In all, this technique showed outstanding performance regarding quench acceleration and tape protection. We believe the HF-assisted quenching technology has a promising future in current-limiting devices and hope our findings could be helpful for its potential applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗