Engineering Papers⌕ Search

Engineering topics

Zhang, Fei

Publications and source records attributed to Zhang, Fei.

At least 73 records · Page 4

Understanding Measurement Artifacts Causing Inherent Cation Gradients in Depth Profiles of Perovskite Photovoltaics with TOF-SIMS

Time-of-flight secondary-ion mass spectrometry (TOF-SIMS) is one of the few techniques that can obtain chemical information from the hybrid organic-inorganic perovskite solar cells (PSCs) in one dimension (standard depth profiling), two dimensions (high-resolution 100-nm imaging), as well as three dimensions (tomography combining high-resolution imaging with depth profiling). We have very recently developed thermo-mechanical methods to cleave perovskite samples at the back transparent conducting oxide/PSC interface. This allowed for depth-profiling from the back of the device to the front. The resultant profiles answered the lingering question of the apparent A-site cation gradient typically seen in TOF-SIMS depth profiles. In fact, this gradient is a measurement artifact due to beam damage that the community should be informed of as TOF-SIMS data become more commonly employed. Methods of mitigating this artifact by altering the measurement conditions are also presented.

14 SOLAR ENERGY↗

Individual Electron and Hole Mobilities in Lead-Halide Perovskites Revealed by Noncontact Methods

Charge carrier mobilities help determine semiconductor performance in optoelectronic applications, but measurement of the individual electron and hole mobilities usually involves indirect methods or probes with electrical contacts that are influenced by the quality of the interface or contact. Here, a noncontact method is introduced to distinguish the mobilities of electrons and holes by combining time-resolved terahertz spectroscopy (TRTS) and optical transient reflection (TR) spectroscopy. The validation of this method is first demonstrated on a semi-insulator GaAs wafer, and then, three lead-halide perovskite polycrystalline films with different cation mixtures are studied. We find that the hole mobility is significantly higher (~10x) than that of the electron mobility in all of the perovskite thin films studied. The highly alloyed triple cation polycrystalline film shows the highest mobility, longest bulk carrier lifetime, and lowest surface recombination velocity.

14 SOLAR ENERGY↗

Additive Engineering for Efficient and Stable Perovskite Solar Cells

Perovskite solar cells (PSCs) have reached a certified 25.2% efficiency in 2019 due to their high absorption coefficient, high carrier mobility, long diffusion length, and tunable direct bandgap. However, due to the nature of solution processing and rapid crystal growth of perovskite thin films, a variety of defects can form as a result of the precursor compositions and processing conditions. The use of additives can affect perovskite crystallization and film formation, defect passivation in the bulk and/or at the surface, as well as influence the interface tuning of structure and energetics. Here, recent progress in additive engineering during perovskite film formation is discussed according to the following common categories: Lewis acid (e.g., metal cations, fullerene derivatives), Lewis base based on the donor type (e.g., O-donor, S-donor, and N-donor), ammonium salts, low-dimensional perovskites, and ionic liquid. Various additive-assisted strategies for interface optimization are then summarized; additives include modifiers to improve electron- and hole-transport layers as well as those to modify perovskite surface properties. To conclude, an outlook is provided on research trends with respect to additive engineering in PSC development.

14 SOLAR ENERGY↗

Dark air–liquid interfacial chemistry of glyoxal and hydrogen peroxide

The air-liquid (a-l) interfacial chemistry of glyoxal is of great interest in atmospheric chemistry. We present molecular imaging of glyoxal and hydrogen peroxide (H 2 O 2 ) dark aging using in situ time-of-flight secondary ion mass spectrometry (ToF-SIMS). More organic peroxides and cluster ions are observed at the a-l interface in dark aging compared to UV aging. Cluster ions formed with more water molecules in dark aging indicate that aqueous secondary organic aerosols (aqSOA) could form hydrogen bond with water molecules, suggesting that aqSOA at the aqueous phase are more hydrophilic. Thus the interfacial aqSOA in dark aging could increase hygroscopic growth. Strong contribution of cluster ions and large water clusters in dark aging indicates change of solvation shells at the a-l interface. The observation of organic peroxides and cluster ions indicates that the aqueous surface could be a reservoir of organic peroxides and odd hydrogen radicals at night. Our findings provide new understandings of glyoxal a-l interfacial chemistry and fill in the gap between field measurements and the climate model simulation of SOA.

54 ENVIRONMENTAL SCIENCES↗

Mitigating Measurement Artifacts in TOF-SIMS Analysis of Perovskite Solar Cells

Time-of-flight secondary ion mass spectrometry (TOF-SIMS) is one of the few techniques that can specifically distinguish between organic cations such as methylammonium and formamidinium. Distinguishing between these two species can lead to specific insight into the origins and evolution of compositional inhomogeneity and chemical gradients in halide perovskite solar cells, which appears to be a key to advancing the technology. TOF-SIMS can obtain chemical information from hybrid organic-inorganic perovskite solar cells (PSCs) in up to three dimensions, while not simply splitting the organic components into their molecular constituents (C, H, and N for both methylammonium and formamidinium), unlike other characterization methods. Here, we report on the apparently ubiquitous A-site organic cation gradient measured when doing TOF-SIMS depth-profiling of PSC films. Using thermomechanical methods to cleave perovskite samples at the buried glass/transparent conducting oxide interface enables depth profiling in a reverse direction from normal depth profiling (backside depth profiling). When comparing the backside depth profiles to the traditional front side profiled devices, an identical slight gradient in the A-site organic cation signal is observed in each case. This indicates that the apparent A-site cation gradient is a measurement artifact due to beam damage from the primary ion beam causing a continually decreasing ion yield for secondary ions of methylammonium and formamidinium. This is due to subsurface implantation and bond breaking from the 30 keV bismuth primary ion beam impact when profiling with too high of a data density. Here, we show that the beam-generated artifact associated with this damage can mostly be mitigated by altering the measurement conditions. We also report on a new method of depth profiling applied to PSC films that enables enhanced sensitivity to halide ions in positive measurement polarity, which can eliminate the need for a second measurement in negative polarity in most cases.

14 SOLAR ENERGY↗

Evolution of aqSOA from the Air–Liquid Interfacial Photochemistry of Glyoxal and Hydroxyl Radicals

The effect of photochemical reaction time on glyoxal and hydrogen peroxide at the aqueous surface is investigated using in situ time-of-flights Secondary ion mass spectrometry (ToF-SIMS) enabled by a system for analysis at the liquid vacuum interface (SALVI) microreactor. Carboxylic acids (i.e., glyoxylic acid, oxalic acid, malonic acid, tartaric acid) are observed in the initial reactions (i.e., < 3 h.), more oligomers, cluster ions, and water clusters formed in the long ultraviolet (UV) aging period (i.e., = 3 h). Our results provide the direct evidence that water clusters could promote proton transfer and facilitate the formation of oligomers and cluster ions in the aqeous environment as photochemical aging continues. Furthermore, new chemical reaction pathways are proposed to expand existing understanding. The temporal evolution shows that oxidation products such as carboxylic acids reach a maximum in 1 h, whereas oligomer yields peak in 3 to 4 h. Glyoxal not only undergoes oxidation to form carboxylic acids (mainly occurred in the aging time less than 3 h), but also takes part in radical reactions, hemiacetal, oligomerization, polymerization, esterification, and anhydride reactions to form higher molecular weight species. Our in situ findings verify that the air-liquid interfacial reactions are important pathways for aqueous secondary organic aerosol (aqSOA) formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced Charge Transport by Incorporating Formamidinium and Cesium Cations into Two‐Dimensional Perovskite Solar Cells

Abstract Organic‐inorganic hybrid two‐dimensional (2D) perovskites ( n ≤5) have recently attracted significant attention because of their promising stability and optoelectronic properties. Normally, 2D perovskites contain a monocation [e.g., methylammonium (MA + ) or formamidinium (FA + )]. Reported here for the first time is the fabrication of 2D perovskites ( n =5) with mixed cations of MA + , FA + , and cesium (Cs + ). The use of these triple cations leads to the formation of a smooth, compact surface morphology with larger grain size and fewer grain boundaries compared to the conventional MA‐based counterpart. The resulting perovskite also exhibits longer carrier lifetime and higher conductivity in triple cation 2D perovskite solar cells (PSCs). The power conversion efficiency (PCE) of 2D PSCs with triple cations was enhanced by more than 80 % (from 7.80 to 14.23 %) compared to PSCs fabricated with a monocation. The PCE is also higher than that of PSCs based on binary cation (MA + ‐FA + or MA + ‐Cs + ) 2D structures.

Gao, Liguo↗

Enhanced Charge Transport by Incorporating Formamidinium and Cesium Cations into Two-Dimensional Perovskite Solar Cells

Organic-inorganic hybrid two-dimensional (2D) perovskites ( n ≤5) have recently attracted significant attention due to their promising stability and optoelectronic properties. Normally, 2D perovskites contain a mono cation (e.g., methylammonium (MA + ) or formamidinium (FA + )]. Here, we report for the first time on fabricating 2D perovskites ( n =5) with mixed cations of MA + , FA + , and cesium (Cs + ). The use of these triple cations leads to the formation of a smooth, compact surface morphology with larger grain size and fewer grain boundaries compared to the conventional MA-based counterpart. The resulting perovskite also exhibits longer carrier lifetime and higher conductivity in triple-cation 2D perovskite solar cells (PSCs). Furthermore, the power conversion efficiency (PCE) of 2D PSCs with triple cations was enhanced by more than 80% (from 7.80% to 14.23%) compared to PSCs fabricated with a mono cation; the PCE is also higher than that of PSCs based on binary-cation (MA + -FA + or MA + -Cs + ) 2D structures.

14 SOLAR ENERGY↗

Improving Charge Transport via Intermediate-Controlled Crystal Growth in 2D Perovskite Solar Cells

Reduced-dimensional hybrid perovskite semiconductors have recently attracted significant attention due to their promising stability and optoelectronic properties. However, the issue of poor charge transport in 2D perovskites limits its application. Here, studies on intermediate-controlled crystal growth are reported to improve charge carrier transport in 2D perovskite thin films. It is shown that the coordination strength of solvents with perovskite precursor affects the initial state of intermediate phase formation as well as the subsequent perovskite layer growth. Tuning the solvent composition with a mixture (5:5) of dimethyl formamide (DMF) and dimethyl sulfoxide (DMSO) leads to the growth of highly orientated 2D perovskite films with much-improved optoelectronic properties (faster transport by approx. ≈50x, longer carrier lifetime by approx. ≈4x, and lower defect density by approx. ≈30x) than the film prepared with pure DMF. Consequently, perovskite solar cells based on DMF/DMSO (5:5) show >80% efficiency improvement than the devices based on pure DMF.

14 SOLAR ENERGY↗

Enhanced Charge Transport in 2D Perovskites via Fluorination of Organic Cation

Organic-inorganic halide perovskites incorporating two-dimensional (2D) structures have shown promise for enhancing the stability of perovskite solar cells (PSCs). However, the bulky spacer cations often limit charge transport. Here, we report on a simple approach based on molecular design of the organic spacer to improve the transport properties of 2D perovskites, and we use phenethylammonium (PEA) as an example. We demonstrate that by fluorine substitution on the para position in PEA to form 4-fluorophenethylammonium (F-PEA), the average phenyl ring centroid-centroid distances in the organic layer become shorter with better aligned stacking of perovskite sheets. The impact is enhanced orbital interactions and charge transport across adjacent inorganic layers as well as increased carrier lifetime and reduced trap density. Using a simple perovskite deposition at room temperature without using any additives, we obtained a power conversion efficiency of >13% for (F-PEA) 2 MA 4 Pb 5 I 16 -based PSCs. In addition, the thermal stability of 2D PSCs based on F-PEA is significantly enhanced compared to those based on PEA.

14 SOLAR ENERGY↗

Adsorption of Molecular Nitrogen in Electrical Double Layers near Planar and Atomically Sharp Electrodes

Here, the adsorption of gas molecules at electrode–electrolyte interfaces is an important step in electrochemical reactions. Using molecular dynamics simulations, we investigate the adsorption of dissolved N 2 in the electrical double layers (EDLs) of an aqueous electrolyte near planar and 1 nm radius spherical carbon electrodes. The adsorption of N 2 is found to be overall enriched near neutral electrodes regardless of their surface curvature, although it can be locally enriched or depleted depending on the distance from the electrode surface. In comparison, the adsorption of N 2 in the EDL near negatively charged electrodes is found to increase under a moderate surface charge density, but decrease under a high surface charge density, especially near a planar electrode. By analyzing the potential of mean force for dissolved N 2 , the solvent-induced effects are found to play important roles in influencing the adsorption of N 2 in the EDLs. The adsorption behavior of N 2 molecules, especially their dependence on the surface charge and curvature of electrodes, is further rationalized by examining the structure of interfacial water molecules, their interference with the hydration shell of N 2 , and their modification by the electrification of electrodes.

42 ENGINEERING↗

Programming molecular topologies from single-stranded nucleic acids

Molecular knots represent one of the most extraordinary topological structures in biological polymers. Creating highly knotted nanostructures with well-defined and sophisticated geometries and topologies remains challenging. Here, we demonstrate a general strategy to design and construct highly knotted nucleic acid nanostructures, each weaved from a single-stranded DNA or RNA chain by hierarchical folding in a prescribed order. Sets of DNA and RNA knots of two- or three-dimensional shapes have been designed and constructed (ranging from 1700 to 7500 nucleotides), and they exhibit complex topological features, with high crossing numbers (from 9 up to 57). These single-stranded DNA/RNA knots can be replicated and amplified enzymatically in vitro and in vivo. Furthermore, this work establishes a general platform for constructing nucleic acid nanostructures with complex molecular topologies.

60 APPLIED LIFE SCIENCES↗

3D/2D multidimensional perovskites: Balance of high performance and stability for perovskite solar cells

Here, the power conversion efficiency achieved in three-dimensional (3D) perovskite solar cells (PSCs) is already competitive with that of commercial silicon solar cells. Achieving long-term stability under operation conditions is critical for reaching market success for PSC applications. Despite impressive progress over the past few years on fundamental understandings and technical innovations for improving PSC stability, the stability of PSCs against moisture/heat/light is still a key focus of research efforts for PSC development. Recent studies suggest that the long hydrophobic organic spacer in two-dimensional (2D) perovskites is helpful to improve perovskite stability, but 2D perovskites seem limited on obtaining high-performance solar cells due to its wide optical bandgaps and limited charge transport. To overcome this challenge, 3D/2D multidimensional perovskites - with an intermediate dimensionality between 3D and 2D - has recently emerged as a potential candidate to simultaneously maintain long-term stability and high performance. In this review, we first present a detailed discussion of the structure of 3D/2D multidimensional perovskites and their unique properties. Second, we discuss the stability of 3D/2D multidimensional perovskite and 2D perovskite as interface engineering layer-based solar cells. Finally, we summarize and outline the perspectives toward high-performance 3D/2D multidimensional perovskite-based solar cells.

14 SOLAR ENERGY↗