Robust Multi-fidelity Bayesian Optimization with Deep Kernel and Partition
Explore the source record for details and available documents.
Engineering topics
Publications and source records attributed to Zhang, F.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Abstract not provided
In this work, the local structure of Ni 80 X 20 (X: Cr, Mn, Pd) solid-solution alloys was investigated with x-ray absorption and total scattering x-ray diffraction methods. Atomic pair distribution function (PDF) analysis indicated that the local lattice distortion is strongly relevant to the atomic size mismatch, and the local lattice distortion in Ni80Pd20 alloy is obviously larger than that in other solid-solution alloys. The bond length of different atomic pairs was derived from the fitting of extended x-ray absorption fine structure spectra. Quantitative analysis of the local bonding environment in Ni 80 Cr 20 during Ni ion irradiation suggested that Cr atoms tend to form clusters in Ni 80 Cr 20 with the increase of ion dose.
Gd 2 Zr 2 O 7 pyrochlore with different degrees of cation disorder were synthesized by isothermal annealing at various temperatures (1100–1550 °C), and the related changes in the structure were investigated by ambient and high pressure x-ray diffraction (XRD) measurements. Unit cell parameters increase almost linearly with increasing treatment temperature. The degree of cation order in pyrochlore also increases with the increase of temperature, but saturates at ~60%. The compressibility of the pyrochlore structures decreases when the degree of cation order increases. Lastly, high pressure XRD measurements also indicate that the phase stability of Gd 2 Zr 2 O 7 is not very sensitive to the degree of atomic disorder in the pyrochlore structure.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Not Available
Two critical issues restricting the applications of NiAl precipitate-strengthened ferritic steels are their poor room temperature ductility and insufficient creep resistance at temperatures higher than 600 C. In this study, a thermodynamic modeling approach is integrated with experiments focused on investigating the ductility and creep resistance of steel alloys based on the Fe-Ni-Al-Cr-Mo multi-component system. The mechanical property studies showed that the creep resistance increases with increasing the volume fraction of B2-ordered precipitates, while the opposite trend was observed for the ductility. Low solubility of Al in the {alpha}-Fe matrix was found to favor a ductility increase. Thermodynamic calculations were used to predict the volume fraction of B2-ordered precipitate and the elemental partitioning to guide the selection of alloy compositions that might exhibit the balanced creep resistance and ductility. Key experiments were then conducted to validate the prediction. This integrated approach was found to be very effective in the alloy development.
NiAl-type precipitate-strengthened ferritic steels have been known as potential materials for the steam turbine applications. In this study, thermodynamic descriptions of the B2-NiAl type nano-scaled precipitates and body-centered-cubic (BCC) Fe matrix phase for four alloys based on the Fe-Al-Ni-Cr-Mo system were developed as a function of the alloy composition at the aging temperature. The calculated phase structure, composition, and volume fraction were validated by the experimental investigations using synchrotron X-ray diffraction and atom probe tomography. With the ability to accurately predict the key microstructural features related to the mechanical properties in a given alloy system, the established thermodynamic model in the current study may significantly accelerate the alloy design process of the NiAl-strengthened ferritic steels.
Using first-principles calculations and complementary experiments, the defect formation energies and defect concentrations were calculated as a function of pressure. The results show that at high pressure, the defect formation energies decrease with pressure for both systems. In Gd{sub 2}Ti{sub 2}O{sub 7}, the dominant defect type is cation anti-site defect, the local structure around a defect is highly distorted, and the energetically favorable defect-defect interactions at shorter distance suggest the possibility of defect clustering. In Gd{sub 2}Zr{sub 2}O{sub 7}, anion Frenkel-pair defects are favored at all pressures and the dominant defect type involving a cation is a coupled defect of a cation anti-site and an anion Frenkel-pair defect. There are only minor distortions around the defects, and the defect-defect interactions are weak, which suggests almost-ideal non-interacting defect formation. Comparison of experimentally observed defect concentrations and those based on the calculated defect formation energies suggests that the defects formed at high pressure are better estimated with a concentrated limit approximation, while those formed at ambient pressure can be evaluated at a dilute limit approximation.
Crystal structure and compressibility of potassium azide was investigated by in-situ synchrotron powder X-ray diffraction in a diamond anvil cell at room temperature up to 37.7 GPa. In the body-centered tetragonal (bct) phase, an anisotropic compressibility was observed with greater compressibility in the direction perpendicular to the plane containing N{sub 3}{sup -} ions than directions within that plane. The bulk modulus of the bct phase was determined to be 18.6(7) GPa. A pressure-induced phase transition may occur at 15.5 GPa.
The structure of K-bearing tantalate pyrochlore (K{sub 2-x}Gd{sub x})Ta{sub 2}O{sub 6+x}(x {approx} 0.4) was studied at high pressures using in situ X-ray diffraction and Raman scattering methods. Experimental results indicated that (K{sub 2-x}Gd{sub x})Ta{sub 2}O{sub 6+x}(x {approx} 0.4) retains the pyrochlore structure up to 40 GPa, but partial amorphization occurred at pressures above 23 GPa. The amorphous phase was also confirmed in the quenched sample by means of transmission electron microscopy. The tantalate pyrochlore lattice is more stable than pyrochlore compounds in other systems, such as rare earth titanates, zirconates and stannates. The structural stability of pyrochlore tantalate may be mainly related to the size ratio of cations on the 16d and 16c sites in the lattice.
Silver azide (AgN{sub 3}) was compressed up to 51.3 GPa. The results reveal a reversible second-order orthorhombic-to-tetragonal phase transformation starting from ambient pressure and completing at 2.7 GPa. The phase transition is accompanied by a proximity of cell parameters a and b, a 3{sup o} rotation of azide anions, and a change of coordination number from 4-4 (four short, four long) to eight fold. The crystal structure of the high pressure phase is determined to be in I4/mcm space group, with Ag at 4a, N{sub 1} at 4d, and N{sub 2} at 8h Wyckoff positions. Both of the two phases have anisotropic compressibility: the orthorhombic phase exhibits an anomalous expansion under compression along a-axis and is more compressive along b-axis than c-axis; the tetragonal phase is more compressive along the interlayer direction than the intralayer directions. The bulk moduli of the orthorhombic and tetragonal phases are determined to be K{sub OT} = 39{+-}5 GPa with K{sub OT'} = 10{+-}7 and K{sub OT} = 57 {+-}2 GPa with K{sub OT'} = 6.6{+-}0.2, respectively.
In situ x-ray diffraction measurements of cesium azide (CsN{sub 3}) were performed at high pressures of up to 55.4 GPa at room temperature. Three phase transitions were revealed as follows: tetragonal (I4/mcm, Phase II) {yields} monoclinic (C2/m, Phase III) {yields} monoclinic (P2{sub 1}/m or P2{sub 1}, Phase IV) {yields} triclinic (P1 or P1{sup -}, Phase V), at 0.5, 4.4, and 15.4 GPa, respectively. During the II-III phase transition, CsN{sub 3} keeps its layered structure and the azide anions rotate obviously. The compressibility of Phase II is dominated by the repulsions between azide anions. The deformation of unit cell is isotropic in Phases II and IV and anisotropic in Phase III. With increasing pressures, the monoclinic angle increases in Phase III and then becomes stable in Phase IV. The bulk moduli of Phases II, III, IV, and V are determined to be 18 {+-} 4, 20 {+-} 1, 27 {+-} 1 and 34 {+-} 1 GPa, respectively. The ionic character of alkali azides is found to play a key role in their pressure-induced phase transitions.
The structure of orthorhombic rare earth titanates of La{sub 2}TiO{sub 5} and Nd{sub 2}TiO{sub 5}, where Ti cations are in five-fold coordination with oxygen, has been studied at high pressures by X-ray diffraction (XRD), Raman scattering measurements, and quantum mechanical calculations. Both XRD and Raman results indicated two pressure-induced phase transitions during the process. An orthorhombic super cell (a x b x 2c) formed at a pressure between 6 and 10 GPa, and then transformed to a hexagonal high-pressure phase accompanied by partial decomposition. The hexagonal high-pressure phase is quenchable. Detailed structural analysis indicated that the five-coordinated TiO{sub 5} polyhedra remain during the formation of super cell, but the orthorhombic-to-hexagonal phase transition at high pressures is a reconstructive process, and the five-fold Ti-O coordination increased to more than 6. This phase transition sequence was verified by quantum mechanical calculations.